--- In [EMAIL PROTECTED], Andy Wander <[EMAIL PROTECTED]> wrote: > Jon: > > Yes, I did misinterpret what you were saying-it sounded to me like the specs > that were quoted from the MPJA catalog were saying that you couldn't use the > full current rating of the transformer, and that you were agreeing with > that. Or maybe you are thinking that the transformer is rated at 10A only IF > you use the center tap for building a power supply? > > Sorry about the misunderstanding. > > I still want to see that cartalog page; I swear it sounds like the numbers > quoted awere related to SIZING of the cap or coil, and NOT the actual output > current capability. > > I may have to dig up my MPJA catalog......
It is only in print on the catalogue and the guy at MPJA said they quoted it from the suppliers pages. I started thinking more about it. 24VAC to DC to cap to 33 volts DC for 240 watts. Theoreticaly, it is now around 7 amps at 33 volts for 240 watts 24 VAC to DC to inductor to 24 VDC for 240 watts. With the cap, you have an increase in voltage and a subsquent loss of current if only from the watts standpoint. Factor in the innefficiences of the transformer and the cap and you don't loose all at much more. Dave Addresses: FAQ: http://www.ktmarketing.com/faq.html FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/ Post Messages: [EMAIL PROTECTED] Subscribe: [EMAIL PROTECTED] Unsubscribe: [EMAIL PROTECTED] List owner: [EMAIL PROTECTED], [EMAIL PROTECTED], [EMAIL PROTECTED] Moderator: [EMAIL PROTECTED] [EMAIL PROTECTED] [EMAIL PROTECTED] [Moderators] URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO OFF Topic POSTS: General Machining If you wish to post on unlimited OT subjects goto: aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if you have trouble. http://www.metalworking.com/news_servers.html http://groups.yahoo.com/group/jobshophomeshop I consider this to be a sister site to the CCED group, as many of the same members are there, for OT subjects, that are not allowed on the CCED list. NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........ bill List Mom List Owner Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
