Si toi tu as réussi à avoir le wi-fi en faisant une mise à jour de ton noyau je devrai peut-être faire pareil alors !
Euh mais concrètement ça me fait un peu peur. Je ne vais pas foutre en l'air mon multi-boot ? Il faut faire un : # apt-get install kernel image blablabla ? Merci à bientôt, Raphaël Le 3 janvier 2009 19:08, Guillaume GOURDIER <[email protected]> a écrit : > Bonsoir la liste, > > il y a peu, j'ai fais une upgrade de ma distrib debian. > Avant j'avais le noyaux 2-6-24 et maintenant j'ai le 2-6-26. > Je ne connais pas les modifications qu'ils ont apporté à ce noyaux mais, > tout ce que je sais c'est que mon adapter wifi est reconnu maintenant. > J'ai tout de même un problème, j'ai un message qui s'affiche très souvent > dans la console, et ne connaissant pas trop pour l'instant l'init du système > j'aimerai bien que vous m'aidiez à identifier le problème. > Je précise que quelques temps avant l'upgrae, j'avais installé un module qui > était sensé détecter et faire fonctionner ma carte wifi le module s'appelle > iwl3945. > Il n'est pas dans /etc/init.d. > Pour cela, je vais poster un dmesg qui vous aiguillera je pense. > Le message : > [ 23.449772] firmware: requesting iwlwifi-3945-1.ucode > [ 23.533390] iwl3945: iwlwifi-3945-1.ucode firmware file req failed: > Reason -2 > [ 23.533390] iwl3945: Could not read microcode: -2 > [ 23.533390] ACPI: PCI interrupt for device 0000:05:00.0 disabled > > > le dmseg complet : > [ 0.000000] Initializing cgroup subsys cpuset > [ 0.000000] Initializing cgroup subsys cpu > [ 0.000000] Linux version 2.6.26-1-686 (Debian 2.6.26-12) > ([email protected]) (gcc version 4.1.3 20080704 (prerelease) (Debian > 4.1.2-24)) #1 SMP Mon Dec 15 18:15:07 UTC 2008 > [ 0.000000] BIOS-provided physical RAM map: > [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) > [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) > [ 0.000000] BIOS-e820: 00000000000e0000 - 00000000000eee00 (reserved) > [ 0.000000] BIOS-e820: 00000000000eee00 - 00000000000ef000 (ACPI NVS) > [ 0.000000] BIOS-e820: 00000000000ef000 - 0000000000100000 (reserved) > [ 0.000000] BIOS-e820: 0000000000100000 - 000000003ff90000 (usable) > [ 0.000000] BIOS-e820: 000000003ff90000 - 0000000040000000 (reserved) > [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec28000 (reserved) > [ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) > [ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) > [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) > [ 0.000000] BIOS-e820: 00000000feda0000 - 00000000fedc0000 (reserved) > [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) > [ 0.000000] BIOS-e820: 00000000ffb00000 - 00000000ffc00000 (reserved) > [ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved) > [ 0.000000] 127MB HIGHMEM available. > [ 0.000000] 896MB LOWMEM available. > [ 0.000000] Entering add_active_range(0, 0, 262032) 0 entries of 256 used > [ 0.000000] Zone PFN ranges: > [ 0.000000] DMA 0 -> 4096 > [ 0.000000] Normal 4096 -> 229376 > [ 0.000000] HighMem 229376 -> 262032 > [ 0.000000] Movable zone start PFN for each node > [ 0.000000] early_node_map[1] active PFN ranges > [ 0.000000] 0: 0 -> 262032 > [ 0.000000] On node 0 totalpages: 262032 > [ 0.000000] DMA zone: 32 pages used for memmap > [ 0.000000] DMA zone: 0 pages reserved > [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 > [ 0.000000] Normal zone: 1760 pages used for memmap > [ 0.000000] Normal zone: 223520 pages, LIFO batch:31 > [ 0.000000] HighMem zone: 256 pages used for memmap > [ 0.000000] HighMem zone: 32400 pages, LIFO batch:7 > [ 0.000000] Movable zone: 0 pages used for memmap > [ 0.000000] DMI 2.4 present. > [ 0.000000] ACPI: RSDP 000F01E0, 0014 (r0 TOSHIB) > [ 0.000000] ACPI: RSDT 3FF90000, 0040 (r1 TOSHIB A003B 20060821 TASM > 4010000) > [ 0.000000] ACPI: FACP 3FF90074, 0084 (r2 TOSHIB A003B 20060821 TASM > 4010000) > [ 0.000000] ACPI: DSDT 3FF900F8, 7B63 (r2 TOSHIB A003B 20070222 MSFT > 100000E) > [ 0.000000] ACPI: FACS 000EEE00, 0040 > [ 0.000000] ACPI: SSDT 3FF97C5B, 0306 (r2 TOSHIB A003B 20060907 MSFT > 100000E) > [ 0.000000] ACPI: APIC 3FF98813, 0068 (r1 TOSHIB A003B 20060821 TASM > 4010000) > [ 0.000000] ACPI: MCFG 3FF9887B, 003C (r1 TOSHIB A003B 20060821 TASM > 4010000) > [ 0.000000] ACPI: HPET 3FF988B7, 0038 (r1 TOSHIB A003B 20060821 TASM > 4010000) > [ 0.000000] ACPI: SLIC 3FF98921, 0176 (r1 TOSHIB A003B 20060821 TASM > 4010000) > [ 0.000000] ACPI: SSDT 3FF98A97, 0076 (r2 TOSHIB A003B 20060912 MSFT > 100000E) > [ 0.000000] ACPI: DMI detected: Toshiba > [ 0.000000] ACPI: PM-Timer IO Port: 0xd808 > [ 0.000000] ACPI: Local APIC address 0xfee00000 > [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) > [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) > [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) > [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) > [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) > [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI > 0-23 > [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) > [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) > [ 0.000000] ACPI: IRQ0 used by override. > [ 0.000000] ACPI: IRQ2 used by override. > [ 0.000000] ACPI: IRQ9 used by override. > [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs > [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 > [ 0.000000] Using ACPI (MADT) for SMP configuration information > [ 0.000000] Allocating PCI resources starting at 50000000 (gap: > 40000000:bec00000) > [ 0.000000] PM: Registered nosave memory: 000000000009f000 - > 00000000000a0000 > [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - > 00000000000e0000 > [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - > 00000000000ee000 > [ 0.000000] PM: Registered nosave memory: 00000000000ee000 - > 00000000000ef000 > [ 0.000000] PM: Registered nosave memory: 00000000000ef000 - > 0000000000100000 > [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs > [ 0.000000] PERCPU: Allocating 37960 bytes of per cpu data > [ 0.000000] NR_CPUS: 8, nr_cpu_ids: 2 > [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total > pages: 259984 > [ 0.000000] Kernel command line: root=/dev/sda3 ro > [ 0.000000] mapped APIC to ffffb000 (fee00000) > [ 0.000000] mapped IOAPIC to ffffa000 (fec00000) > [ 0.000000] Enabling fast FPU save and restore... done. > [ 0.000000] Enabling unmasked SIMD FPU exception support... done. > [ 0.000000] Initializing CPU#0 > [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) > [ 0.000000] Detected 1662.625 MHz processor. > [ 0.004000] Console: colour VGA+ 80x25 > [ 0.004000] console [tty0] enabled > [ 0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 > bytes) > [ 0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 > bytes) > [ 0.004000] Memory: 1028084k/1048128k available (1769k kernel code, > 19356k reserved, 752k data, 244k init, 130624k highmem) > [ 0.004000] virtual kernel memory layout: > [ 0.004000] fixmap : 0xfff4c000 - 0xfffff000 ( 716 kB) > [ 0.004000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) > [ 0.004000] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) > [ 0.004000] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) > [ 0.004000] .init : 0xc037f000 - 0xc03bc000 ( 244 kB) > [ 0.004000] .data : 0xc02ba46b - 0xc0376620 ( 752 kB) > [ 0.004000] .text : 0xc0100000 - 0xc02ba46b (1769 kB) > [ 0.004000] Checking if this processor honours the WP bit even in > supervisor mode...Ok. > [ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated > [ 0.004000] hpet clockevent registered > [ 0.083875] Calibrating delay using timer specific routine.. 3329.26 > BogoMIPS (lpj=6658530) > [ 0.084005] Security Framework initialized > [ 0.084005] SELinux: Disabled at boot. > [ 0.084005] Capability LSM initialized > [ 0.084005] Mount-cache hash table entries: 512 > [ 0.084005] Initializing cgroup subsys ns > [ 0.084005] Initializing cgroup subsys cpuacct > [ 0.084005] Initializing cgroup subsys devices > [ 0.084005] CPU: L1 I cache: 32K, L1 D cache: 32K > [ 0.084005] CPU: L2 cache: 2048K > [ 0.084005] CPU: Physical Processor ID: 0 > [ 0.084005] CPU: Processor Core ID: 0 > [ 0.084005] Intel machine check architecture supported. > [ 0.084005] Intel machine check reporting enabled on CPU#0. > [ 0.084005] using mwait in idle threads. > [ 0.084005] Checking 'hlt' instruction... OK. > [ 0.100006] ACPI: Core revision 20080321 > [ 0.111010] ENABLING IO-APIC IRQs > [ 0.111287] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 > [ 0.151042] CPU0: Intel Genuine Intel(R) CPU T2300 @ 1.66GHz > stepping 08 > [ 0.152009] Booting processor 1/1 ip 6000 > [ 0.160010] Initializing CPU#1 > [ 0.160010] Calibrating delay using timer specific routine.. 3325.04 > BogoMIPS (lpj=6650097) > [ 0.160010] CPU: L1 I cache: 32K, L1 D cache: 32K > [ 0.160010] CPU: L2 cache: 2048K > [ 0.160010] CPU: Physical Processor ID: 0 > [ 0.160010] CPU: Processor Core ID: 1 > [ 0.160010] Intel machine check architecture supported. > [ 0.160010] Intel machine check reporting enabled on CPU#1. > [ 0.240015] CPU1: Intel Genuine Intel(R) CPU T2300 @ 1.66GHz > stepping 08 > [ 0.240015] checking TSC synchronization [CPU#0 -> CPU#1]: passed. > [ 0.244015] Brought up 2 CPUs > [ 0.244015] Total of 2 processors activated (6654.31 BogoMIPS). > [ 0.244015] CPU0 attaching sched-domain: > [ 0.244015] domain 0: span 0-1 > [ 0.244015] groups: 0 1 > [ 0.244015] CPU1 attaching sched-domain: > [ 0.244015] domain 0: span 0-1 > [ 0.244015] groups: 1 0 > [ 0.244015] net_namespace: 660 bytes > [ 0.244015] Booting paravirtualized kernel on bare hardware > [ 0.244015] NET: Registered protocol family 16 > [ 0.244015] ACPI: bus type pci registered > [ 0.244015] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - > 63 > [ 0.244015] PCI: Not using MMCONFIG. > [ 0.244015] PCI: PCI BIOS revision 2.10 entry at 0xfd9eb, last bus=7 > [ 0.244015] PCI: Using configuration type 1 for base access > [ 0.244015] Setting up standard PCI resources > [ 0.248015] ACPI: EC: Look up EC in DSDT > [ 0.251702] ACPI Error (dsobject-0501): Package List length (C) larger > than NumElements count (3), truncated > [ 0.251858] [20080321] > [ 0.254678] ACPI: Interpreter enabled > [ 0.254756] ACPI: (supports S0 S3 S4 S5) > [ 0.255695] ACPI: Using IOAPIC for interrupt routing > [ 0.255826] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - > 63 > [ 0.260519] PCI: MCFG area at f0000000 reserved in ACPI motherboard > resources > [ 0.260601] PCI: Using MMCONFIG for extended config space > [ 0.268855] ACPI: PCI Root Bridge [PCI0] (0000:00) > [ 0.272855] pci 0000:00:1f.0: quirk: region d800-d87f claimed by ICH6 > ACPI/GPIO/TCO > [ 0.272855] pci 0000:00:1f.0: quirk: region eec0-eeff claimed by ICH6 > GPIO > [ 0.272855] PCI: Transparent bridge - 0000:00:1e.0 > [ 0.272855] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] > [ 0.272855] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] > [ 0.272855] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT] > [ 0.272855] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXCB._PRT] > [ 0.272855] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.MPEX._PRT] > [ 0.272855] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] > [ 0.276855] ACPI: PCI Interrupt Link [LNKA] (IRQs *10) > [ 0.276855] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *11) > [ 0.277681] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *11) > [ 0.278408] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *11) > [ 0.283096] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *11) > [ 0.283823] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *11) > [ 0.284550] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *11) > [ 0.285367] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *11) > [ 0.288728] Linux Plug and Play Support v0.97 (c) Adam Belay > [ 0.288728] pnp: PnP ACPI init > [ 0.288728] ACPI: bus type pnp registered > [ 0.292728] pnp 00:09: can't add resource for IO 0x4d0-0x4d1 > [ 0.296728] pnp: PnP ACPI: found 14 devices > [ 0.296728] ACPI: ACPI bus type pnp unregistered > [ 0.296728] PnPBIOS: Disabled by ACPI PNP > [ 0.296728] PCI: Using ACPI for IRQ routing > [ 0.302527] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 > [ 0.302841] hpet0: 3 64-bit timers, 14318180 Hz > [ 0.303968] ACPI: RTC can wake from S4 > [ 0.306523] system 00:00: iomem range 0x0-0x9ffff could not be reserved > [ 0.306605] system 00:00: iomem range 0xe0000-0xfffff could not be > reserved > [ 0.306685] system 00:00: iomem range 0x100000-0x3ff8ffff could not be > reserved > [ 0.306776] system 00:00: iomem range 0x3ff90000-0x3ff9ffff could not be > reserved > [ 0.306867] system 00:00: iomem range 0x3ffa0000-0x3fffffff could not be > reserved > [ 0.306958] system 00:00: iomem range 0xfec00000-0xfec27fff could not be > reserved > [ 0.307048] system 00:00: iomem range 0xfed14000-0xfed19fff could not be > reserved > [ 0.307139] system 00:00: iomem range 0xfed1c000-0xfed1ffff could not be > reserved > [ 0.307230] system 00:00: iomem range 0xfed20000-0xfed3ffff could not be > reserved > [ 0.310501] system 00:00: iomem range 0xfed45000-0xfed8ffff could not be > reserved > [ 0.310592] system 00:00: iomem range 0xfeda0000-0xfedbffff could not be > reserved > [ 0.310682] system 00:00: iomem range 0xfee00000-0xfee00fff could not be > reserved > [ 0.310773] system 00:00: iomem range 0xffb00000-0xffbfffff could not be > reserved > [ 0.310864] system 00:00: iomem range 0xffe00000-0xffffffff could not be > reserved > [ 0.310958] system 00:01: iomem range 0xf0000000-0xf3ffffff has been > reserved > [ 0.311046] system 00:09: ioport range 0x480-0x48f has been reserved > [ 0.311126] system 00:09: ioport range 0xe000-0xe07f has been reserved > [ 0.311205] system 00:09: ioport range 0xe080-0xe0ff has been reserved > [ 0.311284] system 00:09: ioport range 0xe400-0xe47f has been reserved > [ 0.311363] system 00:09: ioport range 0xe480-0xe4ff has been reserved > [ 0.311402] system 00:09: ioport range 0xe800-0xe87f has been reserved > [ 0.311402] system 00:09: ioport range 0xe880-0xe8ff has been reserved > [ 0.311484] system 00:09: ioport range 0xec00-0xec7f has been reserved > [ 0.311563] system 00:09: ioport range 0xec80-0xecff has been reserved > [ 0.311643] system 00:09: ioport range 0xd800-0xd87f has been reserved > [ 0.311722] system 00:09: ioport range 0xd880-0xd89f has been reserved > [ 0.311801] system 00:09: ioport range 0xeeb0-0xeebf has been reserved > [ 0.311881] system 00:09: ioport range 0xeec0-0xeeff has been reserved > [ 0.311960] system 00:09: ioport range 0x690-0x6ff has been reserved > [ 0.343399] PCI: region 0000:06:0b.0/9 too large: > 0x0000000000000000-0x0000000003ffffff > [ 0.343399] PCI: Failed to allocate mem resource #6:20...@f0000000 for > 0000:01:00.0 > [ 0.343399] PCI: Bridge: 0000:00:01.0 > [ 0.343399] IO window: disabled. > [ 0.343399] MEM window: 0xfc000000-0xfdffffff > [ 0.343399] PREFETCH window: 0x00000000e0000000-0x00000000efffffff > [ 0.343399] PCI: Bridge: 0000:00:1c.0 > [ 0.343399] IO window: c000-cfff > [ 0.343399] MEM window: 0xffc00000-0xffcfffff > [ 0.343399] PREFETCH window: disabled. > [ 0.343399] PCI: Bridge: 0000:00:1c.1 > [ 0.343399] IO window: b000-bfff > [ 0.343479] MEM window: 0xfa000000-0xfbffffff > [ 0.343557] PREFETCH window: disabled. > [ 0.343637] PCI: Bridge: 0000:00:1c.2 > [ 0.343711] IO window: disabled. > [ 0.343790] MEM window: 0xffa00000-0xffafffff > [ 0.343868] PREFETCH window: disabled. > [ 0.343954] PCI: Bus 7, cardbus bridge: 0000:06:0b.0 > [ 0.344030] IO window: 0x00001000-0x000010ff > [ 0.344109] IO window: 0x00001400-0x000014ff > [ 0.344188] MEM window: 0x50000000-0x53ffffff > [ 0.344266] PCI: Bridge: 0000:00:1e.0 > [ 0.344342] IO window: 1000-1fff > [ 0.344421] MEM window: 0xff900000-0xff9fffff > [ 0.344499] PREFETCH window: disabled. > [ 0.344590] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> > IRQ 16 > [ 0.344743] PCI: Setting latency timer of device 0000:00:01.0 to 64 > [ 