try to use chan_fax to connect your hylafax. As far as i know, chan_fax simulates a analog modem like iaxmodem.
Kristijan Stefano Marinelli schrieb: > Hi everybody. I've been using callweaver 1.2.0.1 for months in many > servers with excellent results. > Now I'd like to add a server using the iaxmodem channel. I > configured it and the calls get passed to iaxmodem but, after some > seconds of data transfer (the exit line is a SIP channel with T38, going > to an external provider), I get a lot of those errors: > > Sep 9 15:12:00 WARNING[4132531088]: channel.c:739 cw_queue_frame: > Dropping voice frame for IAX2/myiaxmodem-1 due to exceptionally long queue > > and, after some time, the communication is closed. This happens both if > Hylafax is sending or receiving a fax via the iax2 channel. > > So I tried to call a RxFax() number from the Hylafax server. It gives a > different message: > > Sep 9 15:14:57 NOTICE[4127480720]: chan_iax2.c:2414 iax2_read: I should > never be called! > > but, at the end, the fax gets received successfully. > > I can send/receive faxes using the TxFax() / RxFax() from callweaver and > through the external provider, so...what could it be? > > Thank you. > Stefano > _______________________________________________ > Callweaver-users mailing list > [email protected] > http://lists.callweaver.org/mailman/listinfo/callweaver-users > > > _______________________________________________ Callweaver-users mailing list [email protected] http://lists.callweaver.org/mailman/listinfo/callweaver-users
