Hello,

Be careful about the attribute in the metadata
validUntil="2025-01-19T14:44:57Z"
This will unregister the application after this date.

Best regards.


Le sam. 18 janv. 2025 à 04:39, K. Asef Erfan <[email protected]> a
écrit :

> Hello ,
> just wanted post an update here that we got CAS working , Ill post our
> json and metadata incase anyone is implementing it in future, our CAS is
> v6.x for reference
> the service json is below (serviceid path names etc, redacted)
> {
> "@class": "org.apereo.cas.support.saml.services.SamlRegisteredService",
> "serviceId": " redacted  ",
> "name": " redacted  ",
> "id":  redacted  ,
> "description": "lol",
> "proxyTicketExpirationPolicy": {
> "@class":
> "org.apereo.cas.services.DefaultRegisteredServiceProxyTicketExpirationPolicy"
> },
> "usernameAttributeProvider": {
> "@class":
> "org.apereo.cas.services.PrincipalAttributeRegisteredServiceUsernameProvider",
> "usernameAttribute": "mail"
> },
> "serviceTicketExpirationPolicy": {
> "@class":
> "org.apereo.cas.services.DefaultRegisteredServiceServiceTicketExpirationPolicy"
> },
> "evaluationOrder": 27,
> "attributeReleasePolicy": {
> "@class": "org.apereo.cas.services.ReturnAllAttributeReleasePolicy"
> },
> "accessStrategy": {
> "@class": "org.apereo.cas.services.DefaultRegisteredServiceAccessStrategy",
> "requireAllAttributes": false
> },
> "metadataLocation": "/etc/ redacted  .xml",
> "signingCredentialType": "X509"
> }
>
> here is metadata.xml, the cert is redacted but make sure to use same cert
> for signing and encryption in metadata and we used signing cert for it,
>
> <?xml version="1.0"?>
> <md:EntityDescriptor xmlns:md="urn:oasis:names:tc:SAML:2.0:metadata"
> validUntil="2025-01-19T14:44:57Z" cacheDuration="PT604800S"
> entityID="redacted">
>   <md:SPSSODescriptor AuthnRequestsSigned="false"
> WantAssertionsSigned="false"
> protocolSupportEnumeration="urn:oasis:names:tc:SAML:2.0:protocol">
>     <md:KeyDescriptor use="signing">
>       <ds:KeyInfo xmlns:ds="http://www.w3.org/2000/09/xmldsig#";>
>         <ds:X509Data>
>           <ds:X509Certificate>redacted</ds:X509Certificate>
>         </ds:X509Data>
>       </ds:KeyInfo>
>     </md:KeyDescriptor>
>     <md:KeyDescriptor use="encryption">
>       <ds:KeyInfo xmlns:ds="http://www.w3.org/2000/09/xmldsig#";>
>         <ds:X509Data>
>           <ds:X509Certificate>redacted</ds:X509Certificate>
>         </ds:X509Data>
>       </ds:KeyInfo>
>     </md:KeyDescriptor>
>
> <md:NameIDFormat>urn:oasis:names:tc:SAML:1.1:nameid-format:emailAddress</md:NameIDFormat>
>     <md:AssertionConsumerService
> Binding="urn:oasis:names:tc:SAML:2.0:bindings:HTTP-POST"
> Location="redacted" index="1"/>
>   </md:SPSSODescriptor>
> </md:EntityDescriptor>
>
> On Friday, January 17, 2025 at 10:04:55 AM UTC-5 K. Asef Erfan wrote:
>
>> Hi, is there a way you could share your Atlassian Service json file, you
>> can edit out the serviceid for privacy reasons,
>>
>> for some reason in our cas, giving it "@class":
>> "org.apereo.cas.support.saml.services.SamlRegisteredService" causes it to
>> not be recognized by CAS as a valid aplication but if we change it to REGEX
>> registered service it is recognized but then it does not send out correct
>> POST to Atlassian which causes the Atlassian to fail the id.
>>
>> Thank you, we appreciate everyone's help here!
>>
>> On Tuesday, January 14, 2025 at 9:56:27 PM UTC-5 Neon Dazzle wrote:
>>
>>> I dont have access to my files right now, but I think everything needed
>>> is in this thread right now.
>>> If you have any specific question, maybe I can help.
