thomas schorpp wrote: > thomas schorpp wrote: >> thomas schorpp wrote: >>> callweaver: page allocation failure. order:0, mode:0x20 >>> Pid: 4676, comm: callweaver Tainted: P 2.6.24-1-686 #1 >>> [<c015f436>] __alloc_pages+0x2c4/0x2d5 >>> [<c01757ad>] cache_alloc_refill+0x27c/0x477 >>> [<c0175a1d>] __kmalloc+0x75/0xb2 >>> [<c0259e2b>] __alloc_skb+0x49/0xf7 >>> [<ccb016c1>] setup_rx_descbuffer+0x28/0xd7 [b43] >>> [<c01099ca>] sched_clock+0x8/0x18 >>> [<ccb022dc>] b43_dma_rx+0x140/0x1ef [b43] >>> [<c0109909>] pit_next_event+0x2e/0x33 >>> [<ccaf4e37>] b43_interrupt_tasklet+0x42a/0x57d [b43] >>> [<c013cd70>] tick_program_event+0x33/0x52 >>> [<c013849e>] hrtimer_interrupt+0x198/0x1c2 >>> [<c01293e3>] tasklet_action+0x58/0xb8 >>> [<c0128f7b>] __do_softirq+0x66/0xd3 >>> [<c012902d>] do_softirq+0x45/0x53 >>> [<c0129291>] irq_exit+0x38/0x6b >>> [<c01066f2>] do_IRQ+0x5a/0x70 >>> [<c0128b07>] sys_gettimeofday+0x27/0x53 >>> [<c01048c3>] common_interrupt+0x23/0x28 >>> [<c02b0000>] unix_mkname+0x4d/0x6f >>> ======================= >>> Mem-info: >>> DMA per-cpu: >>> CPU 0: Hot: hi: 0, btch: 1 usd: 0 Cold: hi: 0, btch: >>> 1 usd: 0 >>> Normal per-cpu: >>> CPU 0: Hot: hi: 42, btch: 7 usd: 35 Cold: hi: 14, btch: >>> 3 usd: 12 >>> Active:19989 inactive:16981 dirty:105 writeback:0 unstable:0 >>> free:337 slab:8648 mapped:5486 pagetables:225 bounce:0 >>> DMA free:744kB min:144kB low:180kB high:216kB active:1436kB >>> inactive:6688kB present:16256kB pages_scanned:0 all_unreclaimable? no >>> lowmem_reserve[]: 0 174 174 174 >>> Normal free:604kB min:1616kB low:2020kB high:2424kB active:78520kB >>> inactive:61236kB present:178692kB pages_scanned:0 all_unreclaimable? no >>> lowmem_reserve[]: 0 0 0 0 >>> DMA: 0*4kB 1*8kB 0*16kB 1*32kB 1*64kB 1*128kB 0*256kB 1*512kB >>> 0*1024kB 0*2048kB 0*4096kB = 744kB >>> Normal: 6*4kB 1*8kB 1*16kB 1*32kB 0*64kB 0*128kB 0*256kB 1*512kB >>> 0*1024kB 0*2048kB 0*4096kB = 592kB >>> Swap cache: add 0, delete 0, find 0/0, race 0+0 >>> Free swap = 249944kB >>> Total swap = 249944kB >>> Free swap: 249944kB >>> 49120 pages of RAM >>> 0 pages of HIGHMEM >>> 1266 reserved pages >>> 18042 pages shared >>> 0 pages swap cached build on external debian lenny/sid PIII >>> 1GHz host for >= PII 266 etch target host >>> >>> changes made since last OK state: >>> >>> 1. CW svn up >>> 2. upgraded to spandsp .18 >>> 3. dist upgrade on the build host: >>> > >>> >>> suspect gcc binary incompatibility. >>> now trying to reproduce with target machine devenv build... >>> >>> y >>> tom >>> >> >> >> XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX >> >> >> no platform/gcc issue. reproducible with target host compiled build, too. >> this comes from the upgrade to spandsp .18 and the last few 1.2 RC svn >> changes, can You guys tell me what You're doing to disrupt 2.6.24 >> networking? >> forwarding to kernel bugzilla: >> > > notourbug. b43 stalls system