Hi,
Linux version 2.6.26.5, ARM Linux Kernel on embedded device.
How to manually set up Ethernet connection from BusyBox v1.10.2 rescue shell
(ash)?
I mounted the main virtual file systems, then tried:
# ifconfig lo 127.0.0.1
# ifconfig eth0 hw ether 88:75:56:05:2B:24
# ifconfig eth0 192.168.15.1 netmask 255.255.255.0 broadcast 192.168.15.255
# ifconfig eth0 up
# route add -net 192.168.15.0/24 eth0
# ifconfig eth0
eth0 Link encap:Ethernet HWaddr 88:75:56:05:2B:24
inet addr:192.168.15.1 Bcast:192.168.15.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
Interrupt:22
# ping 192.168.15.100
PING 192.168.15.100 (192.168.15.100): 56 data bytes
>From 192.168.15.100 icmp_seq=0 timed out
... ...
Device is also unreachable when ping it from computer.
ping 192.168.15.1
connect: Network is unreachable
Regards,
_______________________________________________
busybox mailing list
[email protected]
http://lists.busybox.net/mailman/listinfo/busybox
