Re: [BVARC] In search of 450 Ohm ladder line

k9cfa01--- via BVARC Sat, 18 Oct 2025 04:41:41 -0700

Hello,

The mill that was the only one make ladder line in the US shutdown about 2 years ago. No one picked up the line.

Just an FYI.

Chuck

From: BVARC <[email protected]> on behalf of John Parmalee via BVARC <[email protected]>
Date: Tuesday, September 23, 2025 at 1:03 PM
To: BRAZOS VALLEY AMATEUR RADIO CLUB <[email protected]>
Cc: [email protected] <[email protected]>
Subject: Re: [BVARC] In search of 450 Ohm ladder line

Try making some, you tube has some examples. I used a cheep ball point pens less its guts. I used a wire tie double through the tube to secure the wire.

From: BVARC <[email protected]> On Behalf Of Daniel Poirot via BVARC
Sent: Tuesday, September 23, 2025 10:35 AM
To: BRAZOS VALLEY AMATEUR RADIO CLUB <[email protected]>
Cc: Daniel Poirot <[email protected]>
Subject: [BVARC] In search of 450 Ohm ladder line

Howdy y’all,

None at EPO. Most places online are out of stock!

DC Engineering shows some by the foot. Crazy!

Only looking for 2 meters of the stuff…

Dan KJ5IZK

________________________________________________
Brazos Valley Amateur Radio Club


BVARC mailing list
[email protected]
http://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org
Publicly available archives are available here: 
https://www.mail-archive.com/[email protected]/

Re: [BVARC] In search of 450 Ohm ladder line

Reply via email to