Hi Kristijan! Yes, i had the DTMF set to "AUTO" in ATA which would let it try whatever it wants i guess. I set it to just RTP and almost completely has cured the beeps. Thank you!
Since you responded, i have heard beeps just once and my partner has once got the "Transferring Call" and then dropped phone call. I am going to test turning off features in the ATA to see if that goes away too. Since the problem only happens on the analog phones and ATA (and not softphones) the problem must be there... Thanks again. I'll report back about "Transferring call" and if successful in not having that happen again. Of course waiting for something not to happen can take a while! Peace, Dan On Aug 13, 2008, at 6:10 PM, Kristijan Vrban wrote: > hello, do you have DTMF inband (in audio)? activ in your ATA? > Disable it. > Try RTP (RFC2833) only. Any differences? > > Kristijan > > Daniel Melnechuk schrieb: >> Dear CallWeaver Users, >> >> Had a Linksys PAP2T-NA ATA which started putting loud beeps into the >> incoming and outgoing sound channels. Not every call, and seemingly >> random as to when it would start and how often they would be. Then it >> started saying "Transferring call" during my phone call and would >> drop >> the call i had. Then the PAP2T died completely. >> >> While the PAP2T was getting funky before it died, i went back to >> using >> a softphone (X-Lite). Absolutely no beeps or transfers. It was then i >> suspected the PAP2T. I had also updated to the latest release of CW >> 1.2.0.1 but that did not help. >> >> After the PAP2T died, i figured it was just the PAP2T. So it was in >> warranty and i got it replaced with a SPA2102 that also does T.38 (my >> sip service provider is adding T.38). >> >> Not more than a few calls after configuring the SPA2102, it started >> to >> beep too; randomly on some calls, etc. I have not gotten the >> "transferring call" thing yet. >> >> And all during this time, calls with softphones on multiple computers >> do NOT get any beeps of this kind at all. >> >> The only configuration to the SPA2102 other then setting IP address, >> account, IP of callweaver, is that i have changed is the length and >> patterns of the distinctive rings (it has 9 of them). I set which >> ring >> pattern i want in the SIP header based on incoming calls by setting >> var ALERT_INFO before dialing an extension. >> >> Questions: >> >> 1. Has anyone experienced this problem of getting beeps with Linksys >> SPA2102 or PAP2T in use with Callweaver? >> >> 2. Does anyone have any idea why the SPA2102 could be making these >> beeps? >> >> Any thoughts appreciated. >> >> Peace, >> Dan >> >> >> _______________________________________________ >> Callweaver-users mailing list >> Callweaver-users@callweaver.org >> http://lists.callweaver.org/mailman/listinfo/callweaver-users >> >> >> > _______________________________________________ > Callweaver-users mailing list > Callweaver-users@callweaver.org > http://lists.callweaver.org/mailman/listinfo/callweaver-users > _______________________________________________ Callweaver-users mailing list Callweaver-users@callweaver.org http://lists.callweaver.org/mailman/listinfo/callweaver-users