>>>
>>> On Tue, Jan 14, 2025, 12:59 PM Mark Thompson <[email protected]>
>>> wrote:
>>>
>>>>
>>>> Hello
>>>>
>>>> Any chance you can share your setup , we have been fighting with CAS
>>>> and Atlassian for a bit.
>>>>
>>>> On Tuesday, December 3, 2024 at 9:36:42 AM UTC-5 Neon Dazzle wrote:
>>>>
>>>>> Hi everyone, I finally got it working.
>>>>> The attribute was the problem. I was passing email as a NameID as per
>>>>> the Atlassian doc, but it needs to be the primare attribute.
>>>>> This line made it work:
>>>>>
>>>>> {
>>>>> @class:
>>>>> org.apereo.cas.services.PrincipalAttributeRegisteredServiceUsernameProvider
>>>>> usernameAttribute: mail
>>>>> }
>>>>>
>>>>>
>>>>> Thank you so much to all of you for helping me with this. I appreciate!
>>>>>
>>>>> Have a nice day.
>>>>>
>>>>>
>>>>> Le lundi 18 novembre 2024 à 22:04:21 UTC-5, Ray Bon a écrit :
>>>>>
>>>>>> Neon,
>>>>>>
>>>>>> I wonder if the empty issuerEntityId could cause a problem. Remove it.
>>>>>> As Robert suggested, check the logs. Perhaps turn up logging for
>>>>>> opensaml.
>>>>>>
>>>>>> Ray
>>>>>>
>>>>>> On Mon, 2024-11-18 at 07:14 -0800, Neon Dazzle wrote:
>>>>>>
>>>>>> You don't often get email from [email protected]. Learn why this is
>>>>>> important <https://aka.ms/LearnAboutSenderIdentification>
>>>>>>
>>>>>> Thank you for your help, I changed the file and added the line as per
>>>>>> your suggestion:
>>>>>>
>>>>>> {
>>>>>> "@class":
>>>>>> "org.apereo.cas.support.saml.services.SamlRegisteredService",
>>>>>>
>>>>>>
>>>>>> "serviceId": "
>>>>>> https://auth.atlassian.com/saml/b87b0545-cb70-4fe0-8c96-61034fefb7cc
>>>>>> ",
>>>>>> "name": "JIRA",
>>>>>> "id": 1726778135108,
>>>>>> "description": "JIRA",
>>>>>> "proxyTicketExpirationPolicy": {
>>>>>> "@class":
>>>>>> "org.apereo.cas.services.DefaultRegisteredServiceProxyTicketExpirationPolicy"
>>>>>> },
>>>>>> "serviceTicketExpirationPolicy": {
>>>>>> "@class":
>>>>>> "org.apereo.cas.services.DefaultRegisteredServiceServiceTicketExpirationPolicy"
>>>>>> },
>>>>>> "evaluationOrder": 27,
>>>>>> "attributeReleasePolicy": {
>>>>>> "@class": "org.apereo.cas.services.ReturnAllAttributeReleasePolicy"
>>>>>> },
>>>>>> "accessStrategy": {
>>>>>> "@class":
>>>>>> "org.apereo.cas.services.DefaultRegisteredServiceAccessStrategy",
>>>>>> "requireAllAttributes": false
>>>>>> },
>>>>>> "metadataLocation": "/etc/cas/saml/jira-metadat.xml",
>>>>>> "issuerEntityId": "",
>>>>>> "signingCredentialType": "X509"
>>>>>> }
>>>>>>
>>>>>>
>>>>>> Unfortunately, I get the same error that the application is not
>>>>>> authorized to use CAS.
>>>>>> I can see the service on the gui:
>>>>>> [image: 314f2ac1-6df1-46ab-a35f-5bee1417b88c.PNG][image:
>>>>>> 6cd1e9a5-ab4d-4d16-9ea7-e3971a91b115.PNG]
>>>>>>
>>>>>> I'm very confused. I feel like everything is there. What am I missing?
>>>>>>
>>>>>> Le vendredi 15 novembre 2024 à 16:51:56 UTC-5, Ocean Liu a écrit :
>>>>>>
>>>>>> Please check
>>>>>> https://apereo.github.io/cas/7.1.x/services/SAML2-Service-Management.html
>>>>>> for the example.
