That sounds about right... I think that was the error message I was receiving
as well.
I've been attempting to get T.38 working with
IAXmodem/Hylafax/{Asterisk|Callweaver} for some time now. My eventual route has
been to do SIP/T.38 to a Cisco gateway (1760 w/ DSPs) that pushes the calls to
an onboard PRI port(VWIC). This PRI port is connected to my
{Asterisk|Callweaver} system's PRI card which is in turn routed through to the
IAXmodems. Simple right? :-) It's a bit more complicated but it gets the job
done.
--Tim
----- Original Message -----
From: "Peter Verhoeven" <pe...@morrisint.com.au>
To: "Users Mailing List - Non-Commercial Discussion"
<callweaver-users@callweaver.org>
Sent: Tuesday, November 17, 2009 8:04:52 PM
Subject: Re: [Callweaver-users] hylafax -> iaxmodem -> callweaver
Thanks Tim - it gives a warning that SipT38SwitchOver can only be used on SIP
channels, and then fails with the "exceptionally long queue" errors.
So looks I'll need to write some inhouse software that creates the manual spool
files and copies them to the outgoing directory and let CallWeaver do the rest.
Basically noone in the world has a software based T.38 outgoing fax server is
my conclusion. Really weird given how long this technology has been around and
how unreliable any other form of ip based faxing is!
Cheers,
Pete
_______________________________________________
Callweaver-users mailing list
Callweaver-users@callweaver.org
http://lists.callweaver.org/mailman/listinfo/callweaver-users
