Hi Matt,
the similar behavior was seen on some sun4v machines, but
not hit yet on sun4u - see bug 14322 for more details.
Since you are able to import the pool, could you please
check if boot_archive was generated ?
# zpool import -f <pool_name>
# beadm mount opensolaris /a
# ls -l /a/platform/sun4u/
Could you please also attach install_log file located in
/a/var/sadm/system/logs/install_log ?
Thank you,
Jan
On 02/ 8/10 05:13 AM, Matt Hatley wrote:
> I'm using the text installer on a V210 with OpenBoot v4.22.33 (latest
> available)& B131. Install seems to go fine. The reboot after installation
> fails with this error:
> The file just loaded does not appear to be executable.
> If I reboot off the CD& exit to the shell, I can import the rpool that was
> built during the TTY install. I've tried this w/ 2 different disks.
>
> Any ideas? The console sequence is included below.
>
> TIA,
>
> Matt
>
> ---------------------------------------------------------------------------------------------------------
>
> {1} ok boot disk0
>
> SC Alert: Host System has Reset
> Probing system devices
> Probing memory
> Probing I/O buses
> Sun Fire V210, No Keyboard
> Copyright 2007 Sun Microsystems, Inc. All rights reserved.
> OpenBoot 4.22.33, 5120 MB memory installed, Serial #54938117.
> Ethernet address 0:3:ba:46:4a:5, Host ID: 83464a05.
> Rebooting with command: boot disk0
> Boot device: /pci at 1c,600000/scsi at 2/disk at 0,0 File and args:
>
> The file just loaded does not appear to be executable.
>
> {1} ok