>>>>>>
>>>>>> I think you are missing `"@class" :
>>>>>> "org.apereo.cas.support.saml.services.SamlRegisteredService",`
>>>>>>
>>>>>> On Fri, Nov 15, 2024 at 12:38 PM Neon Dazzle <[email protected]>
>>>>>> wrote:
>>>>>>
>>>>>> Thank you so much.
>>>>>> I changed endpoint and now it's telling my application is not
>>>>>> authorized to use CAS. It's weird because I can see the service entry 
>>>>>> when
>>>>>> I go to this endpoint:cas/actuator/registeredService
>>>>>>
>>>>>> {
>>>>>> "serviceId": "
>>>>>> https://auth.atlassian.com/saml/b87b0545-cb70-4fe0-8c96-61034fefb7cc
>>>>>> ",
>>>>>> "name": "JIRA",
>>>>>> "id": 1726778135108,
>>>>>> "description": "JIRA",
>>>>>> "proxyTicketExpirationPolicy": {
>>>>>> "@class":
>>>>>> "org.apereo.cas.services.DefaultRegisteredServiceProxyTicketExpirationPolicy"
>>>>>> },
>>>>>> "serviceTicketExpirationPolicy": {
>>>>>> "@class":
>>>>>> "org.apereo.cas.services.DefaultRegisteredServiceServiceTicketExpirationPolicy"
>>>>>> },
>>>>>> "evaluationOrder": 27,
>>>>>> "attributeReleasePolicy": {
>>>>>> "@class": "org.apereo.cas.services.ReturnAllAttributeReleasePolicy"
>>>>>> },
>>>>>> "accessStrategy": {
>>>>>> "@class":
>>>>>> "org.apereo.cas.services.DefaultRegisteredServiceAccessStrategy",
>>>>>> "requireAllAttributes": false
>>>>>> },
>>>>>> "metadataLocation": "/etc/cas/saml/jira-metadat.xml",
>>>>>> "issuerEntityId": "",
>>>>>> "signingCredentialType": "X509"
>>>>>> },
>>>>>>
>>>>>> I must be still missing something.
>>>>>> Le vendredi 15 novembre 2024 à 13:38:43 UTC-5, Ocean Liu a écrit :
>>>>>>
>>>>>> Neon, the Destination in the SAMLRequest does not look right.
>>>>>>
>>>>>> It should be something like
>>>>>> https://cas.example.com/idp/profile/SAML2/Redirect/SSO, please check
>>>>>> your IdP metadata <SingleSignOnService
>>>>>> Binding="urn:oasis:names:tc:SAML:2.0:bindings:HTTP-Redirect" part.
>>>>>>
>>>>>> And then, you need to change the Identity provider SSO URL in your
>>>>>> atlassian admin panel.
>>>>>> https://support.atlassian.com/security-and-access-policies/docs/configure-saml-single-sign-on-with-an-identity-provider/#Copy-details-from-your-identity-provider-to-your-Atlassian-organization
>>>>>> ​
>>>>>>
>>>>>> [image: SCR-20241115-ikwy.png]
>>>>>>
>>>>>> If you look at the dev tool, atlassian was probably redirecting the
>>>>>> client to the CAS home page (/cas), instead of the SSO page (
>>>>>> /cas/idp/profile/SAML2/Redirect/SSO), so the cas app does not know
>>>>>> to handle the parameters.
>>>>>>
>>>>>> Good luck!
>>>>>> ​
>>>>>> On Friday, November 15, 2024 at 8:46:18 AM UTC-8 Neon Dazzle wrote:
>>>>>>
>>>>>>
>>>>>> Thank you so much to both of you for your answers! It's very
>>>>>> appreciated.
>>>>>> I did more tests and I still can't get this to work. I get the same
>>>>>> result: I get sent to CAS from Atlassian, I enter my credentials, and 
>>>>>> then
>>>>>> I dont get sent back to Atlassian, I'm stuck in CAS. The message says 
>>>>>> that
>>>>>> I see this page because CAS doesnt know my final destination.
>>>>>> I installed samltracer as suggested to try and find my mistake but I
>>>>>> can't see it :(.
