Jon Elson <[EMAIL PROTECTED]> wrote:
walid wrote:
>
>Dear jon
>
> How can I protect my gecko drives in case of motor loose wire
>
>
Buy a more expensive drive that is designed to tolerate abuse.
///It seems that the majority of posts regarding damaging a Gecko pertain to the
stepper motors drives. Stepper motor drives are much more complex. Steppers are pulsed
at 10 -20 times their rated voltage. Then the voltage is chopped to rated voltage at
idle/hold. Seems like a recipe for problems. I use the Gecko 320 servo drives and they
are one tough little beast. Just the other day I was drilling holes all day with the
Gecko whipping the knee of my Bridgeport up and down peck drilling and the servo
warmed up but the Gecko stayed nice and cool on the heatsink under the fan. When I was
doing my retrofit, I layed a Gecko320 down next to one of my Nema 42 servos and was
not convinced it was going to work. It's tiny in comparison. My motors were 4.2"
diameter X 17" long body, a bit shorter since I removed the brake. There are pics of
my machine on the CNC-pics group at yahoo. Yes, Gecko 320's control those servos with
rapids on X an Y of 120 ipm and 60 ipm on Z. Much to my amaz
ement.
I'm sold on them and wouldnt even consider using any other drive. 15 months of
continual use and not one problem. I was concerned at first about getting into the
middle of a job and not being able to complete it because of a possible drive failure.
I've become very complacent about their reliability. I even designed the enclosure so
the drives on their heatsink easily slide out of a slot in like a tree in front of the
fan because I thought I would be changing them occasionally. Waste of time.
Ron
None of
the low-cost
hobby-market drives are built with the kind of circuits that will
prevent this
kind of damage. I can't recommend any specific models. I don't know which
makes/models might have such sophisticated safety controls.
Jon
Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
Post Messages: [EMAIL PROTECTED]
Subscribe: [EMAIL PROTECTED]
Unsubscribe: [EMAIL PROTECTED]
List owner: [EMAIL PROTECTED], [EMAIL PROTECTED], [EMAIL PROTECTED]
Moderator: [EMAIL PROTECTED] [EMAIL PROTECTED] [EMAIL PROTECTED] [Moderators]
URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
OFF Topic POSTS: General Machining
If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if you have
trouble.
http://www.metalworking.com/news_servers.html
http://groups.yahoo.com/group/jobshophomeshop I consider this to be a sister site to
the CCED group, as many of the same members are there, for OT subjects, that are not
allowed on the CCED list.
NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM. DON'T POST IF
YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
bill
List Mom
List Owner
Yahoo! Groups Links
---------------------------------
Do you Yahoo!?
Yahoo! Mail Address AutoComplete - You start. We finish.
[Non-text portions of this message have been removed]
Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
Post Messages: [EMAIL PROTECTED]
Subscribe: [EMAIL PROTECTED]
Unsubscribe: [EMAIL PROTECTED]
List owner: [EMAIL PROTECTED], [EMAIL PROTECTED], [EMAIL PROTECTED]
Moderator: [EMAIL PROTECTED] [EMAIL PROTECTED] [EMAIL PROTECTED] [Moderators]
URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
OFF Topic POSTS: General Machining
If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if you have
trouble.
http://www.metalworking.com/news_servers.html
http://groups.yahoo.com/group/jobshophomeshop I consider this to be a sister site to
the CCED group, as many of the same members are there, for OT subjects, that are not
allowed on the CCED list.
NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM. DON'T POST
IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
bill
List Mom
List Owner
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
