This seems to work on my end:
caret_command -metric-composite-identified-columns test.metric
deformed_RH_01Visac_beta.metric 'cCue_EndoLeft.nii[1]'
deformed_RH_02Visac_beta.metric 'cCue_EndoLeft.nii[1]'
I end up with this:
Column Minimum Maximum Mean Sample Dev %
Positive % Negative Column Name
1 -0.071 0.052 0.001 0.011
49.951 50.049 cCue_EndoLeft.nii[1]
2 -0.066 0.089 0.001 0.011
44.949 55.051 cCue_EndoLeft.nii[1]
The first is subject 1's cCue_EndoLeft.nii[1] column; the second is
subject 2's cCue_EndoLeft.nii[1].
On 04/02/2010 07:42 AM, Julia Bender wrote:
> Hi Donna,
>
> I tried your 2nd suggestion and it ALMOST worked:
> for CONDITION in `ls /mrt/Visac/*Visac/stats/*Visac_fullGLM/c*.nii`
> do
> OUTFILE=RH_`basename $CONDITION .nii`.metric
> CONDITION=`basename $CONDITION`[1]
>
> ENTRIES=""
> for METRIC in `ls
> /mrt/Visac/group_metrics/Visac_fullGLM/deformed_RH_*Visac_beta.metric`
> do
> ENTRIES="$METRIC $CONDITION"
> done
> caret_command -metric-composite-identified-columns $OUTFILE $ENTRIES
> done
>
> The code is running through and is creating four metric files with correct
> names. But the output metric files only contain the information of sub02.
> So somehow the code seems to overwrite the information of sub01 and does
> not combine the information of the two subjects:
>
> Filename: RH_cCue_EndoLeft.metric (output file)
> Number of Nodes: 73730
> Number of Columns: 1
> Column Minimum Maximum Mean Sample Dev %
> Positive % Negative Column Name
> 1 -0.066 0.089 0.001 0.011
> 44.949 55.051 cCue_EndoLeft.nii[1]
>
>
> Filename: deformed_RH_02Visac_beta.metric (input sub02)
> Number of Nodes: 73730
> Number of Columns: 4
> Column Minimum Maximum Mean Sample Dev %
> Positive % Negative Column Name
> 1 -0.066 0.089 0.001 0.011
> 44.949 55.051 cCue_EndoLeft.nii[1]
> 2 -0.039 0.102 0.005 0.011
> 60.243 39.757 cCue_EndoRight.nii[1]
> 3 -0.025 0.103 0.005 0.011
> 60.221 39.779 cCue_ExoLeft.nii[1]
> 4 -0.025 0.116 0.007 0.011
> 64.321 35.679 cCue_ExoRight.nii[1]
>
> So somehow caret_command doesn't get the arguments the way it needs to.
> I've tried to feed in the input files without the *for loop* but then the
> 2nd input file is taken as condition name. I wondered how the structure of
> ENTRIES looks like: [METRIC_1 METRIC_2 CONDITION_1 CONDITION_2
> CONDITION_3 CONDITION_4]? It seems like ENTRIES is the key here.
>
> I couldn't figure out how to do your first approach (my computational
> skills are very basic), but as far as I understand,the above problem would
> occur as well so, right?
>
> thanks a lot!
>
> Julia
>
>
>
>
>> Julia,
>>
>> The problem is a trailing bucket index '[1]' in the column name, e.g.:
>>
>> caret_command -metric-information /upload/deformed_RH_01Visac_beta.metric
>>
>> 1 -0.071 0.052 0.001 0.011
>> 49.951 50.049 cCue_EndoLeft.nii[1]
>> 2 -0.050 0.076 0.005 0.010
>> 65.433 34.567 cCue_EndoRight.nii[1]
>> 3 -0.044 0.060 0.005 0.009
>> 70.949 29.051 cCue_ExoLeft.nii[1]
>> 4 -0.078 0.072 0.001 0.011
>> 52.947 47.053 cCue_ExoRight.nii[1]
>>
>> I haven't had a chance to figure out exactly how to get around this, but
>> there are two approaches:
>>
>> * strip the '[1]' from the column-name -- probably using a combination
>> of caret_command -metric-information (to get the current name), sed (to
>> strip the trailing '[1]'), and caret_command -metric-set-column-name (to
>> set the column-name to the stripped version).
