Greetings Christophe, thanks for your help, see inline.
On 12/19/2013 09:05 PM, Christophe Blaess wrote: > On 19/12/2013 16:54, Eial Czerwacki wrote: >> Hello, >> >> I have a busybox version 1.19.2 built using buildroot running on a small >> usb as rescue image. >> >> previously I Was running kernel 2.6.38.8 and all worked great, due to >> drivers missing I was asked to upgrade the rescue usb image's kernel to >> 3.12.5. >> >> following the upgrade, I've encountered two issues: >> 1. I lost the ability to type the console, e.g. when I trying to >> type something via the keyboard, I don't get anything, echoing to tty0 >> prints the output to the screen but doing the same to ttyS0, how can >> I fix >> this? where should I start looking? the kernel diff between >> the to kernel version doesn't seems to yield any usable info. > > Is it a USB keyboard and does it need to load a driver as module? yes, all US modules are loaded, I'm pretty sure it is a usb keyboard. I'm working on the machines in remote so I'll have to verify > > >> 2. all the script that were executed in 2.6.38.8 ok, needs to have >> /bin/sh before them or else I see this: >> $ /etc/init.d/detect_flash >> detect_flash: applet not found >> any ideas how to fix it? > > Does you script start with a "shebang line" (i.e. "#! /bin/sh")? > yes, as stated before, the same script that worked on the same busybox but with kernel 2.6.38.8 exhibits problems on kernel 3.12.5 > > _______________________________________________ > busybox mailing list > [email protected] > http://lists.busybox.net/mailman/listinfo/busybox > _______________________________________________ busybox mailing list [email protected] http://lists.busybox.net/mailman/listinfo/busybox
