Bonjour,
avis aux chevronn�s:
J'aimerais avoir vos impressions et suggestions sur ce qui s'affiche
depuis un certain temps � chaque d�marrage de ma testing;
pr�cision: j'ai discover et hotplug qu'on m'avait sugg�r�, pour la DC
usb mais �a ralentit le d�marrage:
...
insmod: /lib/modules/2.4.26-1-686/kernel/drivers/usb/host/uhci.o: insmod
uhci failed
uhci: can't be loaded
missing kernel or user mode drive uhci
pci [success]
usb
usbcore: already loaded
(10 fois l'un en-dessous de l'autre)
usb [success]
done
...suite de la sequence de d�marrage sns probl�me jusqu'au login.
J'attache une sortie lsmod, ps ax, ainsi que /etc/modules et dmesg.
(je peux envoyer mon syslog en perso, il est trop gros pour ici).
Merci d'avance pour m'�clairer, me dire si je charge un module de trop
ou trop peu/ou le mauvais, etc...
Aldo.
# /etc/modules: kernel modules to load at boot time.
#
# This file should contain the names of kernel modules that are
# to be loaded at boot time, one per line. Comments begin with
# a "#", and everything on the line after them are ignored.
af_packet
8139too
nls_cp437
nls_cp850
nls_iso8859-1
lp
sg
ide-scsi
emu10k1
#usb-uhci
#usb-storage
#input
#usbkbd
#keybdev
#stv680
#dc2xx
#aic7xxx
#apm
Module Size Used by Not tainted
ehci-hcd 18696 0 (unused)
i810_rng 2720 0 (unused)
emu10k1-gp 1480 0 (unused)
gameport 1676 0 [emu10k1-gp]
aic7xxx 152568 0 (unused)
usb-uhci 23500 0 (unused)
usbcore 64064 1 [ehci-hcd usb-uhci]
sd_mod 12044 0 (autoclean) (unused)
vfat 10956 1 (autoclean)
fat 33368 0 (autoclean) [vfat]
dm-mod 49464 0 (unused)
emu10k1 62600 0
ac97_codec 13736 0 [emu10k1]
sound 59252 0 [emu10k1]
soundcore 3908 7 [emu10k1 sound]
ide-scsi 10512 0
sg 33164 0 (unused)
scsi_mod 95736 4 [aic7xxx sd_mod ide-scsi sg]
parport_pc 23816 1 (autoclean)
lp 7040 0 (unused)
parport 26656 1 [parport_pc lp]
nls_iso8859-1 2844 0 (unused)
nls_cp850 3580 0 (unused)
nls_cp437 4348 2
8139too 15496 1
mii 2560 0 [8139too]
crc32 2912 0 [8139too]
af_packet 13608 0 (unused)
rtc 7228 0 (autoclean)
ext2 51916 2 (autoclean)
ext3 83468 0 (autoclean)
jbd 42880 0 (autoclean) [ext3]
ide-detect 288 0 (autoclean) (unused)
piix 9120 2 (autoclean)
ide-disk 17184 4 (autoclean)
ide-core 112140 4 (autoclean) [ide-scsi ide-detect piix
ide-disk]
unix 15688 4 (autoclean)
USER PID %CPU %MEM VSZ RSS TTY STAT START TIME COMMAND
root 1 0.0 0.0 1492 508 ? S 08:52 0:00 init [2]
root 2 0.0 0.0 0 0 ? S 08:52 0:00 [keventd]
root 3 0.0 0.0 0 0 ? SN 08:52 0:00 [ksoftirqd_CPU0]
root 4 0.0 0.0 0 0 ? S 08:52 0:00 [kswapd]
root 5 0.0 0.0 0 0 ? S 08:52 0:00 [bdflush]
root 6 0.0 0.0 0 0 ? S 08:52 0:00 [kupdated]
root 252 0.0 0.1 4176 800 ? Ss 08:52 0:00 /sbin/brltty -P
/var/run/brltty.pid
root 340 0.0 0.1 4176 800 ? S 08:52 0:00 \_ /sbin/brltty
-P /var/run/brltty.pid
root 341 0.0 0.1 4176 800 ? S 08:52 0:00 \_
/sbin/brltty -P /var/run/brltty.pid
root 255 0.0 0.0 0 0 ? S 08:52 0:00 [kcopyd]
root 368 0.0 0.0 0 0 ? S 08:52 0:00 [khubd]
