Hi there, I'm new to Callweaver after abandoning asterisk due to lack of t.38 support. Although I thought I was getting close with t38modem, however I could not get past compiling OPAL due to missing libexpat-1 header files.
Anyway, so far I've managed to Callweaver installed and running. It took some trial and error to find a working combo of spandsp, libvale, and callweaver versions. The current winning combo I found was: Centos 5.0, spandsp-0.0.6pre12, vale-0.0.2, and /release/callweaver-1.2.1 Ever since I've been pulling out hair (not that I have much left) editing the sip.conf and extension.conf files. Current status is that I've got my VSP's SIP peer showing "OK (52ms)" and my test X-lite softphone peer showing Unmonitored. My next objective is to be able to make an outgoing call from the X-lite softphone to the PSTN via my sip provider. This is where I'm stuck. I suspect I'm missing a link between my extension and a trunk. With FreePBX I had no problems configuring this, but unfortunately I had to give up FreePBX to try Callweaver. Hope you can help or point me in the right direction? Thanks, Pete ________________________________ This communication including any email attachments is confidential. If you are not the intended recipient you are hereby notified that any use, disclosure or action taken in reliance on this email is unauthorized and strictly prohibited. If you have received the email in error please reply to the sender and destroy all copies. The sender does not warrant that this email is free from viruses and other defects. By opening this email you accept responsibility for all damages whether direct or indirect and agree that the sender's liability, if any, is limited to the re-supply of the email. The views expressed herein are those of the individual and not the organization unless expressly stated otherwise.
_______________________________________________ Callweaver-users mailing list Callweaver-users@callweaver.org http://lists.callweaver.org/mailman/listinfo/callweaver-users
