* >1. What's the status of make >wifi fast on the ath10k now, or >did it *>* make it there yet? * >Well, the queue rework is in >there, but only enabled for >certain >hardware. Not for the Archer, >though...
Bummer... Is there a handy list of which devices are MWFF functional on ath9k and ath10k? On Apr 20, 2017 2:13 PM, "Jon Pike" <[email protected]> wrote: > >The 17.01 LEDE release is great for >both the C7 and the WNDR3800, and > > has all the WiFi-related fixes (bufferbloat fixes and airtime fairness) > included. You'll probably need something beefier for a main gateway at > those speeds, though. Not sure about the APU2; think it is supported in > >LEDE as well? > > Just a note, I have a C7, and it might just be able to get by at your speeds. > Actually, have a 300/30mbit cable connection, so I've done a lot of > experimenting to see how much of that it can handle. The limit seems to be > about 120-140 (set) with measured speed being 100-125mbit, with Cake running, > before my C7 starts hitting 0% idle. Now, only ingress is that fast, with > the egress much slower, not sure if it would he worse case with both about > as fast. No SQM, or SQM on the 30mbit egress only, and it's good to >340mbit. > > Thought this might be a good place to ask a question or two abt the wifi fast > stuff... while Toke's listening. > > 1. What's the status of make wifi fast on the ath10k now, or did it make it > there yet? > > 2. Is there any benefit or reason to use (or not) the optional Caldera ath10k > driver vs the standard one? (Possibly no MWFF connection) > > TNX... > >
_______________________________________________ Cake mailing list [email protected] https://lists.bufferbloat.net/listinfo/cake
