Rob,
I, as a new-by to HF figured it out. Try this. As long as you have Dual VFO it is a piece of cake. Set the radio to a frequency on "A". Then push A=B. Then A/B. This will swap from A to B and when pushed again it will go back. If the other station is listening "up 5" then adjust the B frequency up 5 Khz. Then go back to A. As long as you hear the station you want to QSO ... good. Then push the "SPLIT" button. What happens next is that every time you key it switches automatically to the B and when you un-key it will go back to A. Just remember to make sure the radio is tuned to lowest SWR. When you want to work the next station push the SPLIT button again to turn off the split function. Most important.... MAKE SURE THAT YOU ARE NOT IN SPLIT MODE WHEN YOU SWITCH BANDS. Otherwise you will be operating cross band and could fry the radio. Hope this helps. 73 de Scott KD5FBA Scott Medbury ARRL AMSAT #33657 B-VARC (Brazos Valley Amateur Radio Club) 10-10 International #77047 Scott Medbury 16802 Aprilmont Drive Sugar Land, TX 77498-1941 USA Centennial Sticker Decal web-03
_______________________________________________ BVARC mailing list [email protected] http://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org
