Correction: I've been using bb 1.15.2. 1.16 has mkfs_ext2 and works with no problem. But at some point I'll want to move to an even-less-out-of-date version such as 1.17 or greater, so the question still stands.
Peter On Fri, 2012-05-25 at 11:27 -0500, Peter Scheie wrote: > I've been using bb 1.16.2 to build a custom initramfs, which we use to > replace the stock initrd in Centos 5 (we do some special things we need > in the initramfs). Now I need mkfs_ext2, so I grabbed the bb 1.17.2 > that I use in another project. But I'm getting some odd behavior. The > initramfs loads fine and does all the stuff it's supposed to, after > which it does a switch_root (so the initramfs & bb are out of the > picture) and mounts the file systems from the local disk, runs the > Centos rc scripts, all which seems to go fine. But with 1.17, when udev > is started by Centos's rc.sysinit, I get an error that "DM multipath > kernel driver not loaded", and then later a modprobe warning, "Could not > open 'kernel/net/netfilter/x_tables.ko': no such file or directory" > followed by another modprobe error, "FATAL: Error inserting ip_tables > (kernel/net/ipv4/netfilter.ko: no such file or directory", even though > both those files are on the disk. And of course, iptables then won't > run. > > Any ideas as to what changed between 1.16 and 1.17 that would cause > this? I also tried 1.17.4 and got the same results. Thanks. > > Peter > > _______________________________________________ > busybox mailing list > [email protected] > http://lists.busybox.net/mailman/listinfo/busybox _______________________________________________ busybox mailing list [email protected] http://lists.busybox.net/mailman/listinfo/busybox
