Hi! Steve gave me the advice to use the T38_DISABLE option.
Do I understand it correctly, that I use the option inside the extension.conf like so: exten => +4925729169xxx,1,Set(T38_DISABLE=1) exten => +4925729169xxx,2,Dial(SIP/26) Unfortunatly, that is not working :( Matthias Am 27.06.2007 um 16:17 schrieb Steve Underwood: > Hi Matthias, > > The far end is trying to make a T.38 call, and Callweaver > negotiates and accepts that. Something isn't right though. The > UDPTL packets being sent still seem to be the wrong kind. > > This looks like a situation where you really should be using the > new option to disable T.38 operation, if the other end is broken in > some way. When CtRiX gets back from his holiday we will check out > the redundancy negotiation again. > > Steve > > > Matthias Gelbhardt wrote: >> Hi Steve, >> >> I had made that change earlier, but the result is the same. I have >> attached another dump. >> >> You said, there is something broken. Is it the fact, that the two >> ends are negotiating to use T.38, as I am calling a phone and no fax? >> >> Greetings, >> >> Matthias > > _______________________________________________ Callweaver-users mailing list [email protected] http://lists.callweaver.org/mailman/listinfo/callweaver-users