>>
>> * massage CONDITION in the script to add the '[1]'; this is easy enough,
>> but I think to make the shell happy, you'll need for the whole
>> column-name to be in single quotes, which is a bit tricky to pull off.
>> Getting those quotes to survive this part is the tricky bit:
>>
>> ENTRIES="$METRIC $CONDITION"
>>
>>
>> Try your hand at one or both of these approaches. Let me know if you
>> get stuck.
>>
>> Note: I'm taking tomorrow afternoon off.
>>
>> Donna
>>
>> On 04/01/2010 02:52 PM, Julia Bender wrote:
>>
>>> Donna,
>>>
>>> I've uploaded both deformed*.metric files, so you can have a look.
>>> Thanks so much for your help.
>>>
>>> Julia
>>>
>>>
>>>
>>>> Julia,
>>>>
>>>> Please upload deformed_RH_02Visac_beta.metric here:
>>>>
>>>> http://pulvinar.wustl.edu/cgi-bin/upload.cgi
>>>>
>>>> Also, where your script reads like so:
>>>>
>>>> OUTFILE=RH_$CONDITION.metric
>>>> CONDITION=`basename $CONDITION`
>>>>
>>>> ... change it to read:
>>>>
>>>> CONDITION=`basename $CONDITION`
>>>> OUTFILE=RH_"$CONDITION".metric
>>>>
>>>> I didn't realize the basename step should have preceded the OUTFILE
>>>> definition until I had already hit send.
>>>>
>>>> The quotes around $CONDITION are needed due to the RH_ preceding the
>>>> variable name.
>>>>
>>>> But that error suggests your actual column names do not match the
>>>> volume
>>>> names exactly. For example, might they be preceded by "AFM " or "MFM "
>>>> or
>>>> something like that? Looking at your actual metric file will help me
>>>> pinpoint the problem.
>>>>
>>>> Donna
>>>>
>>>>
>>>> On 04/01/2010 06:20 AM, Julia Bender wrote:
>>>>
>>>>
>>>>> Hi Donna,
>>>>>
>>>>> yes, you're right, that's exactly what I want. Unfortunately the
>>>>> script
>>>>> you've sent me doesnt' go through and I don't know why. I did:
>>>>>
>>>>> for CONDITION in `ls /mrt/Visac/*Visac/stats/*Visac_fullGLM/c*.nii`
>>>>> do
>>>>> OUTFILE=RH_$CONDITION.metric
>>>>> CONDITION=`basename $CONDITION`
>>>>> ENTRIES=""
>>>>> for METRIC in `ls
>>>>> /mrt/Visac/group_metrics/Visac_fullGLM/deformed_RH_*Visac_beta.metric`
>>>>> do
>>>>> ENTRIES="$METRIC $CONDITION"
>>>>> done
>>>>>
>>>>> caret_command -metric-composite-identified-columns $OUTFILE
>>>>> $ENTRIES
>>>>> done
>>>>>
>>>>> I get:
>>>>>
>>>>> METRIC COMPOSITE IDENTIFIED COLUMNS ERROR: ERROR column name/number
>>>>> cCue_EndoLeft.nii not found in file deformed_RH_02Visac_beta.metric
>>>>>
>>>>>
>>>>> METRIC COMPOSITE IDENTIFIED COLUMNS ERROR: ERROR column name/number
>>>>> cCue_EndoRight.nii not found in file deformed_RH_02Visac_beta.metric
>>>>>
>>>>>
>>>>> METRIC COMPOSITE IDENTIFIED COLUMNS ERROR: ERROR column name/number
>>>>> cCue_ExoLeft.nii not found in file deformed_RH_02Visac_beta.metric
>>>>>
>>>>>
>>>>> METRIC COMPOSITE IDENTIFIED COLUMNS ERROR: ERROR column name/number
>>>>> cCue_ExoRight.nii not found in file deformed_RH_02Visac_beta.metric
>>>>>
>>>>>
>>>>> METRIC COMPOSITE IDENTIFIED COLUMNS ERROR: ERROR column name/number
>>>>> cCue_EndoLeft.nii not found in file deformed_RH_02Visac_beta.metric
>>>>>
>>>>>
>>>>> METRIC COMPOSITE IDENTIFIED COLUMNS ERROR: ERROR column name/number
>>>>> cCue_EndoRight.nii not found in file deformed_RH_02Visac_beta.metric
>>>>>
>>>>>
>>>>> METRIC COMPOSITE IDENTIFIED COLUMNS ERROR: ERROR column name/number
>>>>> cCue_ExoLeft.nii not found in file deformed_RH_02Visac_beta.metric
