eventually the ivr will go to cw, i just can't right now. i've tried
with option 2, but without any luck. i know its a firmware problem,
and until i can get a hold of one that works (it did once upon a time)
i was looking for a workaround.
is there anyone working with chan_mgcp? right now i'm using it patched
to work with ncs, just making tests and fooling around in the cable
company i work. anybody interested to share thoughts? kind regards.
thanks.

Zeta


On 7/23/07, Patrick McEvoy <[EMAIL PROTECTED]> wrote:
> I'd think it would be better to get the IVR to work properly with cw.
> Downgrade firmware an option?
>
> Option 2, tried using 'canreinvite=no' and inband dtmf?
>
> Bare in mind I'm no expert...
>
> P
>
> On 24/07/07, Marcos Zapata <[EMAIL PROTECTED]> wrote:
> > Hi, I've been using chan_mgcp with canreinvite=yes, because connected
> > to one equipment i have an ivr, also everything is very experimental.
> > if i didn't, whenever i had to make a selection (press any key) the
> > communication closed. Now, after a firmware upgrade, the equipments
> > stop working when attempting native bridge, there's no audio comming
> > in. if i set canreinvite=no, they can talk perfectly with each other
> > again but can't use the ivr.
> > i know cw works ok, but is there a way to prevent native bridging and
> > still be able to send keystrokes to each other through cw? i would
> > need to place cw in between everything: receive dtmf from one and
> > resend it to another, along with control and rtp. is it possible?
> >
> > Zeta
> > _______________________________________________
> > Callweaver-users mailing list
> > [email protected]
> > http://lists.callweaver.org/mailman/listinfo/callweaver-users
> >
> _______________________________________________
> Callweaver-users mailing list
> [email protected]
> http://lists.callweaver.org/mailman/listinfo/callweaver-users
>
_______________________________________________
Callweaver-users mailing list
[email protected]
http://lists.callweaver.org/mailman/listinfo/callweaver-users

Reply via email to