Have you tried connecting a SIP phone, placing calls, or receiving calls. Does it work?
On Thu, 2009-06-04 at 10:56 -0700, Matthew Lockwood wrote: > Yeah that's all done. It's correctly configured and netstat -an shows > it's binding to 5060 on the correct IP. > > > > On Thu, Jun 4, 2009 at 4:46 AM, Gerald Cox <[email protected]> wrote: > > > U need to configure callweaver. Configure in a fashion > similar to > asterisk. Setup the externip in sip.conf. Also, use 'netstat > -nap' to > show what ports are in use. > > > > > On Thu, 2009-06-04 at 09:30 -0700, Matthew Lockwood wrote: > > Hi, > > > > I've just installed CW. I'm using the default out of the box > config, > > but when I port scan the server to see whether port 5060 is > open I get > > nothing even though there is no firewall running, and > netstat reports > > that it is listening on this port. What's happening? I > briefly tried > > FreeSwitch under exactly the same setup, and the server > always > > responded on this port. Is there something I'm missing? > > > > Regards, > > > > Matt > > > > > > _______________________________________________ > > Callweaver-users mailing list > > [email protected] > > > http://lists.callweaver.org/mailman/listinfo/callweaver-users > > _______________________________________________ > Callweaver-users mailing list > [email protected] > http://lists.callweaver.org/mailman/listinfo/callweaver-users > > > _______________________________________________ > Callweaver-users mailing list > [email protected] > http://lists.callweaver.org/mailman/listinfo/callweaver-users _______________________________________________ Callweaver-users mailing list [email protected] http://lists.callweaver.org/mailman/listinfo/callweaver-users
