--- Begin Message ---
I am currently testing the cobalt branch with limited rates. The line is
a residential cable connection (Comcast) advertised as 10Mbps (actual
speeds are ~12500kbps ingress and ~2600kbps egress). IMO the limited
rate is more stable after the last commits. I used the apu2.sh and
dancer.sh scripts (from Dave, http://blog.cerowrt.org/flent/fq_host2/)
on two different machines simultaneously. BTW, I think dancer.sh has a
"bug", the last 2 tests should begin with "flent -6" since we want to
test IPv6.
Config:
qdisc cake 8002: dev ens3 root refcnt 9 bandwidth 2500Kbit diffserv3
dual-srchost nat wash rtt 100.0ms noatm overhead 18 via-ethernet mpu 64
qdisc cake 8001: dev ens4 root refcnt 9 bandwidth 12200Kbit diffserv3
dual-dsthost wash ingress rtt 100.0ms noatm overhead 18 via-ethernet mpu 64
Due to the long nature of the results, they are to be found at
https://pastebin.com/zRvUeCDd.
The only comment I have is that while ingress bandwidth is distributed
consistently equally between the two hosts (eg 5.81Mbits/s for each one
in IPv4), egress bandwidth could have been distributed better (eg
1.06Mbits/s for apu2 vs 1.44Mbit/s for dancer).
George
.
--- End Message ---
_______________________________________________
Cake mailing list
[email protected]
https://lists.bufferbloat.net/listinfo/cake