root 436 0.0 0.0 0 0 ? S 08:52 0:00 [ahc_dv_0]
root 437 0.0 0.0 0 0 ? S 08:52 0:00 [scsi_eh_1]
daemon 1073 0.0 0.0 1600 436 ? Ss 08:53 0:00 /sbin/portmap
root 1162 0.0 0.1 2240 804 ? Ss 08:53 0:00 /sbin/syslogd
root 1165 0.0 0.2 2160 1216 ? Ss 08:53 0:00 /sbin/klogd
root 1179 0.0 0.1 2220 724 ? Ss 08:53 0:00 /usr/sbin/inetd
lp 1183 0.0 0.1 2452 860 ? Ss 08:53 0:00 /usr/sbin/lpd -s
root 1190 0.0 0.2 3388 1440 ? Ss 08:53 0:00 /usr/sbin/sshd
daemon 1199 0.0 0.1 1672 624 ? Ss 08:53 0:00 /usr/sbin/atd
root 1202 0.0 0.1 1756 800 ? Ss 08:53 0:00 /usr/sbin/cron
root 1212 0.0 0.9 6832 4668 ? S 08:53 0:00 /usr/bin/perl -w
/usr/sbin/ddclient -daemon 90s -syslog
root 1217 0.0 0.3 3244 1676 tty1 Ss 08:53 0:00 -bash
root 1250 0.0 0.1 2472 808 tty1 R+ 09:06 0:00 \_ ps auxfw
olr 1218 0.0 0.3 3240 1672 tty2 Ss 08:53 0:00 -bash
olr 1226 0.0 0.4 4788 2356 tty2 S+ 08:53 0:00 \_ mutt
olr 1219 0.0 0.3 3248 1704 tty3 Ss+ 08:53 0:00 -bash
root 1220 0.0 0.0 1484 468 tty4 Ss+ 08:53 0:00 /sbin/getty
38400 tty4
root 1221 0.0 0.0 1484 468 tty5 Ss+ 08:53 0:00 /sbin/getty
38400 tty5
root 1222 0.0 0.0 1484 468 tty6 Ss+ 08:53 0:00 /sbin/getty
38400 tty6
Linux version 2.4.26-1-686 ([EMAIL PROTECTED]) (gcc version 3.2.3 (Debian)) #1
Tue Aug 24 13:46:05 JST 2004
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001ff2fc00 (usable)
BIOS-e820: 000000001ff2fc00 - 000000001ff30000 (ACPI NVS)
BIOS-e820: 000000001ff30000 - 000000001ff40000 (ACPI data)
BIOS-e820: 000000001ff40000 - 000000001fff0000 (ACPI NVS)
BIOS-e820: 000000001fff0000 - 0000000020000000 (reserved)
BIOS-e820: 00000000fecf0000 - 00000000fecf1000 (reserved)
BIOS-e820: 00000000fed20000 - 00000000feda0000 (reserved)
0MB HIGHMEM available.
511MB LOWMEM available.
found SMP MP-table at 000ff780
hm, page 000ff000 reserved twice.
hm, page 00100000 reserved twice.
hm, page 000fc000 reserved twice.
hm, page 000fd000 reserved twice.
On node 0 totalpages: 130863
zone(0): 4096 pages.
zone(1): 126767 pages.
zone(2): 0 pages.
ACPI: RSDP (v000 ACPIAM ) @ 0x000f6130
ACPI: RSDT (v001 INTEL D865GBF 0x20030924 MSFT 0x00000097) @ 0x1ff30000
ACPI: FADT (v002 INTEL D865GBF 0x20030924 MSFT 0x00000097) @ 0x1ff30200
ACPI: MADT (v001 INTEL D865GBF 0x20030924 MSFT 0x00000097) @ 0x1ff30300
ACPI: ASF! (v016 LEGEND I865PASF 0x00000001 MSFT 0x0100000d) @ 0x1ff34550
ACPI: TCPA (v001 INTEL TBLOEMID 0x00000001 MSFT 0x00000097) @ 0x1ff345e9
ACPI: WDDT (v001 INTEL OEMWDDT 0x00000001 MSFT 0x0100000d) @ 0x1ff3461d
ACPI: DSDT (v001 INTEL D865GBF 0x00000001 MSFT 0x0100000d) @ 0x00000000
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 Pentium 4(tm) XEON(tm) APIC version 20
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Processor #1 Pentium 4(tm) XEON(tm) APIC version 20
ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
Using ACPI for processor (LAPIC) configuration information
Intel MultiProcessor Specification v1.4
Virtual Wire compatibility mode.
