I have no idea… I am actually using Cisco AS5300 as gateways….
Callweaver to callweaver works 90% of the time OK I have also tested Linksys SPA 2102, seems to work fine Now testing the Grandstream ATA ACT-Tel 4FXS ATA not so good… Wish I could be of more help. Maybe there is a list somewhere (Steve, any suggestions ?) Warmest Regards, Walter Klomp DISCLAIMER: This e-mail and any attachment is intended only for the exclusive and confidential use of the addressee(s). If you are not the intended recipient, any use, interference with, disclosure or copying of this material is unauthorised and prohibited. If you have received this message in error, please notify the sender by return e-mail immediately and delete the message from your computer without making any copies. From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of yao marius hemann kanga Sent: Thursday, May 01, 2008 12:38 AM To: Users Mailing List - Non-Commercial Discussion Subject: [Callweaver-users] Re : Re : Re : PHASEESTATUS value and significations Thanks you for your help. I am using ATA-172 could you advise me another T.38 gateway which work fine with callweaver? Cordialement , Hermann KANGA ----- Message d'origine ---- De : Walter Klomp <[EMAIL PROTECTED]> À : Users Mailing List - Non-Commercial Discussion <callweaver-users@callweaver.org> Envoyé le : Mercredi, 30 Avril 2008, 15h01mn 40s Objet : Re: [Callweaver-users] Re : Re : PHASEESTATUS value and significations Your Gateway probably crashed on the T.38 negotiations…. I had the same with one of my providers’ Cisco gateways…. My own ones work fine though… There is no solution to this AFAIK other than using a different T38 gateway (or software upgrade the existing one) Warmest Regards, Walter Klomp DISCLAIMER: This e-mail and any attachment is intended only for the exclusive and confidential use of the addressee(s). If you are not the intended recipient, any use, interference with, disclosure or copying of this material is unauthorised and prohibited. If you have received this message in error, please notify the sender by return e-mail immediately and delete the message from your computer without making any copies. From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of yao marius hemann kanga Sent: Wednesday, April 30, 2008 9:58 PM To: Users Mailing List - Non-Commercial Discussion Subject: [Callweaver-users] Re : Re : PHASEESTATUS value and significations someone have some idea ??? As i say i received fax on my fax machine but empty file. At the same time on my callweaver box i see this message : Apr 30 13:38:22 WARNING[3060898736]: app_txfax.c:229 t38_tx_packet_handler: Unable to write frame to channel; Resource temporarily unavailable -- Executing NoOp("SIP/12345672-237d", TX: REMOTESTATIONID is 12345672) -- Executing NoOp("SIP/12345672-237d", TX: PHASEESTATUS is 51) -- Executing NoOp("SIP/12345672-237d", TX: PHASEESTATUS is The call dropped prematurely) Apr 30 13:38:22 NOTICE[3060898736]: pbx_spool.c:279 attempt_thread: Call completed to SIP/12345672 thank you for help Cordialement , Hermann KANGA ----- Message d'origine ---- De : yao marius hemann kanga <[EMAIL PROTECTED]> À : Users Mailing List - Non-Commercial Discussion <callweaver-users@callweaver.org> Envoyé le : Mardi, 29 Avril 2008, 13h39mn 44s Objet : Re : [Callweaver-users] PHASEESTATUS value and significations hi, After desactivated ecm in extensions.conf when usinf TxFAX, I received fax on my fax machine but the fax is empty. As on my server the fax is tif file which is not empty. I don't understand why the fax file is empty Cordialement , Hermann KANGA ----- Message d'origine ---- De : yao marius hemann kanga <[EMAIL PROTECTED]> À : callweaver forum <callweaver-users@callweaver.org> Envoyé le : Mardi, 29 Avril 2008, 12h37mn 06s Objet : [Callweaver-users] PHASEESTATUS value and significations Hi, I send fax over IP using callweaver (CallWeaver svn-1.2 SVN-) and ATA-172. At the end I received this message on my callweaver server : Apr 29 12:09:30 WARNING[3060403120]: app_txfax.c:229 t38_tx_packet_handler: Unable to write frame to channel; Resource temporarily unavailable -- Executing NoOp("SIP/12345672-f63a", TX: REMOTESTATIONID is 1234567) -- Executing NoOp("SIP/12345672-f63a", TX: PHASEESTATUS is 51) Apr 29 12:09:30 NOTICE[3060403120]: pbx_spool.c:279 attempt_thread: Call completed to SIP/12345672 At the same time on my fax machine (PANASONIC KX-FP342) behind the ATA-172 I see callweaver, after connecting ... and finally receiving P1 but I don't see the fax page on my fax machine. I would like to undersand, konw the signification of PHASEESTATUS and all this. Thanks you for your help Cordially, Hermann KANGA __________________________________________________ Do You Yahoo!? En finir avec le spam? Yahoo! Mail vous offre la meilleure protection possible contre les messages non sollicités http://mail.yahoo.fr Yahoo! Mail __________________________________________________ Do You Yahoo!? En finir avec le spam? Yahoo! Mail vous offre la meilleure protection possible contre les messages non sollicités http://mail.yahoo.fr Yahoo! Mail __________________________________________________ Do You Yahoo!? En finir avec le spam? Yahoo! Mail vous offre la meilleure protection possible contre les messages non sollicités http://mail.yahoo.fr Yahoo! Mail __________________________________________________ Do You Yahoo!? En finir avec le spam? Yahoo! Mail vous offre la meilleure protection possible contre les messages non sollicités http://mail.yahoo.fr Yahoo! Mail
_______________________________________________ Callweaver-users mailing list Callweaver-users@callweaver.org http://lists.callweaver.org/mailman/listinfo/callweaver-users
