Hi Alejandro,
I think you have more than one problem there. One appears to be the
inconsistent use of upper and lower case for UniCall in chan_unicall.c.
That used to not matter. Now it does. Hopefully I have just fixed that
in SVN, so its always UniCall. Can you try again, please.
Steve
Alejandro Rios wrote:
> Hi Steve,
>
> Steve Underwood <[EMAIL PROTECTED]> escribió:
>
>
>
>> Can you try experimenting with the card from one of these other machines
>> at night?
>>
>> Regards,
>> Steve
>>
>>
>
> After testing, the r1t1 card/module doesn't like MFC/R2. The problem is
> reported to rhino.
>
> So, I tried the Digium card that is currtently working with asterisk and
> MFC/R2 in the Ceros machine running Callweaver. Zttool shows both tx and rx
> bits unblocked after chan_unicall is loaded, but, the karma didn't stop
> there:
>
> When I tried to make a call, I got this:
>
> -- Unicall/21 far unblocked
> 070508-141430 WARNING[3054533552]: chan_unicall.c:2693 handle_uc_event:
> Unicall/21 event Local end unblocked
> -- Unicall/21 local unblocked
> 070508-141430 WARNING[3069500336]: timer.c:112 _set_interval: Requested a
> timer with 3000000 nanosecond interval, but system timer reports a
> resolution of 4000250 nanosec. Timing may be unreliable!
>
> *CLI> 070508-141432 WARNING[3053968304]: timer.c:112 _set_interval:
> Requested a timer with 2000000 nanosecond interval, but system timer reports
> a resolution of 4000250 nanosec. Timing may be unreliable!
>
> ...
> -- Executing Set("SIP/phone1-60a6", "CDR(pbx)=pbx1") in new stack
> -- Executing Set("SIP/phone1-60a6", "CDR(userfield)=phone1") in new
> stack
> -- Executing Set("SIP/phone1-60a6", "CDR(dialout)=local") in new stack
> -- Executing Proc("SIP/phone1-60a6", "local|6777082|n|0") in new stack
> -- Executing GotoIf("SIP/phone1-60a6", "1?3:2") in new stack
> -- Goto (proc-local,s,3)
> -- Executing GotoIf("SIP/phone1-60a6", "1?4:7") in new stack
> -- Goto (proc-local,s,4)
> -- Executing Set("SIP/phone1-60a6", "timeout=0") in new stack
> -- Executing Set("SIP/phone1-60a6", "options=Tt") in new stack
> -- Executing Goto("SIP/phone1-60a6", "9") in new stack
> -- Goto (proc-local,s,9)
> -- Executing Set("SIP/phone1-60a6", "TIMEOUT(absolute)=0") in new stack
> -- Channel hangup cancelled.
> -- Executing Set("SIP/phone1-60a6", "CDR(outtrunk)=troncal_e1_etb1") in
> new stack
> -- Executing Set("SIP/phone1-60a6", "CDR(accountcode)=0") in new stack
> -- Executing Dial("SIP/phone1-60a6", "Unicall/g1/6777082|25|gTt") in new
> stack
> 070508-141436 NOTICE[3053165488]: app_dial.c:1133 dial_exec_full: Unable to
> create channel of type 'Unicall' (cause 0 - Unknown)
> == Everyone is busy/congested at this time (1:0/0/1)
> -- Executing Set("SIP/phone1-60a6", "TIMEOUT(absolute)=0") in new stack
> -- Channel hangup cancelled.
> -- Executing Set("SIP/phone1-60a6", "CDR(outtrunk)=troncal_e1_etb2") in
> new stack
> -- Executing Set("SIP/phone1-60a6", "CDR(accountcode)=0") in new stack
> -- Executing Dial("SIP/phone1-60a6", "Unicall/g2/6777082|25|gTt") in new
> stack
> 070508-141436 NOTICE[3053165488]: app_dial.c:1133 dial_exec_full: Unable to
> create channel of type 'Unicall' (cause 0 - Unknown)
> == Everyone is busy/congested at this time (1:0/0/1)
> -- Executing Congestion("SIP/phone1-60a6", "5") in new stack
> == Spawn extension (proc-local, s, 17) exited non-zero on
> 'SIP/phone1-60a6' in proc 'local'
> == Spawn extension (out-phone1, 6777082, 4) exited non-zero on
> 'SIP/phone1-60a6'
> 070508-141444 WARNING[3053968304]: timer.c:112 _set_interval: Requested a
> timer with 1000000 nanosecond interval, but system timer reports a
> resolution of 4000250 nanosec. Timing may be unreliable!
>
> And, when a call was incoming from the PSTN, I got this error:
>
>
> 070508-141452 WARNING[3054533552]: chan_unicall.c:2693 handle_uc_event:
> Unicall/9 event Detected
> 070508-141454 WARNING[3054533552]: chan_unicall.c:2693 handle_uc_event:
> Unicall/9 event Protocol failure
> -- Unicall/9 protocol error. Cause 32772
>
>
> Using the Digium card, it seems a software problem now.
>
> Remember that I'm using the following versions:
>
> callweaver-1.1.99.20070430.tar.gz snapshot,
> libmfcr2-20070325.tar.gz
> libunicall-20070325.tar.gz
> libsupertone-20060205.tar.gz
> and,
> spandsp-20070502.tar.gz
>
> What other debug info could be useful to solve this?
>
> Thanks and best regards,
>
> Alejandro Ríos
> Avatar Ltda.
>
_______________________________________________
Callweaver-users mailing list
[email protected]
http://lists.callweaver.org/mailman/listinfo/callweaver-users
