This is true if you are talking VHF/UHF.  When talking HF, PL259 is the 
preferred connector.

 

BTW, all connections placed outdoor should be sealed against moisture.  I know 
of no connector that is water resistant enough to prevent eventual moisture 
intrusion, a definite performance killer.

 

73, Keith NM5G

 

From: BVARC <[email protected]> On Behalf Of Gus Bernard via BVARC
Sent: Wednesday, November 25, 2020 9:13 AM
To: BRAZOS VALLEY AMATEUR RADIO CLUB <[email protected]>
Cc: Gus Bernard <[email protected]>
Subject: [BVARC] Fwd: [NewHams] RF Connectors / test equipment connectors from 
WA1MBA

 

See link below frm Dan Marler @ newhams groups.io <http://groups.io> .

 

BTW, for some time I've been converting all connectors in my shack (& portable 
gear) to Type N:  With the exception of panel connectors on the back of 
purchased gear, all antenna switches, coax, baluns, ununs, lightning protection 
and other gear and accessories are purchased with Type N installed.  This 
involves purchasing or making a collection of adapters and jumper cables. 

 

The project started because I often needed to make jumpers to interface my own 
ham accessories (antennas, switches, feedline, etc.) to my issued Civil Air 
Patrol radios and antennas.   I've since spoken to others doing the same thing; 
if you have a lot of gear (interconnections), I recommend you consider it, too.

 

Type N connectors are better than PL-259 for several reasons, including the 
fact that they're much easier to assemble properly and are much more moisture 
resistant when used outdoors. The connectors are slightly more expensive, but I 
believe the advantages outweigh this slight increase in cost.

 

73,

Gus KG5OFB

 

 

---------- Forwarded message ---------
From: RATPAC Planning <[email protected] <mailto:[email protected]> >
Date: Wed, Nov 25, 2020 at 2:27 PM
Subject: [NewHams] RF Connectors / test equipment connectors from WA1MBA
To: <[email protected] <mailto:[email protected]> >

 

Everything you ever wanted to know about RF Connectors.

 

http://www.wa1mba.org/rfconn.htm

 

~Dan

 

Dan Marler, K7REX

[email protected] <http://[email protected]> 

 



 

_._,_._

  _____  

________________________________________________
Brazos Valley Amateur Radio Club

BVARC mailing list
[email protected]
http://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org

Reply via email to