Ethan, I think that's an improvement. I think we could also put some
effort into minimizing the whitespace in the criteria column to improve
readability. Might also consider whether Status could be compressed to
just D, I, <blank> (there aren't any other states at this point, right?).
Dave
On 11/29/11 15:56, Ethan Quach wrote:
Tomas, Dave,
One suggestion is to merge the Service and Manifest name columns into
one by outputting the service name in it's own line, and using a static
3-space indentation for each manifest entry that belongs to that service
beneath it. This removes the length of the Service name from
contributing to the overall width. Your new (e) example would look like:
root@S11:~# installadm list -m
Service/Manifest Name Status Criteria
--------------------- ------ --------
default-i386
orig_default Default (Ignored: ipv4 = 129.168.1.2)
(Ignored: mem = 2048 MB -
unbounded)
default-sparc
orig_default Default None
new_inactive_manifest Inactive None
solaris11-i386
orig_default arch = i86pc
mac = AA:BB:CC:DD:EE:FF
ipv4 = 10.0.2.100 -
10.0.2.199
cpu = i386
mem = 1024 MB
network = 10000000000
platform = i86pc
zonename = some-zone-name-1
some-new_manifest-1 arch = sparc
mac = AA:BB:CC:DD:EE:EE
mem = 1024 MB
some-new_manifest-2bbbbbbb Default None
solaris11-sparc orig_default Default None
We used this approach for "beadm list [-d] [-s]".
-ethan
On 11/29/11 01:15, Tomas Dzik wrote:
Hi Dave,
thanks a lot for your comment. So taking into account that criteria
themselves could be quite long (only mac=AA:BB:CC:DD:EE:EE without
spaces around '=' occupy 21 characters) do you (or anyone else on this
mailing list) have some suggestion how the output should look like ?
Best regards,
Tomas D.
Dne 28.11.11 16:41, Dave Miner napsal(a):
Tomas, thanks for taking this on, it's an important improvement. But,
can we work out an output format that will keep the width at 80 columns
more often than not? The examples seem to be wider than that in general,
and I'd expect complaints about readability as shown.
Dave
On 11/24/11 09:36, Tomas Dzik wrote:
Hi all,
I would like to ask you for a code-review for:
7036455 "installadm list -m" should show criteria
Webrev:
https://cr.opensolaris.org/action/browse/caiman/t.dzik/7036455
How it works:
a) It prints for "installadm list -m" similar output like for
"installadm list -m -n svcname"
b) For each service it prints active manifests + their associated
criteria
fist, followed by default manifest (+ plus it's associated criteria
marked as Ignored),
followed by inactive manifests. In each of that categories order of
manifest is not
explicitly set
c) For each manifest criteria are printed in given order. Order is
exactly the same like
if you run "installadm list -m -n svcname"
d) For examples of output, please look at "Testing" paragraph.
Testing:
1) I run all unit tests using ./slim_test -c tests.nose and there were
no regressions
2) I run pep8 on file which I modified and there were no issues
3) I created 2 x86 virtual machines and I installed my built workspace
on one of them
and let the second-one for reference. Then I created several services
with different manifests
using different criteria. Here are the original outputs of installadm
list compared to outputs
after my fix:
a) Original:
root@S11:~# installadm list -m
Service Name Manifest Status
------------ -------- ------
default-i386 orig_default Default
default-sparc orig_default Default
solaris11-i386 orig_default Default
solaris11-sparc orig_default Default
a) New:
root@S11:~# installadm list -m
Service Name Manifest Status Criteria
------------ -------- ------ --------
default-i386 orig_default Default None
default-sparc orig_default Default None
solaris11-i386 orig_default Default None
solaris11-sparc orig_default Default None
b) Original:
root@S11:~# installadm list -m -n default-i386
Manifest Status Criteria
-------- ------ --------
orig_default Default None
b) New:
root@S11:~# installadm list -m -n default-i386
Manifest Status Criteria
-------- ------ --------
orig_default Default None
c) Original:
root@S11:~# installadm list -m
Service Name Manifest Status
------------ -------- ------
default-i386 orig_default Default
default-sparc orig_default Default
solaris11-i386 orig_default Default
solaris11-sparc orig_default Default
c) New:
root@S11:~# installadm list -m
Service Name Manifest Status Criteria
------------ -------- ------ --------
default-i386 orig_default Default (Ignored: ipv4 = 192.168.1.2)
(Ignored: mem = 2048 MB
- unbounded)
default-sparc orig_default Default None
solaris11-i386 orig_default Default None
solaris11-sparc orig_default Default None
d) Original:
root@S11:~# installadm list -m
Service Name Manifest Status
------------ -------- ------
default-i386 orig_default Default
default-sparc orig_default Default
solaris11-i386 some-new_manifest-2bbbbbbb Default
solaris11-sparc orig_default Default
d) New:
root@S11:~# installadm list -m
Service Name Manifest Status Criteria
------------ -------- ------ --------
default-i386 orig_default Default (Ignored: ipv4
= 129.168.1.2)
(Ignored: mem
= 2048 MB - unbounded)
default-sparc orig_default Default None
solaris11-i386 some-new_manifest-2bbbbbbb Default None
orig_default Inactive None
some-new_manifest-1 Inactive None
solaris11-sparc orig_default Default None
e) Original:
oot@S11:~# installadm list -m
Service Name Manifest Status
------------ -------- ------
default-i386 orig_default Default
default-sparc orig_default Default
solaris11-i386 orig_default
some-new_manifest-1
some-new_manifest-2bbbbbbb Default
solaris11-sparc orig_default Default
e) New:
root@S11:~# installadm list -m
Service Name Manifest Status Criteria
------------ -------- ------ --------
default-i386 orig_default Default (Ignored: ipv4
= 129.168.1.2)
(Ignored: mem
= 2048 MB - unbounded)
default-sparc orig_default Default None
new_inactive_manifest Inactive None
solaris11-i386 orig_default arch = i86pc
mac =
AA:BB:CC:DD:EE:FF
ipv4 =
10.0.2.100 - 10.0.2.199
cpu = i386
mem = 1024 MB
network =
10000000000
platform = i86pc
zonename =
some-zone-name-1
some-new_manifest-1 arch = sparc
mac =
AA:BB:CC:DD:EE:EE
mem = 1024 MB
some-new_manifest-2bbbbbbb Default None
solaris11-sparc orig_default Default None
4) Because I modified function which is also used for printing profiles
I checked
that listing of profiles didn't change
Regards,
Tomas D.
_______________________________________________
caiman-discuss mailing list
[email protected]
http://mail.opensolaris.org/mailman/listinfo/caiman-discuss
_______________________________________________
caiman-discuss mailing list
[email protected]
http://mail.opensolaris.org/mailman/listinfo/caiman-discuss
_______________________________________________
caiman-discuss mailing list
[email protected]
http://mail.opensolaris.org/mailman/listinfo/caiman-discuss
_______________________________________________
caiman-discuss mailing list
[email protected]
http://mail.opensolaris.org/mailman/listinfo/caiman-discuss
