-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Max CtRiX Sent: Thursday, November 20, 2008 6:30 AM To: Users Mailing List - Non-Commercial Discussion Subject: Re: [Callweaver-users] T.38 problems
Hristo Benev ha scritto: > t38pt_udptl = yes What is this ? Max _______________________________________________ Callweaver-users mailing list [email protected] http://lists.callweaver.org/mailman/listinfo/callweaver-users >From callweaver wiki: ----------- Basic checklist if T.38 does not work * check if your router is not messing up with the SIP headers when CallWeaver is running on 5060, check your router compatibility or put the CallWeaver onto a port different then 5060 * are you using the latest CallWeaver Trunk and the latest SpanDSP snapshot ? * is t38udptlsupport enabled in sip.conf ? ------------------ And in sip.conf ------------------------- ;----------------------------------------- T.38 FAX PASSTHROUGH SUPPORT ----------------------- ; ; This setting is available in the [general] section as well as in device configurations. ; Setting this to yes, enables T.38 fax (UDPTL) passthrough on SIP to SIP calls, provided ; both parties have T38 support enabled in their Asterisk configuration ; This has to be enabled in the general section for all devices to work. You can then ; disable it on a per device basis. ; ; T.38 faxing only works in SIP to SIP calls, with no local or agent channel being used. ; t38pt_udptl = yes ; Default false ------------------------ Is that correct or I should remove it? Note: I copied some of the configuration from my asterisk testbed... Did I messed up? Hristo _______________________________________________ Callweaver-users mailing list [email protected] http://lists.callweaver.org/mailman/listinfo/callweaver-users