>>>>>
>>>>>
>>>>> METRIC COMPOSITE IDENTIFIED COLUMNS ERROR: ERROR column name/number
>>>>> cCue_ExoRight.nii not found in file deformed_RH_02Visac_beta.metric
>>>>>
>>>>>
>>>>> This is weird because both deformed_RH_01Visac* and
>>>>> deformed_RH_02Visac*
>>>>> are in the same folder, have the same permissions and the header info
>>>>> is
>>>>> the same (despite the sub# of course):
>>>>> :
>>>>> BeginHeader
>>>>> Caret-Version 5.613
>>>>> Date 2010-03-30T14:22:43
>>>>> comment Deformed from: RH_02Visac_beta.metric Deformed with:
>>>>> deformed_Human.02Visac.R.73730.deform_map
>>>>> encoding BINARY
>>>>> EndHeader
>>>>> tag-version 2
>>>>> tag-number-of-nodes 73730
>>>>> tag-number-of-columns 4
>>>>> tag-title
>>>>> tag-column-name 0 cCue_EndoLeft.nii[1]
>>>>> tag-column-name 1 cCue_EndoRight.nii[1]
>>>>> tag-column-name 2 cCue_ExoLeft.nii[1]
>>>>> tag-column-name 3 cCue_ExoRight.nii[1]
>>>>> tag-column-comment 0 CARET v5.613 Mapped to surface:
>>>>> Human.02Visac.R.Fiducial.65561.coord Mapped from volume:
>>>>> cCue_EndoLeft.nii Subvolume: 0 Algorithm: Metric Enclosing
>>>>> Voxel intent:
>>>>> None intent_code: 0 intent_p1: 0.000 intent_p2: 0.000
>>>>> intent_p3:
>>>>> 0.000 Date Mapped: 30.03.10 14:22 Deformed with:
>>>>> deformed_Human.02Visac.R.73730.deform_map
>>>>> tag-column-comment 1 CARET v5.613 Mapped to surface:
>>>>> Human.02Visac.R.Fiducial.65561.coord Mapped from volume:
>>>>> cCue_EndoRight.nii Subvolume: 0 Algorithm: Metric Enclosing
>>>>> Voxel intent:
>>>>> None intent_code: 0 intent_p1: 0.000 intent_p2: 0.000
>>>>> intent_p3:
>>>>> 0.000 Date Mapped: 30.03.10 14:22 Deformed with:
>>>>> deformed_Human.02Visac.R.73730.deform_map
>>>>> tag-column-comment 2 CARET v5.613 Mapped to surface:
>>>>> Human.02Visac.R.Fiducial.65561.coord Mapped from volume:
>>>>> cCue_ExoLeft.nii Subvolume: 0 Algorithm: Metric Enclosing
>>>>> Voxel intent:
>>>>> None intent_code: 0 intent_p1: 0.000 intent_p2: 0.000
>>>>> intent_p3:
>>>>> 0.000 Date Mapped: 30.03.10 14:22 Deformed with:
>>>>> deformed_Human.02Visac.R.73730.deform_map
>>>>> tag-column-comment 3 CARET v5.613 Mapped to surface:
>>>>> Human.02Visac.R.Fiducial.65561.coord Mapped from volume:
>>>>> cCue_ExoRight.nii Subvolume: 0 Algorithm: Metric Enclosing
>>>>> Voxel intent:
>>>>> None intent_code: 0 intent_p1: 0.000 intent_p2: 0.000
>>>>> intent_p3:
>>>>> 0.000 Date Mapped: 30.03.10 14:22 Deformed with:
>>>>> deformed_Human.02Visac.R.73730.deform_map
>>>>> tag-column-study-meta-data 0
>>>>> tag-column-study-meta-data 1
>>>>> tag-column-study-meta-data 2
>>>>> tag-column-study-meta-data 3
>>>>> tag-column-color-mapping 0 -1.000000 1.000000
>>>>> tag-column-color-mapping 1 -1.000000 1.000000
>>>>> tag-column-color-mapping 2 -1.000000 1.000000
>>>>> tag-column-color-mapping 3 -1.000000 1.000000
>>>>> tag-column-threshold 0 0.000000 0.000000
>>>>> tag-column-threshold 1 0.000000 0.000000
>>>>> tag-column-threshold 2 0.000000 0.000000
>>>>> tag-column-threshold 3 0.000000 0.000000
>>>>> tag-column-average-threshold 0 0.000000 0.000000
>>>>> tag-column-average-threshold 1 0.000000 0.000000
>>>>> tag-column-average-threshold 2 0.000000 0.000000
>>>>> tag-column-average-threshold 3 0.000000 0.000000
>>>>> tag-BEGIN-DATA
>>>>>
>>>>> also I don't understand why I get the error message twice for every
>>>>> condition. I'm sorry this is so persistent...