if wireless connection problems, old > bcm4306 card dies here: > > b43-phy0 ERROR: Firmware file "b43/ucode5.fw" not found or load failed. > but it is there and fs is ok. > > wlan0: disassociate(reason=3) > wlan0: Initial auth_alg=0 > wlan0: authenticate with AP 00:16:38:cb:60:61 > wlan0: Initial auth_alg=0 > wlan0: authenticate with AP 00:16:38:cb:60:61 > wlan0: Initial auth_alg=0 > wlan0: authenticate with AP 00:16:38:cb:60:61 > wlan0: RX authentication from 00:16:38:cb:60:61 (alg=0 transaction=2 > status=0) > wlan0: authenticated > wlan0: associate with AP 00:16:38:cb:60:61 > wlan0: authentication frame received from 00:16:38:cb:60:61, but not in > authenticate state - ignored > wlan0: authentication frame received from 00:16:38:cb:60:61, but not in > authenticate state - ignored > wlan0: RX ReassocResp from 00:16:38:cb:60:61 (capab=0x11 status=0 aid=1) > wlan0: associated > wlan0: disassociate(reason=3) > wlan0: Initial auth_alg=0 > wlan0: authenticate with AP 00:16:38:cb:60:61 > wlan0: RX authentication from 00:16:38:cb:60:61 (alg=0 transaction=2 > status=0) > wlan0: authenticated > wlan0: associate with AP 00:16:38:cb:60:61 > wlan0: RX ReassocResp from 00:16:38:cb:60:61 (capab=0x11 status=0 aid=1) > wlan0: associated > wlan0: deauthenticate(reason=3) > >
bug reopened, bcm4306 card ok again after cold boot, device not involved, callweaver still stalls system on starttup even if wlan0 not there/forced down, now filing kernel bugzilla. tom3:~# ping sip.tc300.net PING sip.tc300.net (192.168.100.1) 56(84) bytes of data. 64 bytes from sip.tc300.net (192.168.100.1): icmp_seq=1 ttl=64 time=1.87 ms 64 bytes from sip.tc300.net (192.168.100.1): icmp_seq=2 ttl=64 time=6.36 ms 64 bytes from sip.tc300.net (192.168.100.1): icmp_seq=3 ttl=64 time=1.31 ms 64 bytes from sip.tc300.net (192.168.100.1): icmp_seq=4 ttl=64 time=8.02 ms 64 bytes from sip.tc300.net (192.168.100.1): icmp_seq=5 ttl=64 time=1.24 ms 64 bytes from sip.tc300.net (192.168.100.1): icmp_seq=6 ttl=64 time=9.20 ms 64 bytes from sip.tc300.net (192.168.100.1): icmp_seq=7 ttl=64 time=1.20 ms 64 bytes from sip.tc300.net (192.168.100.1): icmp_seq=8 ttl=64 time=7.13 ms --- sip.tc300.net ping statistics --- 8 packets transmitted, 8 received, 0% packet loss, time 7002ms rtt min/avg/max/mdev = 1.207/4.545/9.202/3.227 ms Registered led device: b43-phy0:tx Registered led device: b43-phy0:rx Registered led device: b43-phy0:radio wlan0: Initial auth_alg=0 wlan0: authenticate with AP 00:16:38:cb:60:61 wlan0: RX authentication from 00:16:38:cb:60:61 (alg=0 transaction=2 status=0) wlan0: authenticated wlan0: associate with AP 00:16:38:cb:60:61 wlan0: RX AssocResp from 00:16:38:cb:60:61 (capab=0x11 status=0 aid=1) wlan0: associated _______________________________________________ Callweaver-dev mailing list Callweaver-dev@callweaver.org http://lists.callweaver.org/mailman/listinfo/callweaver-dev
