Hello!
I'm testing and using Callweaver I'm using the latest spandsp and latest svn from Saturday or the version from today rc4 The configuration is as follows: I'm using a Patton with SIP-Trunk for the E1-Gateway! A SIP-Trunk is to a Asterisk 1.4.5 for the calling! Now every incoming call went through Patton -> Callweaver-> Asterisk Just a Fax is directly connected to the Callweaver with T38 Incoming Fax are stored with RXFax and sent with TXFax Outgoing Fax are send directly. Normally it works fine, but about 2 to 5 times a day the callweaver is hanging. In the log File the last message is always: Jun 25 09:00:39 WARNING[3053075376] pbx.c: Timeout, but no rule 't' in context 'ankommend_etel' Jun 25 09:01:01 NOTICE[3053341616] pbx_spool.c: Call completed to LOCAL/[EMAIL PROTECTED] Jun 25 09:01:13 WARNING[3053341616] pbx.c: Timeout, but no rule 't' in context 'ankommend_etel' Jun 25 09:02:09 NOTICE[3054406576] pbx_spool.c: Call completed to LOCAL/[EMAIL PROTECTED] Jun 25 09:05:44 WARNING[3053874096] pbx.c: Timeout, but no rule 't' in context 'ankommend_etel' Jun 25 09:11:54 WARNING[3052542896] pbx.c: Timeout, but no rule 't' in context 'ankommend_etel' Jun 25 09:17:54 WARNING[3053075376] pbx.c: Timeout, but no rule 't' in context 'ankommend_etel' Jun 25 09:18:35 WARNING[3053075376] pbx.c: Timeout, but no rule 't' in context 'ankommend_etel' Jun 25 09:18:58 WARNING[3053075376] pbx.c: Timeout, but no rule 't' in context 'ankommend_etel' Jun 25 09:20:54 NOTICE[3060050864] sched.c: Attempted to delete nonexistent schedule entry 2623! In this case sometimes it works with restart, sometimes I've the kill process and restart callweaver. Just one more information: Every time when I start callweaver there is following message in the log file: Jun 25 09:25:01 WARNING[3060485040] timer.c: Requested a timer with 1000000 nanosecond interval, but system timer reports a resolution of 4000250 nanosec. Timing may be unreliable! Since rc4 there are 2 lines: Jun 25 09:24:02 WARNING[3055463344] timer.c: Requested a timer with 3000000 nanosecond interval, but system timer reports a resolution of 4000250 nanosec. Timing may be unreliable! Jun 25 09:25:01 WARNING[3060485040] timer.c: Requested a timer with 1000000 nanosecond interval, but system timer reports a resolution of 4000250 nanosec. Timing may be unreliable! I'm using debian etch 4.01, I tried several configuration options: ./configure --enable-mysql=yes --with-cdr_mysql=yes --with-chan_iax2=no --with-chan_woomera=no --with-chan_sccp=no --with-app_sql_postgres=no If callweaver would work fine, I want the switch from Asterisk to callweaver!!! Regards from Austria, Minniberger Dietmar e-mail: [EMAIL PROTECTED] Tel: +43 (7683) 5009 Fax: +43 (7683) 5009 4
_______________________________________________ Callweaver-dev mailing list [email protected] http://lists.callweaver.org/mailman/listinfo/callweaver-dev
