Hi, I'm trying to get up and running a TDM400 with a standard italian pots line but i'm having problems at getting asterisk to detect when the line get answered on outgoing calls.
I'm using callweaver 1.2.0.1 with zaptel 1.4.11. I tried with and without answeronpolarityswitch=yes but it didn't change anything at all. With callprogress=yes answer get never detected. With callprogress=no line get answered as soon as it start ringing, regardless if someone really answer the call. Zaptel channels use fxs_ks signalling. Loading wctdm module with debug=1 result in: kernel: Freshmaker version: 73 kernel: Freshmaker passed register test kernel: ProSLIC on module 0, product 3, version 15 kernel: VoiceDAA System: 04 kernel: ISO-Cap is now up, line side: 03 rev 06 kernel: setting FXO tx gain for card=0 to 0 kernel: setting FXO rx gain for card=0 to 0 kernel: DEBUG fxotxgain:0.0 fxorxgain:0.0 kernel: Module 0: Installed -- AUTO FXO (FCC mode) kernel: ProSLIC on module 1, product 0, version 0 kernel: VoiceDAA System: 04 kernel: ISO-Cap is now up, line side: 03 rev 06 kernel: setting FXO tx gain for card=1 to 0 kernel: setting FXO rx gain for card=1 to 0 kernel: DEBUG fxotxgain:0.0 fxorxgain:0.0 kernel: Module 1: Installed -- AUTO FXO (FCC mode) kernel: ProSLIC on module 2, product 0, version 0 kernel: Module 2: Not installed kernel: ProSLIC on module 3, product 0, version 0 kernel: Module 3: Not installed kernel: Found a Wildcard TDM: Wildcard TDM400P REV I (2 modules) kernel: 4294908325 Polarity reversed (0 -> -1) kernel: 4294908326 Polarity reversed (0 -> 1) kernel: BATTERY on 1/1 (-)! kernel: NO BATTERY on 1/2! Any suggestion? Am i trying to do something that simply can't be done? As a notice, i'm having exactly the same problem with asterisk 1.6beta9 if this can be of any help. Thanks, Enrico Maistro _______________________________________________ Callweaver-users mailing list [email protected] http://lists.callweaver.org/mailman/listinfo/callweaver-users
