The meeting takes place at the Shriner's hall on the left side of eldridge. This is about 1/2 mile after you . Turn on to eldridge. There is a large church on the left side and we use their parking for the event.
If you have problems get on the radio. Jo.L. KE7NSB On Wed, Oct 11, 2017 at 9:42 PM, John Parmalee via BVARC <[email protected]> wrote: > I have never attended one of your meetings, The yagi presentation is > inviting enough for me to come from Montgomery county. Tell me where and > when please. > > John Parmalee > [email protected] > 281-380-3811 <(281)%20380-3811> > K5VGM WI2XLJ > > > *From:* Mike Hardwick via BVARC > *Sent:* Tuesday, October 10, 2017 22:11 > *To:* BRAZOS VALLEY AMATEUR RADIO CLUB > *Cc:* Mike Hardwick > *Subject:* [BVARC] General Meeting Program Information for Thursday, > October 12, 2107 > > > > > > Sorry for the late notice but Hurricane Harvey is still affecting many > club members around Houston. I hope everyone will be able to attend the > meeting for these two interesting programs. > > > > > > Program 1 – “The History of the Yagi-Uda Antenna Array” > > > > The Radio Hotel will present "The History of the Yagi-Uda Antenna Array" > in slides and song. A short eight minute Power Point 'show' highlighting > the invention, the inventors and the Radio Ham's practical implementation > and refinement of this mid-1920's antenna discovery. > > > > If you saw "Here Comes the Sun" a few years back, then you will not want > to miss this new fun and informative short from the Smoking Crow > Productions studio. > > > > Hope to see you at the meeting. > > Rick Hiller, W5RH > > > > > > > > Program 2 – “Introduction to surface mount assembly” > > > > Bali Educational Programs will have general discussions surface mount > assembly. The program will start with an explanation of why surface mount > assembly is easier and faster than through-hole assembly. Even though there > not be any surface mount soldering, the program will have description of > the process and techniques with boards that were assembled. Descriptions > will be discussed on what can be done differently when designing and > building with surface mount components. The program will cover resources > for designing boards and getting them fabricated cheaply. > > > > Some of the points that will be covered are > > > > - Sample boards > > - Equipment recommendations > > - Soldering and de-soldering techniques > > - Design recommendations for specific components > > - Board design resources > > > > If there is enough interest, a program will be held in the near future > covering the following: > > > > Controllers, program and designs from a low level for PIC and Atmel to > Arduino to Raspberry Pi using modules and code libraries and other Linux > options. Information will also be present on > > highly-integrated system-on-chip modules like ESP8266 and ESP32. > Information will be presented on various inputs and outputs like sensors, > relays, MOSFETs, stepper and servo motors, etc. > > > > Love to have you at the presentation, > > Donovan Bali, KG5BDZ > > > > > > I hope everyone can make it to the meeting. Both Donovan and Rick have > really worked getting information together for their programs. > > Hope you can make it to the meeting. > > > > Mike > > XN5VCD > > > > > > > > ------------------------------ > _______________________________________________ > BVARC mailing list > [email protected] > http://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org > Message delivered to [email protected] > > _______________________________________________ > BVARC mailing list > [email protected] > http://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org > Message delivered to [email protected] > > _______________________________________________ > BVARC mailing list > [email protected] > http://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org > Message delivered to [email protected] > > _______________________________________________ > BVARC mailing list > [email protected] > http://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org > Message delivered to [email protected] > > > _______________________________________________ > BVARC mailing list > [email protected] > http://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org > Message delivered to [email protected] > >
_______________________________________________ BVARC mailing list [email protected] http://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org Message delivered to [email protected]