0.344767] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> > IRQ 17 > [ 0.344920] PCI: Setting latency timer of device 0000:00:1c.0 to 64 > [ 0.344944] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> > IRQ 16 > [ 0.346391] PCI: Setting latency timer of device 0000:00:1c.1 to 64 > [ 0.346415] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> > IRQ 18 > [ 0.346569] PCI: Setting latency timer of device 0000:00:1c.2 to 64 > [ 0.346583] PCI: Setting latency timer of device 0000:00:1e.0 to 64 > [ 0.346601] pci 0000:06:0b.0: enabling device (0000 -> 0003) > [ 0.346683] ACPI: PCI Interrupt 0000:06:0b.0[A] -> GSI 21 (level, low) -> > IRQ 21 > [ 0.346866] NET: Registered protocol family 2 > [ 0.360764] IP route cache hash table entries: 32768 (order: 5, 131072 > bytes) > [ 0.361089] TCP established hash table entries: 131072 (order: 8, 1048576 > bytes) > [ 0.361904] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) > [ 0.362390] TCP: Hash tables configured (established 131072 bind 65536) > [ 0.362471] TCP reno registered > [ 0.368815] NET: Registered protocol family 1 > [ 0.369021] checking if image is initramfs...<7>Switched to high > resolution mode on CPU 1 > [ 0.512720] Switched to high resolution mode on CPU 0 > [ 0.693555] it is > [ 1.037564] Freeing initrd memory: 7023k freed > [ 1.037818] audit: initializing netlink socket (disabled) > [ 1.037818] type=2000 audit(1230900213.028:1): initialized > [ 1.041818] highmem bounce pool size: 64 pages > [ 1.041818] Total HugeTLB memory allocated, 0 > [ 1.041818] VFS: Disk quotas dquot_6.5.1 > [ 1.041818] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) > [ 1.041818] msgmni has been set to 1767 > [ 1.041818] Block layer SCSI generic (bsg) driver version 0.4 loaded > (major 253) > [ 1.041818] io scheduler noop registered > [ 1.041818] io scheduler anticipatory registered > [ 1.041818] io scheduler deadline registered > [ 1.041818] io scheduler cfq registered (default) > [ 1.041818] pci 0000:01:00.0: Boot video device > [ 1.041818] PCI: Setting latency timer of device 0000:00:01.0 to 64 > [ 1.041818] assign_interrupt_mode Found MSI capability > [ 1.041818] Allocate Port Service[0000:00:01.0:pcie00] > [ 1.041818] Allocate Port Service[0000:00:01.0:pcie03] > [ 1.041818] PCI: Setting latency timer of device 0000:00:1c.0 to 64 > [ 1.041818] assign_interrupt_mode Found MSI capability > [ 1.041818] Allocate Port Service[0000:00:1c.0:pcie00] > [ 1.041818] Allocate Port Service[0000:00:1c.0:pcie03] > [ 1.041818] PCI: Setting latency timer of device 0000:00:1c.1 to 64 > [ 1.041818] assign_interrupt_mode Found MSI capability > [ 1.041818] Allocate Port Service[0000:00:1c.1:pcie00] > [ 1.041818] Allocate Port Service[0000:00:1c.1:pcie02] > [ 1.041818] Allocate Port Service[0000:00:1c.1:pcie03] > [ 1.041818] PCI: Setting latency timer of device 0000:00:1c.2 to 64 > [ 1.041818] assign_interrupt_mode Found MSI capability > [ 1.041818] Allocate Port Service[0000:00:1c.2:pcie00] > [ 1.041818] Allocate Port Service[0000:00:1c.2:pcie03] > [ 1.041827] isapnp: Scanning for PnP cards... > [ 1.398987] isapnp: No Plug & Play device found > [ 1.402033] hpet_resources: 0xfed00000 is busy > [ 1.402108] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ > sharing enabled > [ 1.402354] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A > [ 1.402982] 00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A > [ 1.405505] brd: module loaded > [ 1.405505] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 > irq 1,12 > [ 1.409857] serio: i8042 KBD port at 0x60,0x64 irq 1 > [ 1.409940] serio: i8042 AUX port at 0x60,0x64 irq 12 > [ 1.411860] mice: PS/2 mouse device common for all mice > [ 1.411860] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0 > [ 1.411860] rtc0: alarms up to one year > [ 1.411860] cpuidle: using governor ladder > [ 1.411860] cpuidle: using governor menu > [ 1.411860] No iBFT detected. > [ 1.411860] TCP cubic registered > [ 1.411860] NET: Registered protocol family 17 > [ 1.411860] Using IPI No-Shortcut mode > [ 1.411860] registered taskstats version 1 > [ 1.411860] rtc_cmos 00:08: setting system clock to 2009-01-02 12:43:34 > UTC (1230900214) > [ 1.411860] Freeing unused kernel memory: 244k freed > [ 1.427759] input: AT Translated Set 2 keyboard as /class/input/input0 > [ 1.526392] ACPI: SSDT 3FF982A3, 00F3 (r2 TOSHIB A003B 20060907 MSFT > 100000E) > [ 1.526955] ACPI: SSDT 3FF9840C, 034E (r2 TOSHIB A003B 20060907 MSFT > 100000E) > [ 1.526955] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) > [ 1.526955] ACPI: ACPI0007:00 is registered as cooling_device0 > [ 1.526955] ACPI: SSDT 3FF98396, 0076 (r2 TOSHIB A003B 20060907 MSFT > 100000E) > [ 1.526955] ACPI: SSDT 3FF9875A, 0079 (r2 TOSHIB A003B 20060907 MSFT > 100000E) > [ 1.526955] Marking TSC unstable due to: TSC halts in idle. > [ 1.530392] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) > [ 1.530398] ACPI: ACPI0007:01 is registered as cooling_device1 > [ 1.530426] ACPI: LNXTHERM:01 is registered as thermal_zone0 > [ 1.530426] ACPI: Thermal Zone [THRM] (48 C) > [ 1.781961] ACPI: ACPI Dock Station Driver > [ 1.928034] usbcore: registered new interface driver usbfs > [ 1.928034] usbcore: registered new interface driver hub > [ 1.928179] usbcore: registered new device driver usb > [ 