A little help please!
I normally connect my Anan 7000 transceiver to an eight port switch where it
connects with the computer that controls the transceiver. It has worked
perfectly for months. But I am now seeing error messages indicating short
intermittent sequence errors (dropped packets I suppose you would call it)
between the radio and the computer. As you would expect, the audio drops out
when the errors occur.
First step in my process of elimination was to circomvent the switch and
connect the radio directly to the computer. That killed all sequence errors and
all worked as it should. Next step in the process was to reconnect the computer
and the radio to the switch, but remove the ethernet surge protector from the
run between the switch and the radio. That made no difference and the errors
resumed. Now I figure it's got to be bad ethernet cable or the switch needs to
be replaced.
Any thoughts on this from my computer savvy ham friends?
73, JP, K5JPP
________________________________________________
Brazos Valley Amateur Radio Club
BVARC mailing list
[email protected]
http://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org
Publicly available archives are available here:
https://www.mail-archive.com/[email protected]/
