Brian from sunny Suffolk wrote:
> Ron Jones wrote on 06/04/2008 :
>> Tony Brooks wrote:
>>> --- In [email protected], "sean neill"
>>> <[EMAIL PROTECTED]> wrote:
>>>>
>>>
>>> snip
>>>
>>>
>>>>
>>>>   ...and what about burning bio fuel oil - I guess you would need
>>>>   to alter the boiler to do this.
>>>>
>>>> That's the route I'm exploring (waste oil).
>>>>
>>>> Sean
>>>
>>> Waste oil, now there's a thought. Garages have to pay to have the
>>> stuff taken away and if you let it stand for long enough a lot of
>>> the carbon drops out. i can not see this being anything like as
>>> polluting as the heave oil they use on ships and as you should be
>>> able to ensure loads of air it should not produce much smoke once
>>> the boiler and "fuel blower" is up to temperature. May have to
>>> starts on diesel though.
>>>
>>> Now we are on low sulphur fuel it should be less acidic than of old.
>>>
>>> Only draw back I can see (until told different) is the laws about
>>> disposing of hazardous waste . You may have to get licensed so you
>>> can collect it.
>>>
>>> Tony Brooks
>>
>> Ooooh, don't mention the "W" word.  Once something has been declared
>> waste, then it can only be removed by an approved waste disposal
>> company.  You need to get your hands on it before it's declared
>> waste.  Call it "oil for recycling", just don't call it "waste oil".
>>
>>
> When I worked offshore we started shipping all the drilling "waste"
> ashore. This consisted of ground up rock from drilling wells and oil
> which is used as a drilling lubricant and a hydrostatic plug to stop
> the gas coming up.
> Once ashore this waste was treated, all the oil removed and recycled
> leaving clean ground rock. We tried to GIVE this material to the local
> council to resurface footpaths etc. but the government wanted to
> charge us for disposing of waste.


That does not surprise me.
At work we have to have several "waste" streams - the cost varies depending 
on the type.  One stream is "clean dichloromethane" (- note not called 
waste) that comes from using dcm in a process, and then distilling it out - 
as it's such a low boiler (39C) then it's resonably pure - that goes off for 
re-use elsewhere, I doubt if we get anything for it, but the other option of 
putting it in the halogenated waste would be very expensive.

-Ron Jones
Process Safety & Development Specialist
Don't repeat history, unreported chemical lab/plant near misses at
http://www.crhf.org.uk Only two things are certain: The universe and
human stupidity; and I'm not certain about the universe. ~ Albert
Einstein 


Reply via email to