OEM ID: Product ID: Springdale-G APIC at: 0xFEE00000
I/O APIC #2 Version 32 at 0xFEC00000.
Enabling APIC mode: Flat. Using 1 I/O APICs
Processors: 2
Kernel command line: root=/dev/hdb5 ro BOOT_IMAGE=vmlinuz
Initializing CPU#0
Detected 2793.274 MHz processor.
Console: colour VGA+ 80x50
Calibrating delay loop... 5570.56 BogoMIPS
Memory: 510528k/523452k available (1241k kernel code, 12536k reserved, 462k
data, 116k init, 0k highmem)
Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
Inode cache hash table entries: 32768 (order: 6, 262144 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 32768 (order: 5, 131072 bytes)
Page-cache hash table entries: 131072 (order: 7, 524288 bytes)
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: After generic, caps: bfebfbff 00000000 00000000 00000000
CPU: Common caps: bfebfbff 00000000 00000000 00000000
CPU: Intel(R) Pentium(R) 4 CPU 2.80GHz stepping 09
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
ENABLING IO-APIC IRQs
Setting 2 in the phys_id_present_map
...changing IO-APIC physical APIC ID to 2 ... ok.
init IO_APIC IRQs
IO-APIC (apicid-pin) 2-0, 2-20 not connected.
..TIMER: vector=0x31 pin1=2 pin2=0
number of MP IRQ sources: 26.
number of IO-APIC #2 registers: 24.
testing the IO APIC.......................
IO APIC #2......
.... register #00: 02000000
....... : physical APIC id: 02
....... : Delivery Type: 0
....... : LTS : 0
.... register #01: 00178020
....... : max redirection entries: 0017
....... : PRQ implemented: 1
....... : IO APIC version: 0020
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 000 00 1 0 0 0 0 0 0 00
01 001 01 0 0 0 0 0 1 1 39
02 001 01 0 0 0 0 0 1 1 31
03 001 01 0 0 0 0 0 1 1 41
04 001 01 0 0 0 0 0 1 1 49
05 001 01 0 0 0 0 0 1 1 51
06 001 01 0 0 0 0 0 1 1 59
07 001 01 0 0 0 0 0 1 1 61
08 001 01 0 0 0 0 0 1 1 69
09 001 01 1 1 0 0 0 1 1 71
0a 001 01 0 0 0 0 0 1 1 79
0b 001 01 0 0 0 0 0 1 1 81
0c 001 01 0 0 0 0 0 1 1 89
0d 001 01 0 0 0 0 0 1 1 91
0e 001 01 0 0 0 0 0 1 1 99
0f 001 01 0 0 0 0 0 1 1 A1
10 001 01 1 1 0 1 0 1 1 A9
11 001 01 1 1 0 1 0 1 1 B1
12 001 01 1 1 0 1 0 1 1 B9
13 001 01 1 1 0 1 0 1 1 C1
14 000 00 1 0 0 0 0 0 0 00
15 001 01 1 1 0 1 0 1 1 C9
16 001 01 1 1 0 1 0 1 1 D1
17 001 01 1 1 0 1 0 1 1 D9
IRQ to pin mappings:
IRQ0 -> 0:2
IRQ1 -> 0:1
IRQ3 -> 0:3
IRQ4 -> 0:4
IRQ5 -> 0:5
IRQ6 -> 0:6
IRQ7 -> 0:7
IRQ8 -> 0:8
IRQ9 -> 0:9
IRQ10 -> 0:10
IRQ11 -> 0:11
IRQ12 -> 0:12
IRQ13 -> 0:13
IRQ14 -> 0:14
IRQ15 -> 0:15
IRQ16 -> 0:16
IRQ17 -> 0:17
IRQ18 -> 0:18
IRQ19 -> 0:19
IRQ21 -> 0:21
IRQ22 -> 0:22
IRQ23 -> 0:23
.................................... done.
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 2793.1460 MHz.
..... host bus clock speed is 199.5102 MHz.
cpu: 0, clocks: 1995102, slice: 997551
CPU0<T0:1995088,T1:997536,D:1,S:997551,C:1995102>
mtrr: v1.40 (20010327) Richard Gooch ([EMAIL PROTECTED])
mtrr: detected mtrr type: Intel
ACPI: Subsystem revision 20040326
ACPI: Interpreter disabled.
PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=2
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: ACPI tables contain no PCI IRQ routing entries
PCI: Probing PCI hardware (bus 00)
PCI: Ignoring BAR0-3 of IDE controller 00:1f.1
Transparent bridge - Intel Corp. 82801BA/CA/DB/EB PCI Bridge
PCI: Using IRQ router PIIX/ICH [8086/24d0] at 00:1f.0
PCI->APIC IRQ transform: (B0,I29,P0) -> 16
PCI->APIC IRQ transform: (B0,I29,P1) -> 19
PCI->APIC IRQ transform: (B0,I29,P2) -> 18
PCI->APIC IRQ transform: (B0,I29,P0) -> 16
PCI->APIC IRQ transform: (B0,I29,P3) -> 23
PCI->APIC IRQ transform: (B0,I31,P0) -> 18
PCI->APIC IRQ transform: (B0,I31,P0) -> 18
PCI->APIC IRQ transform: (B0,I31,P1) -> 17
PCI->APIC IRQ transform: (B0,I31,P1) -> 17
PCI->APIC IRQ transform: (B1,I0,P0) -> 16
PCI->APIC IRQ transform: (B2,I0,P0) -> 21
PCI->APIC IRQ transform: (B2,I1,P0) -> 22
PCI->APIC IRQ transform: (B2,I2,P0) -> 17
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
VFS: Disk quotas vdquot_6.5.1
devfs: v1.12c (20020818) Richard Gooch ([EMAIL PROTECTED])
devfs: boot_options: 0x0
Detected PS/2 Mouse Port.
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT
SHARE_IRQ SERIAL_PCI enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
COMX: driver version 0.85 (C) 1995-1999 ITConsult-Pro Co. <[EMAIL PROTECTED]>
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
Initializing Cryptographic API
NET4: Linux TCP/IP 1.0 for NET4.0
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 65536)
Linux IP multicast router 0.06 plus PIM-SM
RAMDISK: cramfs filesystem found at block 0
RAMDISK: Loading 4256 blocks [1 disk] into ram disk...
|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/done.
Freeing initrd memory: 4256k freed
VFS: Mounted root (cramfs filesystem).
Freeing unused kernel memory: 116k freed
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ide: late registration of driver.
ICH5: IDE controller at PCI slot 00:1f.1
PCI: Enabling device 00:1f.1 (0005 -> 0007)
ICH5: chipset revision 2
ICH5: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:DMA
ICH5-SATA: IDE controller at PCI slot 00:1f.2
ICH5-SATA: chipset revision 2
ICH5-SATA: 100% native mode on irq 18
ide2: BM-DMA at 0xdc00-0xdc07, BIOS settings: hde:pio, hdf:pio
ide3: BM-DMA at 0xdc08-0xdc0f, BIOS settings: hdg:pio, hdh:pio
hda: IBM-DHEA-36480, ATA DISK drive
hdb: WDC WD1200JB-00EVA0, ATA DISK drive
blk: queue e082aac0, I/O limit 4095Mb (mask 0xffffffff)
blk: queue e082abfc, I/O limit 4095Mb (mask 0xffffffff)
hdc: PLEXTOR CD-R PX-W4012A, ATAPI CD/DVD-ROM drive
hdd: PIONEER DVD-RW DVR-107D, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: attached ide-disk driver.
hda: 12692736 sectors (6499 MB) w/476KiB Cache, CHS=12592/16/63, UDMA(33)
hdb: attached ide-disk driver.
hdb: 234441648 sectors (120034 MB) w/8192KiB Cache, CHS=14593/255/63, UDMA(100)
Partition check:
/dev/ide/host0/bus0/target0/lun0: [PTBL] [790/255/63] p1 p2 < p5 p6 p7 p8 p9 >
/dev/ide/host0/bus0/target1/lun0: p1 p2 p3 p4 < p5 p6 p7 p8 p9 p10 >
Journalled Block Device driver loaded
ext3: No journal on filesystem on ide0(3,69)
ext3: No journal on filesystem on ide0(3,69)
Adding Swap: 506008k swap-space (priority -1)
Real Time Clock Driver v1.10f
8139too Fast Ethernet driver 0.9.26
eth0: RealTek RTL8139 at 0xb400, 00:48:54:6f:f1:ec, IRQ 22
eth0: Identified 8139 chip type 'RTL-8139B'
parport0: PC-style at 0x378 [PCSPP,TRISTATE]
parport0: Printer, Canon BJC-4300
lp0: using parport0 (polling).
SCSI subsystem driver Revision: 1.00
hdc: attached ide-scsi driver.
hdd: attached ide-scsi driver.
