Ah well, i should pay better attention. I missed your comments at the end of
your previous message.
Concerning boundarylines error still showing up even after removing it, are
you running with profile = production ?
If so the caching system may be kicking. So either set profile = development
or launch a cw3setup --clean after each modification.
Regards
Oliver
Hi Kenton
What happens if you try to display the TownLines and Counties layers
separatly
(layers.root.children = AllMaine, Urban, Wetlands, TownLines, Counties,
water, roads) ?
your config file seems ok but it could be a problem with the boundarylines
children elements.
also you could try to change the name of the layergroup boundarylines,
maybe some weird conflict with a reserved keyword occure (I would be
surprised but one never know).
Regards
Oliver
Hello,
I modified my layers.ini file so that it is now:
layers.root.className = LayerGroup
layers.root.children = AllMaine, Urban, Wetlands, boundarylines, water,
roads
layers.root.rendering = tree
layers.AllMaine.className = Layer
layers.AllMaine.label = All of Maine
layers.Urban.className = Layer
layers.Urban.label = Urban Areas
layers.Wetlands.className = Layer
layers.Wetlands.label = Wetlands
layers.boundarylines.className = LayerGroup
layers.boundarylines.label = Boundary Lines
layers.boundarylines.children = TownLines, Counties
layers.boundarylines.rendering = tree
layers.TownLines.className = Layer
layers.TownLines.label = Town Lines
layers.Counties.className = Layer
layers.Counties.label = Counties
layers.water.className = LayerGroup
layers.water.label = Water Bodies
layers.water.children = BigWater, MedScaleWater, SmScaleWater
layers.water.aggregate = true
layers.BigWater.className = Layer
layers.BigWater.label = Large Waterbodies
layers.MedScaleWater.className = Layer
layers.MedScaleWater.label = Medium Detail Waterbodies
layers.SmScaleWater.className = Layer
layers.SmScaleWater.label = High Detail Waterbodies
layers.roads.className = LayerGroup
layers.roads.label = Roads
layers.roads.rendering = tree
layers.roads.children = LocalRds, SecRds, SpecRds, Interstate
layers.LocalRds.className = Layer
layers.LocalRds.label = Local Roads
layers.SecRds.className = Layer
layers.SecRds.label = Secondary Roads
layers.SpecRds.className = Layer
layers.SpecRds.label = Special Roads
layers.Interstate.className = Layer
layers.Interstate.label = Interstate
All of the layers are present in my mapfile, even the same case (ex:
TownLines rather than townlines). I get the exact same error message. I
tried deleting the boundarylines layerGroup entirely to have the layers
shown independently in the layer
tree. In spite of the fact that there is absolutely no mention of
boundarylines child layer in the layers.ini file, I STILL get the error
that the child layer boundarylines cannot be found. Do you have to
re-run the cw3setup.php every time after
making changes to the layers.ini file?
I have attached both my mapfile and my layers.ini file for reference.
Thanks very much for your assistance!
Kenton W.
--------------------------------------------------------------------------------
_______________________________________________
Cartoweb-users mailing list
[email protected]
http://lists.maptools.org/mailman/listinfo/cartoweb-users
_______________________________________________
Cartoweb-users mailing list
[email protected]
http://lists.maptools.org/mailman/listinfo/cartoweb-users
_______________________________________________
Cartoweb-users mailing list
[email protected]
http://lists.maptools.org/mailman/listinfo/cartoweb-users