>>>>>>
>>>>>> Here is my metadata file:
>>>>>>
>>>>>> <?xml version="1.0"?>
>>>>>> <md:EntityDescriptor xmlns:md="urn:oasis:names:tc:SAML:2.0:metadata"
>>>>>> validUntil="2024-11-03T19:47:00Z" cacheDuration="PT604800S" entityID="
>>>>>> https://auth.atlassian.com/saml/b87b0545-cb70-4fe0-8c96-61034fefb7cc
>>>>>> ">
>>>>>>   <md:SPSSODescriptor AuthnRequestsSigned="false"
>>>>>> WantAssertionsSigned="false"
>>>>>> protocolSupportEnumeration="urn:oasis:names:tc:SAML:2.0:protocol">
>>>>>>     <md:KeyDescriptor use="signing">
>>>>>>       <ds:KeyInfo xmlns:ds="http://www.w3.org/2000/09/xmldsig#";>
>>>>>>         <ds:X509Data>
>>>>>>
>>>>>> <ds:X509Certificate>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</ds:X509Certificate>
>>>>>>         </ds:X509Data>
>>>>>>       </ds:KeyInfo>
>>>>>>     </md:KeyDescriptor>
>>>>>>     <md:KeyDescriptor use="encryption">
>>>>>>       <ds:KeyInfo xmlns:ds="http://www.w3.org/2000/09/xmldsig#";>
>>>>>>         <ds:X509Data>
>>>>>>
>>>>>> <ds:X509Certificate>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</ds:X509Certificate>
>>>>>>         </ds:X509Data>
>>>>>>       </ds:KeyInfo>
>>>>>>     </md:KeyDescriptor>
>>>>>>
>>>>>> <md:NameIDFormat>urn:oasis:names:tc:SAML:1.1:nameid-format:emailAddress</md:NameIDFormat>
>>>>>>     <md:AssertionConsumerService
>>>>>> Binding="urn:oasis:names:tc:SAML:2.0:bindings:HTTP-POST" Location="
>>>>>> https://auth.atlassian.com/login/callback?connection=saml-b87b0545-cb70-4fe0-8c96-61034fefb7cc";
>>>>>> index="1"/>
>>>>>>   </md:SPSSODescriptor>
>>>>>> </md:EntityDescriptor>
>>>>>>
>>>>>>
>>>>>> And here is the request I see using saml-tracer:
>>>>>>
>>>>>> <saml2p:AuthnRequest xmlns:saml2p=
>>>>>> "urn:oasis:names:tc:SAML:2.0:protocol" AssertionConsumerServiceURL="
>>>>>> https://auth.atlassian.com/login/callback?connection=saml-b87b0545-cb70-4fe0-8c96-61034fefb7cc
>>>>>> " Destination="https://cas6dev.polymtl.ca/cas"; ID=
>>>>>> "_c59ebaed7f8b7fbc8dd55d5b0afb84fb" IssueInstant=
>>>>>> "2024-11-15T15:59:41.525Z" ProtocolBinding=
>>>>>> "urn:oasis:names:tc:SAML:2.0:bindings:HTTP-POST" Version="2.0" > <
>>>>>> saml2:Issuer xmlns:saml2="urn:oasis:names:tc:SAML:2.0:assertion">
>>>>>> https://auth.atlassian.com/saml/b87b0545-cb70-4fe0-8c96-61034fefb7cc
>>>>>> </saml2:Issuer> <saml2p:NameIDPolicy AllowCreate="true" Format=
>>>>>> "urn:oasis:names:tc:SAML:1.1:nameid-format:emailAddress" /> </
>>>>>> saml2p:AuthnRequest>
>>>>>> Can you see any obvious mistake I am making?
>>>>>>
>>>>>> Le mardi 5 novembre 2024 à 23:38:01 UTC-5, Ray Bon a écrit :
>>>>>>
>>>>>> Neon,
>>>>>>
>>>>>> The Location and Binding protocol must match what is sent in the
>>>>>> request.
>>>>>> You can use a browser plugin like samltracer to see what the
>>>>>> request/response looks like.
>>>>>> Also check cas logs.
>>>>>>
>>>>>> Ray
>>>>>>
>>>>>> On Tue, 2024-11-05 at 10:44 -0800, Neon Dazzle wrote:
>>>>>>
>>>>>> You don't often get email from [email protected]. Learn why this is
>>>>>> important <https://aka.ms/LearnAboutSenderIdentification>
>>>>>>
>>>>>> Thank you so much for your answer.