1.933363] e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.3-k2 > [ 1.933363] e1000e: Copyright (c) 1999-2008 Intel Corporation. > [ 1.933363] e1000e 0000:02:00.0: Disabling L1 ASPM > [ 1.933363] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> > IRQ 16 > [ 1.933363] PCI: Setting latency timer of device 0000:02:00.0 to 64 > [ 1.946157] USB Universal Host Controller Interface driver v3.0 > [ 2.032738] SCSI subsystem initialized > [ 2.051880] eth0: (PCI Express:2.5GB/s:Width x1) 00:0e:7b:33:f4:e5 > [ 2.051964] eth0: Intel(R) PRO/1000 Network Connection > [ 2.052115] eth0: MAC: 2, PHY: 2, PBA No: ffffff-0ff > [ 2.052115] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> > IRQ 23 > [ 2.052276] PCI: Setting latency timer of device 0000:00:1d.0 to 64 > [ 2.052281] uhci_hcd 0000:00:1d.0: UHCI Host Controller > [ 2.052482] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus > number 1 > [ 2.052608] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000afe0 > [ 2.052777] usb usb1: configuration #1 chosen from 1 choice > [ 2.052886] hub 1-0:1.0: USB hub found > [ 2.052968] hub 1-0:1.0: 2 ports detected > [ 2.068620] sdhci: Secure Digital Host Controller Interface driver > [ 2.068705] sdhci: Copyright(c) Pierre Ossman > [ 2.069987] libata version 3.00 loaded. > [ 2.120940] udev: renamed network interface eth0 to eth1 > [ 2.158944] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001 > [ 2.159037] usb usb1: New USB device strings: Mfr=3, Product=2, > SerialNumber=1 > [ 2.159143] usb usb1: Product: UHCI Host Controller > [ 2.159219] usb usb1: Manufacturer: Linux 2.6.26-1-686 uhci_hcd > [ 2.159296] usb usb1: SerialNumber: 0000:00:1d.0 > [ 2.159358] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> > IRQ 19 > [ 2.159358] PCI: Setting latency timer of device 0000:00:1d.1 to 64 > [ 2.159358] uhci_hcd 0000:00:1d.1: UHCI Host Controller > [ 2.159358] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus > number 2 > [ 2.159358] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000af80 > [ 2.159358] usb usb2: configuration #1 chosen from 1 choice > [ 2.159358] hub 2-0:1.0: USB hub found > [ 2.159358] hub 2-0:1.0: 2 ports detected > [ 2.260762] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 > [ 2.260852] usb usb2: New USB device strings: Mfr=3, Product=2, > SerialNumber=1 > [ 2.263048] usb usb2: Product: UHCI Host Controller > [ 2.263125] usb usb2: Manufacturer: Linux 2.6.26-1-686 uhci_hcd > [ 2.263202] usb usb2: SerialNumber: 0000:00:1d.1 > [ 2.263355] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> > IRQ 18 > [ 2.263355] PCI: Setting latency timer of device 0000:00:1d.2 to 64 > [ 2.263355] uhci_hcd 0000:00:1d.2: UHCI Host Controller > [ 2.263355] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus > number 3 > [ 2.263355] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000af60 > [ 2.263355] usb usb3: configuration #1 chosen from 1 choice > [ 2.263355] hub 3-0:1.0: USB hub found > [ 2.263355] hub 3-0:1.0: 2 ports detected > [ 2.364910] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 > [ 2.365000] usb usb3: New USB device strings: Mfr=3, Product=2, > SerialNumber=1 > [ 2.365096] usb usb3: Product: UHCI Host Controller > [ 2.365187] usb usb3: Manufacturer: Linux 2.6.26-1-686 uhci_hcd > [ 2.365264] usb usb3: SerialNumber: 0000:00:1d.2 > [ 2.368630] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> > IRQ 16 > [ 2.368630] PCI: Setting latency timer of device 0000:00:1d.3 to 64 > [ 2.368630] uhci_hcd 0000:00:1d.3: UHCI Host Controller > [ 2.368630] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus > number 4 > [ 2.368630] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000af40 > [ 2.368630] usb usb4: configuration #1 chosen from 1 choice > [ 2.368630] hub 4-0:1.0: USB hub found > [ 2.368630] hub 4-0:1.0: 2 ports detected > [ 2.398348] usb 1-1: new full speed USB device using uhci_hcd and address > 2 > [ 2.470094] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 > [ 2.470183] usb usb4: New USB device strings: Mfr=3, Product=2, > SerialNumber=1 > [ 2.470280] usb usb4: Product: UHCI Host Controller > [ 2.470370] usb usb4: Manufacturer: Linux 2.6.26-1-686 uhci_hcd > [ 2.470448] usb usb4: SerialNumber: 0000:00:1d.3 > [ 2.472632] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> > IRQ 23 > [ 2.472632] PCI: Setting latency timer of device 0000:00:1d.7 to 64 > [ 2.472632] ehci_hcd 0000:00:1d.7: EHCI Host Controller > [ 2.472632] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus > number 5 > [ 2.476632] ehci_hcd 0000:00:1d.7: debug port 1 > [ 2.476632] PCI: cache line size of 32 is not supported by device > 0000:00:1d.7 > [ 2.476632] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xffdfbc00 > [ 2.524362] Clocksource tsc unstable (delta = -269344670 ns) > [ 2.524459] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 > Dec 2004 > [ 2.524636] usb usb5: configuration #1 chosen from 1 choice > [ 2.524751] hub 5-0:1.0: USB hub found > [ 2.524834] hub 5-0:1.0: 8 ports detected > [ 2.627737] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002 > [ 2.627831] usb usb5: New USB device strings: Mfr=3, Product=2, > SerialNumber=1 > [ 2.627939] usb usb5: Product: EHCI Host Controller > [ 2.628015] usb usb5: Manufacturer: Linux 2.6.26-1-686 ehci_hcd > [ 2.628092] usb usb5: SerialNumber: 0000:00:1d.7 > [ 2.631307] ACPI: