They used to have the stuff at Bering’s on Westheimer of all places. Not cheap 
look on internet. I was using much shorter lengths. 

https://www.e-rigging.com/quarter-X-200-foot-Stainless-Cable

Chris Luppens KG5BBF


> On Oct 18, 2021, at 8:46 PM, Bill Cordell via BVARC <bvarc@bvarc.org> wrote:
> 
> 
> Allen:
> I would use ¼” stainless steel aircraft wire rope.  Do not where to get it.  
> I would try ye ole internet…
> Bill
>  
> From: BVARC <bvarc-boun...@bvarc.org> On Behalf Of Jimmy Vance via BVARC
> Sent: Monday, October 18, 2021 4:04 PM
> To: Allen Brier via BVARC <bvarc@bvarc.org>
> Cc: Jimmy Vance <jimmy.va...@gmail.com>
> Subject: Re: [BVARC] Recabling a Hy-Gain HG70HD
>  
> Think it is backwards standard 1/4 wire rope breaking strength is 7,000 lbs 
> and 3/16 is 4200 for 7x19 galvanized.   You can buy cable at Home Depot or 
> Lowes and make your own cables.  You could try Alps Wire Rope or Southwest 
> Wire Rope but I'd suspect they are premium priced.   You might check with 
> Bill Cordell to see if he knows anyone
> 
> --jv
> 
> On 10/18/2021 3:24 PM, Allen Brier via BVARC wrote:
> I have an HG70HD tower that has been in service for 15 years. When I bought 
> it used, it was probably at least that old already if not much older. I found 
> one of the cables in the tower has frayed, so down it stays until I can get 
> it recabled.
>  
> Has anyone recabled an HG70HD? Can you give me some information and tips 
> please?
>  
> I found the following information in the manual. I am hoping someone can 
> confirm these dimensions:
>  
> Item 4 p/n 690346: CABLE 1/4” x 59-1/2
> Item 5 p/n 690198: CABLE 1/4” x 20-1/2
> Item 6 p/n 690197: CABLE 3/16 x 20-1/2
>  
> I called MFJ. “Tom” told me the cables are: 1/4” 4200 lbs breaking strength; 
> 3/16” 7000 lbs breaking strength.
>  
> Now I need to find a shop that can build the cables or find someone who may 
> have these parts. Any suggestions or recommendations? I live SW of Houston, 
> Texas. I am also attaching all the information I have on hand so far. I am 
> also copying the manual and drawings sent by MFJ as reference.
>  
> Allen R. Brier N5XZ
> 1515 Windloch Lane
> Richmond, TX 77406
> 713-705-4801
>  
> 
> 
> ________________________________________________
> Brazos Valley Amateur Radio Club
>  
> BVARC mailing list
> BVARC@bvarc.org
> http://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org
> Publicly available archives are available here: 
> https://www.mail-archive.com/bvarc@bvarc.org/ 
>  
> ________________________________________________
> Brazos Valley Amateur Radio Club
> 
> BVARC mailing list
> BVARC@bvarc.org
> http://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org
> Publicly available archives are available here: 
> https://www.mail-archive.com/bvarc@bvarc.org/ 
________________________________________________
Brazos Valley Amateur Radio Club

BVARC mailing list
BVARC@bvarc.org
http://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org
Publicly available archives are available here: 
https://www.mail-archive.com/bvarc@bvarc.org/ 

Reply via email to