>>>>>
>>>>> Thanks a lot,
>>>>>
>>>>> Julia
>>>>>
>>>>>
>>>>>
>>>>>> Julia,
>>>>>>
>>>>>> Okay, if I understand you correctly, deformed_RH_*.metric does NOT
>>>>>>
>>>>>>
>>>>>>
>>>>> contain a single column, but rather multiple columns for different
>>>>> conditions for the same subject. Thus, you can't use this:
>>>>>
>>>>>
>>>>>
>>>>>> COL_ENTRIES="$COL_ENTRIES `basename $EACHCOL` 1"
>>>>>>
>>>>>> ... because the " 1" means grab the first column. I suggested this,
>>>>>>
>>>>>>
>>>>>>
>>>>> thinking you had only a single column in your metric file, which
>>>>> appears
>>>>> to be not the case.
>>>>>
>>>>>
>>>>>
>>>>>> So, you need to get the column name exactly right, and evidently you
>>>>>>
>>>>>>
>>>>>>
>>>>> haven't.
>>>>>
>>>>>
>>>>>
>>>>>> Maybe instead you need:
>>>>>>
>>>>>> for CONDITION in `ls /mrt/Visac/*Visac/stats/*Visac_fullGLM/c*.nii`
>>>>>> do
>>>>>> OUTFILE=my.$CONDITION.metric
>>>>>> CONDITION=`basename $CONDITION`
>>>>>> ENTRIES=""
>>>>>> for METRIC in `ls
>>>>>> /mrt/Visac/group_metrics/Visac_fullGLM/deformed_RH_*Visac_beta.metric`
>>>>>> do
>>>>>> ENTRIES="$METRIC $CONDITION"
>>>>>> done
>>>>>> caret_command -metric-composite-identified-columns $OUTFILE
>>>>>> $ENTRIES
>>>>>> done
>>>>>>
>>>>>> Donna
>>>>>>
>>>>>> On 03/31/2010 09:57 AM, Julia Bender wrote:
>>>>>>
>>>>>>
>>>>>>
>>>>>>> Hi Donna,
>>>>>>> thanks for your help. `ls
>>>>>>>
>>>>>>>
>>>>>>>
>>>>> /mrt/Visac/*Visac/stats/*Visac_fullGLM/c*.nii`
>>>>>
>>>>>
>>>>>
>>>>>>> only specifies the conds =column names. The stat-values are stored
>>>>>>> in
>>>>>>>
>>>>>>>
>>>>>>>
>>>>> $CURRDIR/deformed_RH_*.metric files, one for each subject. So my code
>>>>> needs to take the names of the .nii files, find each of the so
>>>>> specified
>>>>>
>>>>>
>>>>>
>>>>>>> columns in each of the two deformed.metrics files, and combine them
>>>>>>>
>>>>>>>
>>>>>>>
>>>>> into
>>>>>
>>>>>
>>>>>
>>>>>>> one metric file. So I think what I need is 2 loops. I tried this:
>>>>>>>
>>>>>>>
>>>>>>>
>>>>> OUTFILE=my_composite.metric
>>>>>
>>>>>
>>>>>
>>>>>>> rm -rf $OUTFILE
>>>>>>> COL_ENTRIES=""
>>>>>>> MET_ENTRIES=""
>>>>>>> for EACHCOL in `ls /mrt/Visac/*Visac/stats/*Visac_fullGLM/c*.nii` do
>>>>>>> COL_ENTRIES="$COL_ENTRIES `basename $EACHCOL` 1"
>>>>>>> done
>>>>>>> for EACHMETRIC in `ls
>>>>>>> /mrt/Visac/group_metrics/Visac_fullGLM/deformed_RH_*Visac_beta.metric`
>>>>>>> do
>>>>>>> MET_ENTRIES="$MET_ENTRIES $EACHMETRIC 1"
>>>>>>> done
>>>>>>> caret_command -metric-composite-identified-columns $OUTFILE
>>>>>>> $EACHMETRIC
>>>>>>>
>>>>>>>
>>>>>>>
>>>>> $COL_ENTRIES
>>>>>
>>>>>
>>>>>
>>>>>>> I get: METRIC COMPOSITE IDENTIFIED COLUMNS ERROR: ERROR column
>>>>>>> name/number
>>>>>>> cCue_EndoLeft.nii not found in file deformed_RH_02Visac_beta.metric
>>>>>>>
>>>>>>>
>>>>>>>
>>>>> deformed_RH_02Visac_beta.metric looks the same as the file for subj 01
>>>>> and
>>>>>
>>>>>
>>>>>
>>>>>>> is in the same folder. Any ideas what could be wrong?
