Steve,
No, I have a test cable with an SMA female end and I need to connect it
to an amplifier that has a SO239 female socket.
I've want to keep down the loss and would prefer just one adapter.
Mike
On 5/13/2021 1:16 PM, Steve Agee via BVARC wrote:
*When you say a PL259, that implies a male UHF. Did you by chance mean
you actually wanted a female UHF, which would be an SO-239, to male
SMA adapter?
N5ZUA
*
On 5/13/2021 12:25 PM, Mike Lambert via BVARC wrote:
I thought I would try this before going to mail order to find just
one connector.
I need a PL259 to SMA male connector. If someone has one to sell, I
can pick it up and pay cash.
Thanks and 73s
Mike
KI5PIY
________________________________________________
Brazos Valley Amateur Radio Club
BVARC mailing list
[email protected]
http://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org
Publicly available archives are available here:
https://www.mail-archive.com/[email protected]/
________________________________________________
Brazos Valley Amateur Radio Club
BVARC mailing list
[email protected]
http://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org
Publicly available archives are available here:
https://www.mail-archive.com/[email protected]/
________________________________________________
Brazos Valley Amateur Radio Club
BVARC mailing list
[email protected]
http://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org
Publicly available archives are available here:
https://www.mail-archive.com/[email protected]/
