Tragically, this is it:
cas
base_url https://cas.clarku.edu/cas
auth_service_name Login
auth_service_friendly_name "Clark University Login"
non_blocking_redirection off
The sympa manual shows these as possible configuration values:
? auth_service_name
The authentication service name. Note that it is used as an identifier in the
code; it should therefore be made of alphanumeric characters only, with no
space.
? auth_service_friendly_name
If defined, this string is proposed on the web login banner.
? base_url
The base URL of the CAS server.
? non_blocking_redirection on | off
Default value: on
This parameter only concerns the first access to Sympa services by a user, it
activates or not the non blocking redirection to the related CAS server to
check automatically if the user as been previously authenticated with this CAS
server. The redirection to CAS is used with the CGI parameter gateway=1 that
specifies to CAS server to always redirect the user to the original URL, but
just check if the user is logged. If active, the SSO service is effective and
transparent, but in case the CAS server is out of order, the access to Sympa
services is impossible.
? login_path (OPTIONAL)
The login service path.
? service_validate_path (OPTIONAL)
The ticket validation service path.
? logout_path (OPTIONAL)
The logout service path.
Thanks for looking,
- Aaron
From: Scott Battaglia [mailto:[email protected]]
Sent: Tuesday, March 18, 2014 10:44 AM
To: [email protected]
Subject: Re: [cas-user] Possible perl-AuthCAS bug or client problem
Can you post a safe version of your perl-AuthCAS configuration? (remove any
sensitive/private information). I'm not familiar with the perl client but
someone here may be able to notice where the extra : and / are coming from.
On Tue, Mar 18, 2014 at 10:10 AM, Aaron Bennett
<[email protected]<mailto:[email protected]>> wrote:
Hi,
I apologize in advance for posting this to likely the wrong place, but I'm
looking to rule out a server config issue here. I'm working on enabling CAS
support in Sympa (an open-source listserve that uses perl-AuthCAS). Here's the
errors I'm seeing in the cas log:
Mar 18 09:11:43 odo-665 cas: INFO Audit trail record BEGIN
=============================================================
WHO: [email protected]<mailto:[email protected]>
WHAT:
ST-13-sPDJBVCa7YUP6bSrBorJ-cas.clarku.edu<http://ST-13-sPDJBVCa7YUP6bSrBorJ-cas.clarku.edu>
for http://testlists.clarku.edu/sso_login_succeeded/Login
ACTION: SERVICE_TICKET_CREATED
APPLICATION: CAS
WHEN: Tue Mar 18 09:11:43 EDT 2014
CLIENT IP ADDRESS: 140.232.0.61
SERVER IP ADDRESS: 10.6.65.22
=============================================================
Mar 18 09:11:43 odo-665 cas: ERROR ServiceTicket
[ST-13-sPDJBVCa7YUP6bSrBorJ-cas.clarku.edu<http://ST-13-sPDJBVCa7YUP6bSrBorJ-cas.clarku.edu>]
with service [http://testlists.clarku.edu/sso_login_succeeded/Login does not
match supplied service
[http://testlists.clarku.edu<http://testlists.clarku.edu>://sso_login_succeeded/Login]
Mar 18 09:11:43 odo-665 cas: INFO Audit trail record BEGIN
=============================================================
WHO: audit:unknown
WHAT:
ST-13-sPDJBVCa7YUP6bSrBorJ-cas.clarku.edu<http://ST-13-sPDJBVCa7YUP6bSrBorJ-cas.clarku.edu>
ACTION: SERVICE_TICKET_VALIDATE_FAILED
APPLICATION: CAS
WHEN: Tue Mar 18 09:11:43 EDT 2014
CLIENT IP ADDRESS: 140.232.1.46
SERVER IP ADDRESS: 10.6.65.22
=============================================================
Does anyone have a guess where that extra ":" is coming from in the supplied
service ID? I'm using perl-AuthCAS-1.5.2 on Centos 6.
-Aaron
---
Aaron Bennett
Manager of Systems Administration
Clark University ITS
W:508.793.7315<tel:508.793.7315>
--
You are currently subscribed to
[email protected]<mailto:[email protected]> as:
[email protected]<mailto:[email protected]>
To unsubscribe, change settings or access archives, see
http://www.ja-sig.org/wiki/display/JSG/cas-user
--
You are currently subscribed to
[email protected]<mailto:[email protected]> as:
[email protected]<mailto:[email protected]>
To unsubscribe, change settings or access archives, see
http://www.ja-sig.org/wiki/display/JSG/cas-user
--
You are currently subscribed to [email protected] as:
[email protected]
To unsubscribe, change settings or access archives, see
http://www.ja-sig.org/wiki/display/JSG/cas-user