>>>>>>> Also, what is the "1" at the end of the line for?
>>>>>>> Thanks a lot!!
>>>>>>> Julia
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>> Julia,
>>>>>>>> Here is the usage for this command:
>>>>>>>> caret_command -metric-composite-identified-columns
>>>>>>>> <output-metric-file-name>
>>>>>>>> [input-metric-file-1 file-1-column]
>>>>>>>> ...
>>>>>>>> [input-metric-file-N file-2-column]
>>>>>>>> Composite the selected columns from the input metric
>>>>>>>> files and place them into the output metric file.
>>>>>>>> "column" is either the number of the column, which
>>>>>>>> starts at one, or the name of the column. If a
>>>>>>>> a name contains spaces, it must be enclosed in double
>>>>>>>> quotes.
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>> Name has priority over number.
>>>>>
>>>>>
>>>>>
>>>>>>>> I'm not 100% certain, but I think file-1-column refers to what the
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>> column is named in the input file, rather than what you want it to
>>>>>>> be
>>>>>>>
>>>>>>>
>>>>>>>
>>>>> named in the output file. So if there is just a single column in
>>>>> $EACHCOL, the simplest thing is to just specify 1 there, to indicate
>>>>> the
>>>>>
>>>>>
>>>>>
>>>>>>> first (and only) column.
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>> I think I would do this, instead of what you have:
>>>>>>>> OUTFILE=my_composite.metric
>>>>>>>> rm -rf $OUTFILE
>>>>>>>> COL_ENTRIES=""
>>>>>>>> for EACHCOL in `ls /mrt/Visac/*Visac/stats/*Visac_fullGLM/c*.nii`
>>>>>>>> do
>>>>>>>> COL_ENTRIES="$COL_ENTRIES $EACHCOL 1"
>>>>>>>> done
>>>>>>>> caret_command -metric-composite-identified-columns $OUTFILE
>>>>>>>> $COL_ENTRIES
>>>>>>>> Note that there should be only one caret_command, but it should
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>> specify
>>>>>
>>>>>
>>>>>
>>>>>>> all four cols. All you need the loop for is to generate this part
>>>>>>> of
>>>>>>>
>>>>>>>
>>>>>>>
>>>>> the command:
>>>>>
>>>>>
>>>>>
>>>>>>>> [input-metric-file-1 file-1-column]
>>>>>>>> ...