>>>>>> I created the metadata file using a web service and added:
>>>>>>
>>>>>>     <md:AssertionConsumerService
>>>>>>                         index="1"
>>>>>>
>>>>>> Binding="urn:oasis:names:tc:SAML:2.0:bindings:HTTP-POST"
>>>>>>                         Location="https://atlassian.start.com"; />
>>>>>>
>>>>>> I'm still getting no redirection and I stay on the CAS website.
>>>>>>
>>>>>> Le lundi 4 novembre 2024 à 13:38:22 UTC-5, Ray Bon a écrit :
>>>>>>
>>>>>> Neon,
>>>>>>
>>>>>> ACS is required in metadata.
>>>>>> You can create the metadata file if the vendor does not supply it.
>>>>>> There are some online services that will help.
>>>>>>
>>>>>> Ray
>>>>>>
>>>>>> On Fri, 2024-11-01 at 12:17 -0700, Neon Dazzle wrote:
>>>>>>
>>>>>> You don't often get email from [email protected] why this is
>>>>>> important <https://aka.ms/LearnAboutSenderIdentification>
>>>>>>
>>>>>> Hi everyone, we have CAS6 and are trying to setup SSO with our
>>>>>> Atlassian org on the cloud. It seems like we almost have it, we get
>>>>>> redirected to CAS and the login works, but we can't get redirected to
>>>>>> Atlassian after, we are stuck in CAS.
>>>>>> It seems like there is not json parameters for redirection so I'm
>>>>>> wondering where we should put the ACS adresse given by Atlassian.
>>>>>> All our other services connected with CAS provide metadata files so
>>>>>> it's easy, but Atlassian doesnt provide that.
>>>>>> Has anyone been able to setup SSO with Atlassian Cloud?
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>> --
>>>>>>
>>>>>> Ocean Liu | Enterprise Web Developer | Whitman College
>>>>>> WCTS Building 105F - 509.527.4973 <(509)%20527-4973>
>>>>>>
>>>>>>
>>>> CONFIDENTIALITY NOTE <https://laurentian.ca/confidentiality> - AVIS:
>>>> COURRIEL CONFIDENTIEL.
>>>> You can view the confidentiality terms at
>>>> https://laurentian.ca/confidentiality. Notre avis de confidentialité
>>>> est disponible au site https://laurentienne.ca/avis
>>>
>>>
>> CONFIDENTIALITY NOTE <https://laurentian.ca/confidentiality> - AVIS:
>> COURRIEL CONFIDENTIEL.
>> You can view the confidentiality terms at
>> https://laurentian.ca/confidentiality. Notre avis de confidentialité est
>> disponible au site https://laurentienne.ca/avis
>
>
> CONFIDENTIALITY NOTE <https://laurentian.ca/confidentiality> - AVIS:
> COURRIEL CONFIDENTIEL.
> You can view the confidentiality terms at
> https://laurentian.ca/confidentiality. Notre avis de confidentialité est
> disponible au site https://laurentienne.ca/avis
>
> --
> - Website: https://apereo.github.io/cas
> - List Guidelines: https://goo.gl/1VRrw7
> - Contributions: https://goo.gl/mh7qDG
> ---
> You received this message because you are subscribed to the Google Groups
> "CAS Community" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to [email protected].
> To view this discussion visit
> https://groups.google.com/a/apereo.org/d/msgid/cas-user/e6532174-31a7-4b0f-9a73-06432369e534n%40apereo.org
> <https://groups.google.com/a/apereo.org/d/msgid/cas-user/e6532174-31a7-4b0f-9a73-06432369e534n%40apereo.org?utm_medium=email&utm_source=footer>
> .
>

-- 
- Website: https://apereo.github.io/cas
- List Guidelines: https://goo.gl/1VRrw7
- Contributions: https://goo.gl/mh7qDG
--- 
You received this message because you are subscribed to the Google Groups "CAS 
Community" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to [email protected].
To view this discussion visit 
https://groups.google.com/a/apereo.org/d/msgid/cas-user/CALmwvcZPy8fFO3SWzGBGq2CATxsGm-EHxXprLvsiZMHH7Bt%3Dxg%40mail.gmail.com.

Reply via email to