Kinda surprising that the plain ER-X isn't readily available. I know Dustin used to have them, but they're out of stock. Both of them will do just fine, but I'd probably pick the ER-X-SFP for the beefier CPU, if only to get some extra headroom. Mind the ER-X only have 256 MB RAM and 256 MB flash, if that matters to you.
DSL tends to suck pretty (read: very) bad without proper shaping, I know. On that note, are you planning to run an AQM on both ends of the bottleneck, or shape ingress traffic via a IFB device? CAKE helps a lot when running on ingress, but it can't come close to running on both ends. Best Regards Nils On Tue, May 2, 2017, at 12:34, [email protected] wrote: > I'm actually most interested in how this works on low bandwidth accesses. > Typicaly, what can we as an ISP do to make ADSL and VDSL less sucky for > our customers. So an Edge Router PoE-5 1) or the X sfp 2) would be a > good platform for this? (Don't need the PoE or sfp, but it's the easiest > accessible version here in Norway). > > Nils, very good of you to keep such packages precompiled! That will save > me a lot of time. > > > 1) > https://www.komplett.no/product/867933/datautstyr/nettverk/routere/ubiquiti-edgerouter-5-port-poe > 2) > https://www.komplett.no/product/898813/datautstyr/nettverk/routere/ubiquiti-edgerouter-x-sfp# > > -Erik > > ________________________________________ > Fra: Lochnair <[email protected]> > Sendt: 28. april 2017 18:39 > Til: Taraldsen Erik > Kopi: [email protected] > Emne: Re: [Cake] Recomended HW to run cake and fq_codel? > > Hi Erik > > I can't speak for what's "recommended" hardware for running CAKE on, but > from experience I can say that CAKE runs quite well on the EdgeRouters. > The EdgeRouter platform does not have CAKE support built-in, so I > maintain pre-compiled binaries here: > https://community.ubnt.com/topic/239619/cake-and-fq-pie-compiled-for-the-edgerouter-devices/1 > > In terms of expected performance, I've seen tests on the ER-Lite come > out at about ~80Mb/20Mb on a 200Mb/20Mb link. I've not been able to do > any "perf" runs on it myself, as my only one is in production. I don't > have an ER-X, but one of the guys on the UBNT forum claimed to get > ~120-140 Mbit symmetric on the ER-X model. > > Best Regards > Nils > _______________________________________________ Cake mailing list [email protected] https://lists.bufferbloat.net/listinfo/cake
