I have a T3-1 which fails to identify the root disk for AI install on snv_151
Does anyone have a work-around for this?
format sees and can seek the drive, so the driver appears ok
SPARC T3-1, No Keyboard
Copyright (c) 1998, 2010, Oracle and/or its affiliates. All rights reserved.
OpenBoot 4.32.2.build_10, 32256 MB memory available, Serial #92425988.
Ethernet address 0:21:28:82:4f:4, Host ID: 85824f04.
~
solaris console login: Automated Installation failed
Please refer to /tmp/install_log file for details
Nov 5 16:58:29 solaris svc.startd[7]: application/auto-installer:default
failed fatally: transitioned to maintenance (see 'svcs -xv' for details)
solaris console login: root
Password:
Nov 5 16:58:39 solaris login: ROOT LOGIN /dev/console
Oracle Corporation SunOS 5.11 snv_151 October 2010
r...@solaris:~# tail /tmp/install_log
<AI Nov 5 16:58:21> /tmp/ai_combined_manifest.xml manifest created
<AI Nov 5 16:58:21> /tmp/ai_combined_manifest.xml manifest setup and validated
<AI Nov 5 16:58:21> Auto reboot enabled
<AI Nov 5 16:58:21> Warning: ignoring manifest element partition
action='use_existing' on SPARC
<AI Nov 5 16:58:21> Initiating Target Discovery...
<AI Nov 5 16:58:28> Target Discovery finished successfully
<AI Nov 5 16:58:28> Boot disk specified as installation target, but the boot
disk was not found
<AI Nov 5 16:58:28> ai target device not found
r...@solaris:~# format
Searching for disks...done
AVAILABLE DISK SELECTIONS:
0. c2t5000CCA00A4B33D4d0 <SUN300G cyl 46873 alt 2 hd 20 sec 625>
/scsi_vhci/d...@g5000cca00a4b33d4
1. c2t5000CCA00A4B1460d0 <SUN300G cyl 46873 alt 2 hd 20 sec 625>
/scsi_vhci/d...@g5000cca00a4b1460
Specify disk (enter its number): 0
selecting c2t5000CCA00A4B33D4d0
[disk formatted]
format> inq
Vendor: HITACHI
Product: H103030SCSUN300G
Revision: A2A8
_______________________________________________
caiman-discuss mailing list
[email protected]
http://mail.opensolaris.org/mailman/listinfo/caiman-discuss
