Just a week ago I made some bellows for a 4x5 camera but being a student I can't afford much. So I found one of the cheapest ways of making them is to cut a peice card board (or plastic film) into strips, like most people say where you don't want the bellows to fold.
I found that you can get normal contact (self-adhesive book or decorative covering) for about $2.00 for 2 meters. Then you stick the strip on it, in the arangment you want. after if you want you can stick either some thin paper or fabric inside of it to make it more stronger or light proof. And if you also want different colors, you can also stick different colours over the top. Besides by using these metirals the bellows will look like the bellows on newer cameras, if thats what you want. And also the bellows are fairly rain resistant compaired to some. Good luck making them if your gonna. http://movies.yahoo.com.au - Yahoo! Movies - What's on at your local cinema? _______________________________________________ Cameramakers mailing list [EMAIL PROTECTED] http://rmp.opusis.com/mailman/listinfo/cameramakers