PCI Interrupt 0000:06:0b.1[B] -> GSI 20 (level, low) -> > IRQ 20 > [ 2.677431] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[20] > MMIO=[ff9ff800-ff9fffff] Max Packet=[2048] IR/IT contexts=[4/8] > [ 2.678527] sdhci: SDHCI controller found at 0000:06:0b.3 [104c:803c] > (rev 0) > [ 2.678527] ACPI: PCI Interrupt 0000:06:0b.3[D] -> GSI 23 (level, low) -> > IRQ 23 > [ 2.678527] mmc0: SDHCI at 0xff9ff700 irq 23 DMA > [ 2.684730] ata_piix 0000:00:1f.2: version 2.12 > [ 2.684755] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> > IRQ 19 > [ 2.684909] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ] > [ 2.838405] PCI: Setting latency timer of device 0000:00:1f.2 to 64 > [ 2.841995] scsi0 : ata_piix > [ 2.841995] scsi1 : ata_piix > [ 2.841995] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xaf10 irq > 14 > [ 2.841995] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xaf18 irq > 15 > [ 2.920770] usb 1-1: device not accepting address 2, error -71 > [ 2.976648] hub 1-0:1.0: unable to enumerate USB device on port 1 > [ 3.005339] ata1.00: ATA-7: HTS541010G9SA00, MBZOC60D, max UDMA/100 > [ 3.005339] ata1.00: 195371568 sectors, multi 0: LBA48 NCQ (not used) > [ 3.020902] ata1.00: configured for UDMA/100 > [ 3.185931] ata2.00: ATAPI: MATSHITADVD-RAM UJ-841S, 1.20, max UDMA/33 > [ 3.200808] ata2.00: configured for UDMA/33 > [ 3.200808] scsi 0:0:0:0: Direct-Access ATA HTS541010G9SA00 > MBZO PQ: 0 ANSI: 5 > [ 3.202909] scsi 1:0:0:0: CD-ROM MATSHITA DVD-RAM UJ-841S > 1.20 PQ: 0 ANSI: 5 > [ 3.210302] Uniform Multi-Platform E-IDE driver > [ 3.210302] ide: Assuming 33MHz system bus speed for PIO modes; override > with idebus=xx > [ 3.232755] Driver 'sd' needs updating - please use bus_type methods > [ 3.232755] sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 > MB) > [ 3.232755] sd 0:0:0:0: [sda] Write Protect is off > [ 3.232755] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 > [ 3.232755] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, > doesn't support DPO or FUA > [ 3.232755] sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 > MB) > [ 3.232755] sd 0:0:0:0: [sda] Write Protect is off > [ 3.232755] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 > [ 3.232762] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, > doesn't support DPO or FUA > [ 3.232762] sda:<4>Driver 'sr' needs updating - please use bus_type > methods > [ 3.257525] sda1 sda2 < sda5 sda6 > sda3 > [ 3.298002] sd 0:0:0:0: [sda] Attached SCSI disk > [ 3.305614] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 > cdda tray > [ 3.305614] Uniform CD-ROM driver Revision: 3.20 > [ 3.305614] sr 1:0:0:0: Attached scsi CD-ROM sr0 > [ 3.319903] sd 0:0:0:0: Attached scsi generic sg0 type 0 > [ 3.319903] sr 1:0:0:0: Attached scsi generic sg1 type 5 > [ 3.596854] PM: Starting manual resume from disk > [ 3.653294] kjournald starting. Commit interval 5 seconds > [ 3.653294] EXT3-fs: mounted filesystem with ordered data mode. > [ 3.953306] ieee1394: Host added: ID:BUS[0-00:1023] > GUID[00003900009505b4] > [ 3.956955] usb 5-7: new high speed USB device using ehci_hcd and address > 4 > [ 4.092274] usb 5-7: configuration #1 chosen from 1 choice > [ 4.092609] usb 5-7: New USB device found, idVendor=1307, idProduct=0165 > [ 4.092691] usb 5-7: New USB device strings: Mfr=1, Product=2, > SerialNumber=3 > [ 4.092771] usb 5-7: Product: USB Mass Storage Device > [ 4.092847] usb 5-7: Manufacturer: USBest Technology > [ 4.092923] usb 5-7: SerialNumber: 080409589b3500 > [ 4.329376] usb 1-1: new full speed USB device using uhci_hcd and address > 4 > [ 4.489432] usb 1-1: configuration #1 chosen from 1 choice > [ 4.494086] usb 1-1: New USB device found, idVendor=c251, idProduct=1122 > [ 4.494086] usb 1-1: New USB device strings: Mfr=4, Product=28, > SerialNumber=60 > [ 4.494086] usb 1-1: Product: Esys HID/Memory > [ 4.494086] usb 1-1: Manufacturer: Eurobraille > [ 4.494086] usb 1-1: SerialNumber: Eurobraille Esys > [ 4.735426] usb 2-1: new full speed USB device using uhci_hcd and address > 2 > [ 4.909591] usb 2-1: configuration #1 chosen from 1 choice > [ 4.910335] usb 2-1: New USB device found, idVendor=0483, idProduct=2016 > [ 4.910335] usb 2-1: New USB device strings: Mfr=1, Product=2, > SerialNumber=0 > [ 4.910335] usb 2-1: Product: Biometric Coprocessor > [ 4.910335] usb 2-1: Manufacturer: STMicroelectronics > [ 5.557012] udevd version 125 started > [ 6.361506] Linux agpgart interface v0.103 > [ 6.623434] input: Power Button (FF) as /class/input/input1 > [ 6.686305] ACPI: Power Button (FF) [PWRF] > [ 6.686533] input: Lid Switch as /class/input/input2 > [ 6.719655] ACPI: Lid Switch [LID] > [ 6.719835] input: Power Button (CM) as /class/input/input3 > [ 6.777020] ACPI: Power Button (CM) [PWRB] > [ 6.777470] ACPI: AC Adapter [ADP1] (on-line) > [ 6.780969] ACPI: Battery Slot [BAT1] (battery present) > [ 6.780969] ACPI: Battery Slot [BAT2] (battery absent) > [ 6.925543] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection > driver for Linux, 1.2.26ks > [ 6.925543] iwl3945: Copyright(c) 2003-2008 Intel Corporation > [ 6.925543] ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 18 (level, low) -> > IRQ 18 > [ 6.925543] PCI: Setting latency timer of device 0000:05:00.0 to 64 > [ 6.925543] iwl3945: Detected Intel Wireless WiFi Link 3945ABG > [ 