Ok, i tried to port chan_lcr, i renamed all ast to cw, and just tried it: http://callweaver.pastebin.com/m7f884f6c
So, the most erros are doable for me, but i dont know how to eliminate this strings.h:221/stdlib.h:196 erros? any hints? Kristijan Kristijan Vrban schrieb: > hi, chan_lcr for callweaver? Because then more BRI-ISDN stuff is in LCR > and is independent from CW. > > So it could be more easier to maintain BRI-ISDN in CW, then with chan_misdn. > > this was on the the misdn-list: > > dear list members, > > the mISDN socket API is almost complete and can be tested. > - it features robustness, modules can be removed without crash. > - no module parameters are required in most cases, NT-mode / TE-mode is > selected by application and can be changed at runtime. > - layer 3 stack is in user space. > > the linux-call-router is also ported to new mISDN API. > - interfaces are configured via interface.conf (NT / TE / PTP / PTMP > /...) > - Asterisk channel interface for using linux-call-router as ISDN > frontend. (replacement of chan_mISDN) > > download lates source and a little howto at: > > http://www.linux-call-router.de/download/lcr-1.0/ > > ask, if you have problem. > > best regards, > > andreas > > > _______________________________________________ Callweaver-users mailing list [email protected] http://lists.callweaver.org/mailman/listinfo/callweaver-users
