Re: [BVARC] ICom 880 set up for frerq and pl tone for the new repeater

[m m via BVARC]

Hello Dwayne, Thank you for thinking of me sir. I know I have been absent for awhile. I hit the repeater with my handheld in my kitchen this morning. I need to program this into my mobile as well.  Sent to you  On Jan 22, 2026, at 7:49 AM, Dwayne Jones via BVARC <bvarc@bvarc.org> wrote:  Hi Jerry long time no hear.  146.880  Offset is negative 600 kHz Tone is 167.9 So when keyed up display should read 146.280 With an outside antenna you should hit the repeater with low or mid power. Dwayne KB5YTA On Thu, Jan 22, 2026 at 4:12 AM AOL/ CompuServe Mail via BVARC <bvarc@bvarc.org> wrote: Hay guys.       I just pulled out my old 880 and loaded the rt systems sw.  I need the receive and xmit freq that you all are going to use for the stormI will also need the offset so i can load the freq into the 880.   Please help a struggling old man (82) Gerald Muller  K9GEM 7133056922 gmuller...@aol.com ________________________________________________ Brazos Valley Amateur Radio Club BVARC mailing list BVARC@bvarc.org http://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org Publicly available archives are available here: https://www.mail-archive.com/bvarc@bvarc.org/ ________________________________________________ Brazos Valley Amateur Radio Club BVARC mailing list BVARC@bvarc.org http://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org Publicly available archives are available here: https://www.mail-archive.com/bvarc@bvarc.org/

________________________________________________
Brazos Valley Amateur Radio Club

BVARC mailing list
BVARC@bvarc.org
http://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org
Publicly available archives are available here: 
https://www.mail-archive.com/bvarc@bvarc.org/