7.009914] iwl3945: Tunable channels: 13 802.11bg, 23 802.11a channels > [ 7.025543] phy0: Selected rate control algorithm 'iwl-3945-rs' > [ 7.025568] usbcore: registered new interface driver hiddev > [ 7.042232] hiddev96hidraw0: USB HID v1.00 Device [Eurobraille Esys > HID/Memory] on usb-0000:00:1d.0-1 > [ 7.042529] usbcore: registered new interface driver usbhid > [ 7.045542] usbhid: v2.6:USB HID core driver > [ 7.117545] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> > IRQ 22 > [ 7.117545] PCI: Setting latency timer of device 0000:00:1b.0 to 64 > [ 7.419008] ACPI: \_SB_.PCI0.FNC2.IDE1.HD_1: found ejectable bay > [ 7.419014] ACPI: \_SB_.PCI0.FNC2.IDE1.HD_1: Adding notify handler > [ 7.419043] ACPI: Error installing bay notify handler > [ 7.628382] input: PC Speaker as /class/input/input4 > [ 7.661168] ACPI: device:20 is registered as cooling_device2 > [ 7.661168] input: Video Bus as /class/input/input5 > [ 7.664536] ACPI: PCI interrupt for device 0000:05:00.0 disabled > [ 7.664536] Yenta: CardBus bridge found at 0000:06:0b.0 [1179:0001] > [ 7.664536] PCI: Bus 7, cardbus bridge: 0000:06:0b.0 > [ 7.664536] IO window: 0x00001000-0x000010ff > [ 7.664536] IO window: 0x00001400-0x000014ff > [ 7.664536] PREFETCH window: 0x54000000-0x543fffff > [ 7.664536] MEM window: 0x50000000-0x53ffffff > [ 7.664536] Yenta: Enabling burst memory read transactions > [ 7.664536] Yenta: Using CSCINT to route CSC interrupts to PCI > [ 7.664536] Yenta: Routing CardBus interrupts to PCI > [ 7.664536] Yenta TI: socket 0000:06:0b.0, mfunc 0x01aa1022, devctl 0x64 > [ 7.684454] intel_rng: FWH not detected > [ 7.724528] ACPI: Video Device [VGA] (multi-head: yes rom: yes post: > no) > [ 7.852311] Initializing USB Mass Storage driver... > [ 7.865176] scsi2 : SCSI emulation for USB Mass Storage devices > [ 7.865176] usbcore: registered new interface driver usb-storage > [ 7.865176] USB Mass Storage support registered. > [ 7.865176] usb-storage: device found at 4 > [ 7.865176] usb-storage: waiting for device to settle before scanning > [ 7.902054] Yenta: ISA IRQ mask 0x0cf8, PCI irq 21 > [ 7.902139] Socket status: 30000006 > [ 7.905161] Yenta: Raising subordinate bus# of parent bus (#06) from #07 > to #0a > [ 7.905161] pcmcia: parent PCI bridge I/O window: 0x1000 - 0x1fff > [ 7.905161] cs: IO port probe 0x1000-0x1fff: clean. > [ 7.905161] pcmcia: parent PCI bridge Memory window: 0xff900000 - > 0xff9fffff > [ 7.979026] tpm_inf_pnp 00:0a: Found TPM with ID IFX0102 > [ 7.979026] tpm_inf_pnp 00:0a: TPM found: config base 0x4e, data base > 0x680, chip version 0x000b, vendor id 0x15d1 (Infineon), product id 0x000b > (SLB 9635 TT 1.2) > [ 8.003029] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008) > [ 8.394826] cs: IO port probe 0x100-0x3af: excluding 0x378-0x37f > [ 8.399263] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7 > [ 8.399263] cs: IO port probe 0x820-0x8ff: clean. > [ 8.399263] cs: IO port probe 0xc00-0xcf7: clean. > [ 8.400213] cs: IO port probe 0xa00-0xaff: clean. > [ 8.507857] input: DualPoint Stick as /class/input/input6 > [ 8.552118] input: AlpsPS/2 ALPS DualPoint TouchPad as > /class/input/input7 > [ 8.601729] parport_pc 00:0d: reported by Plug and Play ACPI > [ 8.601729] iTCO_wdt: Found a ICH7-M TCO device (Version=2, > TCOBASE=0xd860) > [ 8.601729] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) > [ 8.601729] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE] > [ 9.548745] Adding 931728k swap on /dev/sda6. Priority:-1 extents:1 > across:931728k > [ 10.006859] EXT3 FS on sda3, internal journal > [ 10.444601] loop: module loaded > [ 10.705389] usb 1-1: usbfs: interface 0 claimed by usbhid while 'brltty' > sets config #1 > [ 10.761059] device-mapper: uevent: version 1.0.3 > [ 10.761059] device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: > [email protected] > [ 11.265987] fuse init (API version 7.9) > [ 12.898405] usb-storage: device scan complete > [ 12.898785] scsi 2:0:0:0: Direct-Access Ut165 USB2FlashStorage > 0.00 PQ: 0 ANSI: 2 > [ 12.899235] sd 2:0:0:0: [sdb] 7897088 512-byte hardware sectors (4043 MB) > [ 12.899730] sd 2:0:0:0: [sdb] Write Protect is off > [ 12.899730] sd 2:0:0:0: [sdb] Mode Sense: 00 00 00 00 > [ 12.899730] sd 2:0:0:0: [sdb] Assuming drive cache: write through > [ 12.903359] sd 2:0:0:0: [sdb] 7897088 512-byte hardware sectors (4043 MB) > [ 12.903887] sd 2:0:0:0: [sdb] Write Protect is off > [ 12.903887] sd 2:0:0:0: [sdb] Mode Sense: 00 00 00 00 > [ 12.903887] sd 2:0:0:0: [sdb] Assuming drive cache: write through > [ 12.903887] sdb: > [ 12.966988] sd 2:0:0:0: [sdb] Attached SCSI removable disk > [ 12.966988] sd 2:0:0:0: Attached scsi generic sg2 type 0 > [ 15.191274] eth1: Link is Up 100 Mbps Full Duplex, Flow Control: None > [ 15.191274] eth1: 10/100 speed: disabling TSO > [ 16.502119] NET: Registered protocol family 10 > [ 16.502119] lo: Disabled Privacy Extensions > [ 21.012782] warning: `avahi-daemon' uses 32-bit capabilities (legacy > support in use) > [ 23.026600] Bluetooth: Core ver 2.11 > [ 23.027442] NET: Registered protocol family 31 > [ 23.027442] Bluetooth: HCI device and connection manager initialized > [ 23.027442] Bluetooth: HCI socket layer initialized > [ 23.140604] Bluetooth: L2CAP ver 2.9 > [ 23.140688] Bluetooth: L2CAP socket layer initialized > [ 23.200024] Bluetooth: RFCOMM