in setserial there is a typo baund_base it should be baud_base.
for example:
setserial /dev/ttyS4 uart 16550A port 0x0208 irq 5 baund_base 115200
spd_normal skip_test
The patch fixes the usage message and adds the baud_base option but
leaves baund_base as option to avoid breaking existing setups.
Greetings
Christoph
--- busybox-1.21.0/miscutils/setserial.c 2012-12-22 23:39:01.000000000
+0100
+++ busybox-1.21.0.new/miscutils/setserial.c 2013-03-22 15:35:35.301870105
+0100
@@ -223,7 +223,7 @@
//usage: " -v Verbose\n"
//usage: "\n"
//usage: "Parameters: (* = takes an argument, ^ = can be turned off
by preceding ^)\n"
-//usage: " *port, *irq, *divisor, *uart, *baund_base, *close_delay,
*closing_wait,\n"
+//usage: " *port, *irq, *divisor, *uart, *baud_base, *close_delay,
*closing_wait,\n"
//usage: " ^fourport, ^auto_irq, ^skip_test, ^sak,
^session_lockout,
^pgrp_lockout,\n"
//usage: " ^callout_nohup, ^split_termios, ^hup_notify,
^low_latency,
autoconfig,\n"
//usage: " spd_normal, spd_hi, spd_vhi, spd_shi, spd_warp,
spd_cust\n"
@@ -311,6 +311,7 @@
"irq\0"
"divisor\0"
"uart\0"
+ "baud_base\0"
"baund_base\0"
"close_delay\0"
"closing_wait\0"
@@ -343,6 +344,7 @@
CMD_DIVISOR,
CMD_UART,
CMD_BASE,
+ CMD_BASE,
CMD_DELAY,
CMD_WAIT,
_______________________________________________
busybox mailing list
[email protected]
http://lists.busybox.net/mailman/listinfo/busybox
