Hi Ethan, Here is output from one of system. Do you need any other info or access to the systm ? Thank you for your help.
Emma sca-maramba-8-sp> console -f Enter #. to return to ALOM. opensolaris console login: root Password: Login incorrect opensolaris console login: root Password: Last login: Fri May 1 21:01:48 on console May 4 14:19:42 opensolaris login: ROOT LOGIN /dev/console Sun Microsystems Inc. SunOS 5.11 snv_111a November 2008 root at opensolaris:~# zpool list NAME SIZE USED AVAIL CAP HEALTH ALTROOT rpool 136G 15.9G 120G 11% ONLINE - root at opensolaris:~# root at opensolaris:/tmp# cat install_log <AI May 2 03:57:33> /tmp/ai_combined_manifest.xml is a valid manifest <AI May 2 03:57:33> Auto reboot disabled <OM May 2 03:57:54> System reports enough physical memory for installation, swap is optional <AI May 2 03:57:54> Checking any disks for minimum recommended size of 12646 MB<AI May 2 03:57:54> Disk c7t0d0 size listed as 140009 MB <AI May 2 03:57:54> Default disk selected is c7t0d0 <AI May 2 03:57:54> Disk name selected for installation is c7t0d0 <AI May 2 03:57:54> no manifest slice information found <OM May 2 03:57:54> Timezone setting will be TZ=US/Pacific <OM May 2 03:57:54> Set timezone <AI May 2 03:57:54> installation will be performed from http://ipkg.sfbay.sun.com/dev/ (opensolaris.org) <AI May 2 03:57:54> installation will be performed from http://ipkg.sfbay.sun.com/dev/ (opensolaris.org) <AI May 2 03:57:54> list of packages to be installed is: <AI May 2 03:57:54> entire <AI May 2 03:57:54> SUNWcsd <AI May 2 03:57:54> SUNWcs <AI May 2 03:57:54> babel_install <AI May 2 03:57:54> list of packages to be removed is: <AI May 2 03:57:54> babel_install <AI May 2 03:57:54> slim_install <OM May 2 03:57:54> Set zfs root pool device <OM May 2 03:57:54> creating zpool <OM May 2 03:57:56> /usr/sbin/zfs get -Hp -o value available rpool <OM May 2 03:57:56> Creating swap and dump on ZFS volumes <TIBEM_E May 2 03:58:07> be_init() failed with error code 4044 <OM May 2 03:58:07> Could not create BE target <OM May 2 03:58:07> TI process failed <OM May 2 03:58:07> Target instantiation failed exit_val=-1 <AI May 2 03:58:14> om_perform_install failed with error 208 <AI May 2 03:58:14> Auto install failed root at opensolaris:/tmp# Thanks, Emma On 05/04/09 14:11, Ethan Quach wrote: > > > Emma Lee wrote: >> Hi Ethan, >> >> Thank you for helping. I am losting network on the system now, but I >> will send out zpool list output once I get the network back. >> >> Thanks, >> Emma >> >> On 05/04/09 12:23, Ethan Quach wrote: >>> Emma, >>> >>> After the failure, can you do a "zpool list" to make sure the pool was >>> created properly. If that succeeds, can you give the output of "zfs >>> list". >>> >>> Do these failures only happen on sparc? >>> >>> Can you run this in debug mode to get some additional data: >>> >>> sparc: "boot net:dhcp install_debug=enable > > Scratch the install_debug part. Enabling debug mode on Sparc > doesn't seem to have been implemented like this. You have to > manually edit the install.conf file in the AI image on your server. > If you have access to this, then edit the <imagedir>/install.conf > to include a line that says: > > install_debug=enable > > If you don't have access to do this, getting the data withough > debug info will also be very useful. > > thanks, > -ethan > > > >>> >>> x86: edit the menu entry and add "install_debug=enable" to the >>> kernel line >>> >>> >>> Attach the /tmp/install_log and /var/svc/log/*install* files, and >>> whatever shows up on the console too. >>> >>> >>> thanks, >>> -ethan >>> >>> >>> Emma Lee wrote: >>>> Hi, >>>> >>>> We have seen 3 installations with "be_init() failed with error code >>>> 4044". Will anyone help to resolve this issue ?? >>>> >>>> >>>> Thanks, >>>> Emma >>>> >>>> guest domain installation log: >>>> ==================== >>>> 100%[====================================>] 3,870,720 --.--K/s >>>> >>>> 18:59:17 (26.24 MB/s) - `/tmp/solarismisc.zlib' saved >>>> [3870720/3870720] >>>> >>>> --18:59:17-- >>>> http://10.7.81.4:5555/export/aiserver/osol-0906-111a-ai-sparc/install.conf >>>> >>>> => `/tmp/install.conf' >>>> Connecting to 10.7.81.4:5555... connected. >>>> HTTP request sent, awaiting response... 200 OK >>>> Length: 68 [text/plain] >>>> >>>> 100%[====================================>] 68 --.