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
Vendor: PLEXTOR Model: CD-R PX-W4012A Rev: 1.02
Type: CD-ROM ANSI SCSI revision: 02
Vendor: PIONEER Model: DVD-RW DVR-107D Rev: 1.10
Type: CD-ROM ANSI SCSI revision: 02
Creative EMU10K1 PCI Audio Driver, version 0.20, 13:51:27 Aug 24 2004
emu10k1: EMU10K1 rev 10 model 0x8065 found, IO at 0xb000-0xb01f, IRQ 17
ac97_codec: AC97 Audio codec, id: 0x8384:0x7608 (SigmaTel STAC9708)
emu10k1: SBLive! 5.1 card detected
device-mapper: 4.1.1-ioctl (2004-04-07) initialised: [EMAIL PROTECTED]
Intel 810 + AC97 Audio, version 0.24, 13:50:01 Aug 24 2004
i810_audio: Pure MMIO interfaces not yet supported.
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.275 $ time 13:50:30 Aug 24 2004
usb-uhci.c: High bandwidth mode enabled
PCI: Setting latency timer of device 00:1d.0 to 64
usb-uhci.c: USB UHCI at I/O 0xcc00, IRQ 16
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
PCI: Setting latency timer of device 00:1d.1 to 64
usb-uhci.c: USB UHCI at I/O 0xd000, IRQ 19
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 2 ports detected
PCI: Setting latency timer of device 00:1d.2 to 64
usb-uhci.c: USB UHCI at I/O 0xd400, IRQ 18
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 3
hub.c: USB hub found
hub.c: 2 ports detected
PCI: Setting latency timer of device 00:1d.3 to 64
usb-uhci.c: USB UHCI at I/O 0xd800, IRQ 16
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 4
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
scsi1 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.36
<Adaptec 2940 Ultra SCSI adapter>
aic7880: Ultra Wide Channel A, SCSI Id=7, 16/253 SCBs
blk: queue dd868294, I/O limit 4095Mb (mask 0xffffffff)
(scsi1:A:5:0): refuses WIDE negotiation. Using 8bit transfers
(scsi1:A:5:0): refuses synchronous negotiation. Using asynchronous transfers
Vendor: IOMEGA Model: ZIP 100 Rev: N*32
Type: Direct-Access ANSI SCSI revision: 02
blk: queue dd868394, I/O limit 4095Mb (mask 0xffffffff)
Attached scsi removable disk sda at scsi1, channel 0, id 5, lun 0
sda: Unit Not Ready, sense:
Current 00:00: sense key Not Ready
Additional sense indicates Medium not present
sda : READ CAPACITY failed.
sda : status = 1, message = 00, host = 0, driver = 08
Current sd00:00: sense key Not Ready
Additional sense indicates Medium not present
sda : block size assumed to be 512 bytes, disk size 1GB.
/dev/scsi/host1/bus0/target5/lun0: I/O error: dev 08:00, sector 0
I/O error: dev 08:00, sector 0
unable to read partition table
gameport0: Emu10k1 Gameport at 0xbc00 size 8 speed 1104 kHz
8139cp: 10/100 PCI Ethernet driver v1.1 (Aug 30, 2003)
Intel 810 + AC97 Audio, version 0.24, 13:50:01 Aug 24 2004
i810_audio: Pure MMIO interfaces not yet supported.
i810_rng hardware driver 0.9.8 loaded
hw_random: misc device register failed
PCI: Setting latency timer of device 00:1d.7 to 64
ehci_hcd 00:1d.7: Intel Corp. 82801EB USB2
ehci_hcd 00:1d.7: irq 23, pci mem e099ec00
usb.c: new USB bus registered, assigned bus number 5
ehci_hcd 00:1d.7: enabled 64bit PCI DMA
PCI: cache line size of 128 is not supported by device 00:1d.7
ehci_hcd 00:1d.7: USB 2.0 enabled, EHCI 1.00, driver 2003-Dec-29/2.4
hub.c: USB hub found
hub.c: 8 ports detected
uhci.c: USB Universal Host Controller Interface driver v1.1
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
_______________________________________________
Liste de diffusion CarrefourBLinuX
[EMAIL PROTECTED]
http://lists.freearchive.org/mailman/listinfo/carrefourblinux
Signets : http://fr.groups.yahoo.com/group/carrefourblinux/links/
Archives : http://lists.freearchive.org/pipermail//carrefourblinux
Anciennes archives (Yahoogroupes) :
http://fr.groups.yahoo.com/group/carrefourblinux/messages
Pour s'inscire par courriel :
'mailto:[EMAIL PROTECTED]'
Pour se desinscrire par courriel :
'mailto:[EMAIL PROTECTED]'
