I'm trying to use the SureFit segmentation, and it always stops with
an out of memory message, both on my 1GB MacBook (intel Mac) and 2GB
Red Hat Linux workstation. I'm starting with a standard human MRI in
Analyze (hdr/img) format, with 1x1x1.5 mm (128 x 128 x 62 voxels).
Then I defined the AC, rescaled to 8-bit (0-255), resampled to 1x1x1
mm, and saved the output to a new hdr/img pair.
The SureFit segmentation proceeds for about 10 minutes, then stops
while either "Determining the inner boundary" or "Determining the
outer boundary" saying that Caret is unable to acquire more memory,
with a "Continue" button and an "Exit Caret" button. Indeed, at this
point, Caret has used up all available RAM plus roughly half of the
available swap space, with no other programs running. Pressing the
Continue button simply pops up the same box again, while "exit caret"
behaves as advertised.
I'm wondering if something is configured wrong on my installation, or
if there's something strange with my input MRIs. Please let me know
if there are any suggestions.
Thanks,
Sarang Dalal
_________________
/ \___________________
| Sarang S. Dalal \_______
| UCSF Biomagnetic Imaging Laboratory \
| UCSF/Berkeley Bioengineering Graduate Group )
| http://tempest.ucsf.edu/~sarang/ __________/
| [EMAIL PROTECTED] ______/
| +1.415.476.6888 _________/
\_________________/