--K/s >>>> >>>> 18:59:17 (1.46 MB/s) - `/tmp/install.conf' saved [68/68] >>>> >>>> Done mounting automated install image >>>> Configuring devices. >>>> Reading ZFS config: done. >>>> May 1 18:59:33 svc.startd[7]: svc:/platform/sun4u/sckmd:default: >>>> Method "/lib/svc/method/svc-sckmd" failed with exit status 98. >>>> May 1 18:59:34 svc.startd[7]: svc:/platform/sun4u/sckmd:default: >>>> Method "/lib/svc/method/svc-sckmd" failed with exit status 98. >>>> May 1 18:59:35 svc.startd[7]: svc:/platform/sun4u/sckmd:default: >>>> Method "/lib/svc/method/svc-sckmd" failed with exit status 98. >>>> May 1 18:59:35 svc.startd[7]: platform/sun4u/sckmd:default failed: >>>> transitioned to maintenance (see 'svcs -xv' for details) >>>> May 1 18:59:36 svc.startd[7]: svc:/platform/sun4u/dscp:default: >>>> Method "/lib/svc/method/svc-dscp start" failed with exit status 96. >>>> May 1 18:59:36 svc.startd[7]: platform/sun4u/dscp:default >>>> misconfigured: transitioned to maintenance (see 'svcs -xv' for >>>> details) >>>> >>>> opensolaris console login: May 1 18:59:45 opensolaris >>>> mDNSResponder: Local Hostname opensolaris.local already in use; >>>> will try opensolaris-2.local instead >>>> May 1 18:59:46 opensolaris mDNSResponder: Local Hostname >>>> opensolaris-2.local already in use; will try opensolaris-3.local >>>> instead >>>> May 1 18:59:46 opensolaris mDNSResponder: Local Hostname >>>> opensolaris-3.local already in use; will try opensolaris-4.local >>>> instead >>>> May 1 18:59:46 opensolaris mDNSResponder: Local Hostname >>>> opensolaris-4.local already in use; will try opensolaris-5.local >>>> instead >>>> Service discovery phase initiated >>>> Service name to look up: osol-111a-sparc >>>> Service discovery finished successfully >>>> Process of obtaining configuration manifest initiated >>>> Configuration manifest obtained >>>> Automated Installation started >>>> The progress of the Automated Installation can be followed by >>>> viewing the logfile at /tmp/install_log >>>> Automated Installation failed >>>> Please refer to /tmp/install_log file for details >>>> May 1 19:00:22 opensolaris svc.startd[7]: >>>> application/auto-installer:default failed fatally: transitioned to >>>> maintenance (see 'svcs -xv' for details) >>>> >>>> opensolaris console login: root >>>> Password: >>>> May 1 19:00:42 opensolaris login: ROOT LOGIN /dev/console >>>> Sun Microsystems Inc. SunOS 5.11 snv_111a November 2008 >>>> root at opensolaris:~# cat /tmp/install_log >>>> <AI May 2 02:00:02> /tmp/ai_combined_manifest.xml is a valid manifest >>>> <AI May 2 02:00:02> Auto reboot disabled >>>> <TDDM_E May 2 02:00:02> ddm_drive_is_cdrom(): >>>> ioctl(DKIOCREMOVABLE) failed >>>> <OM May 2 02:00:12> System reports enough physical memory for >>>> installation, swap is optional >>>> <AI May 2 02:00:12> Checking any disks for minimum recommended >>>> size of 12646 MB<AI May 2 02:00:12> Disk c6d0 size listed as 16384 MB >>>> <AI May 2 02:00:12> Default disk selected is c6d0 >>>> <AI May 2 02:00:12> Disk name selected for installation is c6d0 >>>> <AI May 2 02:00:12> no manifest slice information found >>>> <OM May 2 02:00:12> Timezone setting will be TZ=US/Pacific >>>> <OM May 2 02:00:12> Set timezone >>>> <AI May 2 02:00:12> installation will be performed from >>>> http://ipkg.sfbay.sun.com/dev/ (opensolaris.org) >>>> <AI May 2 02:00:12> installation will be performed from >>>> http://ipkg.sfbay.sun.com/dev/ (opensolaris.org) >>>> <AI May 2 02:00:12> list of packages to be installed is: >>>> <AI May 2 02:00:12> entire >>>> <AI May 2 02:00:12> SUNWcsd >>>> <AI May 2 02:00:12> SUNWcs >>>> <AI May 2 02:00:12> babel_install >>>> <AI May 2 02:00:12> list of packages to be removed is: >>>> <AI May 2 02:00:12> babel_install >>>> <AI May 2 02:00:12> slim_install >>>> <OM May 2 02:00:12> Set zfs root pool device >>>> <OM May 2 02:00:12> creating zpool >>>> *<OM May 2 02:00:15> /usr/sbin/zfs get -Hp -o value available rpool >>>> <OM May 2 02:00:15> Creating swap and dump on ZFS volumes >>>> <TIBEM_E May 2 02:00:18> be_init() failed with error code 4044 >>>> <OM May 2 02:00:18> Could not create BE target >>>> <OM May 2 02:00:18> TI process failed * >>>> <OM May 2 02:00:18> Target instantiation failed exit_val=-1 >>>> <AI May 2 02:00:22> om_perform_install failed with error 208 >>>> <AI May 2 02:00:22> Auto install failed >>>> root at opensolaris:~# >>>> ------------------------------------------------------------------------ >>>> >>>> >>>> _______________________________________________ >>>> caiman-discuss mailing list >>>> caiman-discuss at opensolaris.org >>>> http://mail.opensolaris.org/mailman/listinfo/caiman-discuss >>>> >>
