Could you set the ingress shaper to 50% of you true ingress rate and try again,
please?
Also could you post the results of 'tc -d qdisc' with your current settings and
with the 50% settings (I will probably ask for more data...)? And finally I
believe you are on an ADSL link, what are the sync rates reported by the modem,
and which ISP are you with (I ask, as some ISPs actually employ a shaper at
their BRAS, so the modem sync rate might not be the actual bottleneck
bandwidth). That said, with wrong shaper settings I would rather expect
increased latency under load, but not bandwidth violations.
Best Regards
Sebastian
On October 27, 2016 2:16:06 AM GMT+02:00, "G. Amanakis" <[email protected]>
wrote:
>I mean that the ingress limit on WAN (or egress limit on LAN) seems to
>be ignored, and the rate bmon and bwm-ng report is the maximum
>achievable. I.e. on 450kbyte/s ingress with the limit set at
>400kbyte/s, when bittorrent is in use bmon reports 450kbyte/s after
>10-20 seconds.
>
>------------------------------------------------------------------------
>
>_______________________________________________
>Cake mailing list
>[email protected]
>https://lists.bufferbloat.net/listinfo/cake
_______________________________________________
Cake mailing list
[email protected]
https://lists.bufferbloat.net/listinfo/cake