>>>>>>>> [input-metric-file-N file-2-column]
>>>>>>>> Donna
>>>>>>>> On 03/30/2010 10:19 AM, Julia Bender wrote:
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>> Hi,
>>>>>>>>> thanks for your help. I'm trying to composite four conds columns
>>>>>>>>> from
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>> two
>>>>>
>>>>>
>>>>>
>>>>>>>>> subjects' deformed-metric-files into one combined metric file: for
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>> EACHCOL in `ls /mrt/Visac/*Visac/stats/*Visac_fullGLM/c*.nii` (= my
>>>>>
>>>>>
>>>>>
>>>>>>> four conds files)
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>>> do
>>>>>>>>> caret_command -metric-composite-identified-columns
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>> $CURRDIR/RH_`basename
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>>> $EACHCOL .nii`.metric $CURRDIR/deformed_RH_*.metric `basename
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>> $EACHCOL
>>>>>
>>>>>
>>>>>
>>>>>>> .nii`
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>>> done
>>>>>>>>> I get: "METRIC COMPOSITE IDENTIFIED COLUMNS ERROR: ERROR column
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>> name/number cCue_EndoLeft (=my first conds column) not found in file
>>>>>>>
>>>>>>>
>>>>>>>
>>>>> deformed_RH_01Visac_beta.metric"
>>>>>
>>>>>
>>>>>
>>>>>>>>> CURRDIR is the directory were the deformed-metric-files are. I
>>>>>>>>> have
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>> full
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>>> permission on all files. In the deformed-metric-files the columns
>>>>>>>>> are
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>> named like this: tag-column-name 0 cCue_EndoLeft.nii[1]
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>>> I understand that I need to specify either column name or number
>>>>>>>>> so
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>> that
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>>> columns are combined correctly. I tried to do that with `basename
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>> $EACHCOL
>>>>>
>>>>>
>>>>>
>>>>>>>>> .nii` , which obviously doesn't work. Do you know how I can assign
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>> name/number in the loop?
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>>> Thanks a lot!
>>>>>>>>> Julia
>>>>>>>>> Dipl. Psych. Julia Bender
>>>>>>>>> Humboldt Universität zu Berlin
>>>>>>>>> Mathematisch - Naturwissenschaftliche Fakultät II
>>>>>>>>> Institut für Psychologie, Abt. Klinische Psychologie
>>>>>>>>> Unter den Linden 6
>>>>>>>>> D-10099 Berlin
>>>>>>>>> _______________________________________________
>>>>>>>>> caret-users mailing list
>>>>>>>>> [email protected]
>>>>>>>>> http://brainvis.wustl.edu/mailman/listinfo/caret-users
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>> _______________________________________________
>>>>>>>> caret-users mailing list
>>>>>>>> [email protected]
>>>>>>>> http://brainvis.wustl.edu/mailman/listinfo/caret-users
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>> Dipl. Psych. Julia Bender
>>>>>>> Humboldt Universität zu Berlin
>>>>>>> Mathematisch - Naturwissenschaftliche Fakultät II
>>>>>>> Institut für Psychologie, Abt. Klinische Psychologie
>>>>>>> Unter den Linden 6
>>>>>>> D-10099 Berlin
>>>>>>> _______________________________________________
>>>>>>> caret-users mailing list
>>>>>>> [email protected]
>>>>>>> http://brainvis.wustl.edu/mailman/listinfo/caret-users
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>> _______________________________________________
>>>>>> caret-users mailing list
>>>>>> [email protected]
>>>>>> http://brainvis.wustl.edu/mailman/listinfo/caret-users
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>> Dipl. Psych. Julia Bender
>>>>> Humboldt Universität zu Berlin
>>>>> Mathematisch - Naturwissenschaftliche Fakultät II
>>>>> Institut für Psychologie, Abt. Klinische Psychologie
>>>>> Unter den Linden 6
>>>>> D-10099 Berlin
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> _______________________________________________
>>>>> caret-users mailing list
>>>>> [email protected]
>>>>> http://brainvis.wustl.edu/mailman/listinfo/caret-users
>>>>>
>>>>>
>>>>>
>>>> _______________________________________________
>>>> caret-users mailing list
>>>> [email protected]
>>>> http://brainvis.wustl.edu/mailman/listinfo/caret-users
>>>>
>>>>
>>>>
>>> Dipl. Psych. Julia Bender
>>> Humboldt Universität zu Berlin
>>> Mathematisch - Naturwissenschaftliche Fakultät II
>>> Institut für Psychologie, Abt. Klinische Psychologie
>>> Unter den Linden 6
>>> D-10099 Berlin
>>>
>>> _______________________________________________
>>> caret-users mailing list
>>> [email protected]
>>> http://brainvis.wustl.edu/mailman/listinfo/caret-users
>>>
>>>
>> _______________________________________________
>> caret-users mailing list
>> [email protected]
>> http://brainvis.wustl.edu/mailman/listinfo/caret-users
>>
>>
_______________________________________________
caret-users mailing list
[email protected]
http://brainvis.wustl.edu/mailman/listinfo/caret-users
