Bob . Larry Brand kb5pnu . I have a Hi Lift jack around 4' and a pickup truck . I would not be able to help a lot . right fingers went between elevator and wall in 2008 . Live in Stafford , Tx . home 281 - 969-5212 . I would want it back .
On Thu, Mar 15, 2018 at 10:13 AM, Scott Medbury via BVARC <[email protected]> wrote: > Yes, I have a tractor jack. Can bring to hamfest. > > Scott KD5FBA > > *Sent from my Verizon Motorola Droid* > On Mar 15, 2018 8:17 AM, Keith Dutson via BVARC <[email protected]> wrote: > > I had an old fence where some t-posts were sheered off by a bulldozer > clearing the land. I used an old blade from a mower, to hook on to the top > of each post. A strong, welded-link chain was wrapped around the front-end > loader of the tractor and around the mower blade. > > I also had some old posts that were removed using only the chain. > > Of course, this operation was much faster than using a tractor jack. > > 73, Keith NM5G > > *From:* BVARC <[email protected]> *On Behalf Of *Bob Hawkins via > BVARC > *Sent:* Wednesday, March 14, 2018 11:13 PM > *To:* BRAZOS VALLEY AMATEUR RADIO CLUB <[email protected]> > *Cc:* Bob Hawkins <[email protected]> > *Subject:* [BVARC] tractor jack anybody? > > Howdy, > > I want to pull up some fence post out of the ground that are broken off at > the ground level. I am thinking that a chain secured with a bolt through > the post and lifted with a tractor jack will do the trick. One problem > here. I don't have a tractor jack. Anybody have one I can borrow for a few > days? > > > > > Bob Hawkins > > [email protected] > > 281-827-9135 <(281)%20827-9135> > > Facebook:www.facebook.com/bob.hawkins.12 > > KD5AT on 146.940 pl 167.9 > > > _______________________________________________ > BVARC mailing list > [email protected] > http://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org > Message delivered to [email protected] > >
_______________________________________________ BVARC mailing list [email protected] http://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org Message delivered to [email protected]
