I have the following situation fax-ata -----------------sip-------------------openpbx------sipT38------------openpbx---------------sip--------ata-fax
So I want to send fax from one site to the other by using t38 in between openpbx machines. If I understood this correctly openpbx 1 and 2 shoud be t.38 gateways then. sip.conf [6000] ;this is a link between openpbx's and is almost the same on both sides type=friend username=6000 secret=6000 host=192.168.0.5 nat=never disallow=all allow=alaw dtmfmode=info qualify=yes context=fax-in canreinvite=yes extensions.conf 1st pbx (sender ata is here SIP/300) [fax-out] exten => _X.,1,SipT38SwitchOver() exten => _X.,2,T38Gateway(SIP/6000/100) exten => _X.,3,Dial(SIP/6000/100) extensions.conf 2nd pbx (reciever ata is here SIP/100) [fax-in] exten => _X.,1,FaxDetect(4000) exten => fax,1,T38Gateway(SIP/100) In my packet sniffer I see call being established, but the reciever keeps sending: t38:t30 Ind:no-signal t38:t30 Ind:v21-preamble t38:v21:HDLC:Called Subscriber Identification to the sender pbx, and that rotates those messages, no answer from sender though. In the reciever log I see: May 21 15:38:33 WARNING[3055397808]: app_t38gateway.c:181 t38_tx_packet_handler: t38_tx_packet_handler: Sending 1 copies of frame repeating all the time. Any ideas? _______________________________________________ Callweaver-users mailing list [email protected] http://lists.callweaver.org/mailman/listinfo/callweaver-users