socket layer initialized > [ 23.200024] Bluetooth: RFCOMM TTY layer initialized > [ 23.200024] Bluetooth: RFCOMM ver 1.8 > [ 23.449137] ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 18 (level, low) -> > IRQ 18 > [ 23.449471] PM: Writing back config space on device 0000:05:00.0 at > offset 1 (was 100002, writing 100006) > [ 23.449772] firmware: requesting iwlwifi-3945-1.ucode > [ 23.533390] iwl3945: iwlwifi-3945-1.ucode firmware file req failed: > Reason -2 > [ 23.533390] iwl3945: Could not read microcode: -2 > [ 23.533390] ACPI: PCI interrupt for device 0000:05:00.0 disabled > [ 26.212058] ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 18 (level, low) -> > IRQ 18 > [ 26.212381] PM: Writing back config space on device 0000:05:00.0 at > offset 1 (was 100002, writing 100006) > [ 26.212664] firmware: requesting iwlwifi-3945-1.ucode > [ 26.223481] iwl3945: iwlwifi-3945-1.ucode firmware file req failed: > Reason -2 > [ 26.223481] iwl3945: Could not read microcode: -2 > [ 26.223481] ACPI: PCI interrupt for device 0000:05:00.0 disabled > [ 27.071382] eth1: no IPv6 routers present > [ 43.376043] ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 18 (level, low) -> > IRQ 18 > [ 43.376378] PM: Writing back config space on device 0000:05:00.0 at > offset 1 (was 100002, writing 100006) > [ 43.376693] firmware: requesting iwlwifi-3945-1.ucode > [ 43.385024] iwl3945: iwlwifi-3945-1.ucode firmware file req failed: > Reason -2 > [ 43.385024] iwl3945: Could not read microcode: -2 > [ 43.385024] ACPI: PCI interrupt for device 0000:05:00.0 disabled > [ 60.477544] ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 18 (level, low) -> > IRQ 18 > [ 60.477859] PM: Writing back config space on device 0000:05:00.0 at > offset 1 (was 100002, writing 100006) > [ 60.478153] firmware: requesting iwlwifi-3945-1.ucode > [ 60.488700] iwl3945: iwlwifi-3945-1.ucode firmware file req failed: > Reason -2 > [ 60.488700] iwl3945: Could not read microcode: -2 > [ 60.488700] ACPI: PCI interrupt for device 0000:05:00.0 disabled > [ 77.573509] ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 18 (level, low) -> > IRQ 18 > [ 77.573821] PM: Writing back config space on device 0000:05:00.0 at > offset 1 (was 100002, writing 100006) > [ 77.574118] firmware: requesting iwlwifi-3945-1.ucode > [ 77.584692] iwl3945: iwlwifi-3945-1.ucode firmware file req failed: > Reason -2 > [ 77.584692] iwl3945: Could not read microcode: -2 > [ 77.584692] ACPI: PCI interrupt for device 0000:05:00.0 disabled > [ 94.686850] ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 18 (level, low) -> > IRQ 18 > [ 94.690566] PM: Writing back config space on device 0000:05:00.0 at > offset 1 (was 100002, writing 100006) > [ 94.690583] firmware: requesting iwlwifi-3945-1.ucode > [ 94.697747] iwl3945: iwlwifi-3945-1.ucode firmware file req failed: > Reason -2 > [ 94.697747] iwl3945: Could not read microcode: -2 > [ 94.697747] ACPI: PCI interrupt for device 0000:05:00.0 disabled > [ 111.789737] ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 18 (level, low) -> > IRQ 18 > [ 111.790053] PM: Writing back config space on device 0000:05:00.0 at > offset 1 (was 100002, writing 100006) > [ 111.790363] firmware: requesting iwlwifi-3945-1.ucode > [ 111.797508] iwl3945: iwlwifi-3945-1.ucode firmware file req failed: > Reason -2 > [ 111.797594] iwl3945: Could not read microcode: -2 > [ 111.797784] ACPI: PCI interrupt for device 0000:05:00.0 disabled > [ 128.898828] ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 18 (level, low) -> > IRQ 18 > [ 128.899162] PM: Writing back config space on device 0000:05:00.0 at > offset 1 (was 100002, writing 100006) > [ 128.899393] firmware: requesting iwlwifi-3945-1.ucode > [ 128.907549] iwl3945: iwlwifi-3945-1.ucode firmware file req failed: > Reason -2 > [ 128.907549] iwl3945: Could not read microcode: -2 > [ 128.907549] ACPI: PCI interrupt for device 0000:05:00.0 disabled > > Merci d'avance > _______________________________________________ > Liste de diffusion CarrefourBLinuX > [email protected] > http://lists.freearchive.org/mailman/listinfo/carrefourblinux > Pour s'inscrire par courriel : > 'mailto:[email protected]?subject=subscribe' > Pour se retirer de la liste par courriel : > > 'mailto:[email protected]?subject=unsubscribe' > > Archives : http://lists.freearchive.org/pipermail//carrefourblinux > Anciennes archives (Yahoogroupes) : > http://fr.groups.yahoo.com/group/carrefourblinux/messages > Rechercher : http://lists.freearchive.org/cgi-bin/search.cgi > > Signets : http://fr.groups.yahoo.com/group/carrefourblinux/links/ > Fiches EDU : http://blinuxwiki.pbwiki.com/FichesEdu _______________________________________________ Liste de diffusion CarrefourBLinuX [email protected] http://lists.freearchive.org/mailman/listinfo/carrefourblinux Pour s'inscrire par courriel : 'mailto:[email protected]?subject=subscribe' Pour se retirer de la liste par courriel : 'mailto:[email protected]?subject=unsubscribe' Archives : http://lists.freearchive.org/pipermail//carrefourblinux Anciennes archives (Yahoogroupes) : http://fr.groups.yahoo.com/group/carrefourblinux/messages Rechercher : http://lists.freearchive.org/cgi-bin/search.cgi Signets : http://fr.groups.yahoo.com/group/carrefourblinux/links/ Fiches EDU : http://blinuxwiki.pbwiki.com/FichesEdu
