I have taken what I wanted off a 24 inch vertical process camera. What is left is: 2 large stepper motors 1.8 degree per step, 3V. All the Drive electronics for the motors. They are attached to two jack screws and followers with one being a recirculating ball type. At the other end of the jackscrews are rotary encoders. There are also six rotary springs to help support the base and lens board as they move. There is the primary transformer if you are looking for an isolation transformer, and several power supplies. There is also a density meter buried in among the electronics I can not figure out how to split it out. . This is a 80's vintage camera with DIP type of packaging for the IC's And the metal chassis is there. The outline dimensions are about 3'X 5' x 5'. It is located in Ft Collins and I can load it with a fork lift. Email me if interested. [EMAIL PROTECTED] _______________________________________________ Cameramakers mailing list [EMAIL PROTECTED] http://rmp.opusis.com/mailman/listinfo/cameramakers
