*Marty,
The 147.000 repeater does not send out CTCSS on it's carrier. You should
reprogram your radio to receive the machine in carrier squelch only, no
CTCSS decode. That will fix the issue. Good luck with the event and
thanks for volunteering.
N5ZUA
*
On 5/2/2021 3:57 PM, Martin Blaise via BVARC wrote:
Today I was helping with the Arc bike ride Tour duRouge and we were on
the 147.000 repeater. I was able to transmit with the ht using an
adapter and a magnet mount antenna on top of the car. However I was
only able to hear anyone if I pressed in the squelch button on the
side of the ht. I programmed various squelch settings but nothing
worked except pressing the side button. Again all good on the transmit
side. Anyone have a fix? I do notice it’s only doing this on two
meters. When I transmit on frequencies like 442.000 it does break the
squelch and send the ID audio and other uhf repeaters the same. I’ve
double checked settings and checked the manual so hope someone might
see what I missed thanks Marty AG5T
________________________________________________
Brazos Valley Amateur Radio Club
BVARC mailing list
[email protected]
http://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org
Publicly available archives are available here:
https://www.mail-archive.com/[email protected]/
________________________________________________
Brazos Valley Amateur Radio Club
BVARC mailing list
[email protected]
http://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org
Publicly available archives are available here:
https://www.mail-archive.com/[email protected]/
