Please use the NH2.0 branch. I just updated it to current trunk (building on net-2.0 with nant 0.85).
I will keep updating it from time to time until 1.0 is released. This one does not use NH trunk, but 2.0.1 GA. This means you can use NH Contrib, but there are minor differences to Castle trunk, which uses a patched trunk version of NH. -Markus 2008/10/20 [EMAIL PROTECTED] <[EMAIL PROTECTED]> > > Any news on fixing the build for 2.0? > > On Oct 16, 9:21 pm, "Ken Egozi" <[EMAIL PROTECTED]> wrote: > > well that's a different issue, as currently 2.0 isn't working due to the > > introduction of RWL_Slim > > > > btw, are we going to revert that, or to put an IFDEF in? > > > > > > > > On Thu, Oct 16, 2008 at 10:17 PM, David <[EMAIL PROTECTED]> wrote: > > > > > Sort of. It says: > > > > > Everything should compile fine using NAnt 0.85 final. > > > You can find the latest version athttp://nant.sourceforge.net/ > > > > > for targeting 3.5, it's recommended you use NAnt 0.68b2 nightly build > > > (current version is 0.86.3075.0 from 02/06/2008 and can be downloaded > > > from the said location). > > > > > When I first tried to build I was targeting 2.0. > > > > > On Oct 16, 1:29 pm, "Ken Egozi" <[EMAIL PROTECTED]> wrote: > > > > btw, not to nag, but Im pretty sure it's in the "How to build.txt" > file > > > > > > On Thu, Oct 16, 2008 at 2:07 AM, David <[EMAIL PROTECTED]> > wrote: > > > > > > > That worked! with the NAnt Nightly Build (shows as 0.86-nightly) > in > > > > > my path I can successfully build the Castle trunk using "nant quick > > > > > rebuild". > > > > > > > Many thanks for the help, guys. > > > > > > > On Oct 16, 11:02 am, "Ken Egozi" <[EMAIL PROTECTED]> wrote: > > > > > > you'd need NANT .86b2 > > > > > > this can be found on NANT site (it's nant.sourceforge.org I > think). > > > in > > > > > the > > > > > > bottom of the left menubar, there are downloads. > > > > > > go to Nightly Build (these are 0.86b2 bits) - download the > binary, > > > put it > > > > > in > > > > > > the path, and then "nant quick rebuild" will work. > > > > > > > > On Wed, Oct 15, 2008 at 9:55 PM, David <[EMAIL PROTECTED]> > > > wrote: > > > > > > > > > Great! That download link works. It's useful that the source > code > > > is > > > > > > > zipped up in there as well. > > > > > > > > > Thanks. > > > > > > > > > On Oct 16, 12:08 am, "Ken Egozi" <[EMAIL PROTECTED]> wrote: > > > > > > > > The quickest (and dirtiest) way would be to: > > > > > > > > > > 1. go to the download page > > > > > > > > 2. copy the download url > > > > > > > > 3. switch the 2.0 bit with 3.5 > > > > > > > > 4. download and have (lots of) fun using Castle > > > > > > > > > > the latest build is athttp:// > > > > > > > > builds.castleproject.org/builds/castleproject-1.1-build_973-ne... > > > > > > > > > > On Wed, Oct 15, 2008 at 1:02 PM, Ernst Naezer < > > > [EMAIL PROTECTED] > > > > > > > > > wrote: > > > > > > > > > > > Hi David, > > > > > > > > > > > sorry you didn't succeed in getting up & running very fast. > I > > > > > looked > > > > > > > > > at the build server, and I believe somewhere last week > there we > > > > > made a > > > > > > > > > change so that it compiles by default using the .net 3 > > > compiler, > > > > > which > > > > > > > > > probably outputs to a different zip file that doesn't get > > > picked up > > > > > by > > > > > > > > > the build server, so you need to compile from code. > > > > > > > > > > > The quickest way to do that is using the command; > > > > > > > > > > > nant quick rebuild > > > > > > > > > > > this skips the tests, but that's fine since they also get > run > > > by > > > > > our > > > > > > > > > buildserver. > > > > > > > > > > > The ReaderWriterLockSlim is something that is only present > at > > > the > > > > > 3.5 > > > > > > > > > framework and was committed a couple of days ago and > pending > > > > > > > > > discussion. > > > > > > > > > > > So, to sum up, you need to latest .net framework and nant > 0.86 > > > > > > > > > (nightly build os something) > > > > > > > > > > > Hope this helps a bit. > > > > > > > > > > > cheers, > > > > > > > > > Ernst. > > > > > > > > > > > On Wed, Oct 15, 2008 at 12:40 PM, David < > > > [EMAIL PROTECTED]> > > > > > > > wrote: > > > > > > > > > > > > Apologies if this is a stupid question. At the moment > I'm > > > just > > > > > > > trying > > > > > > > > > > to get my head around Monorail/ActiveRecord, etc. I'd > like > > > to > > > > > play > > > > > > > > > > with the trunk version but I can't work out how to get > hold > > > of a > > > > > > > > > > working copy. > > > > > > > > > > > > I tried to download the latest build from, say, > > > > >http://builds.castleproject.org/cruise/DownloadBuild.castle?number=973 > > > > > > > > > > but all I get is a 1.4Kb empty zip file. > > > > > > > > > > > > I also tried to download the source code from SubVersion > and > > > > > build > > > > > > > > > > using something like > > > > > > > > > > nant -D:common.testrunner.enabled=false > > > > > > > > > > or > > > > > > > > > > nant -D:project.config=release > > > -D:common.testrunner.enabled=false > > > > > > > > > > but I get build errors (something to do with > > > > > ReaderWriterLockSlim). > > > > > > > I > > > > > > > > > > tried on the last 4 or 5 revisions. > > > > > > > > > > > > What's the best way of getting an up-to-date copy? I > don't > > > > > really > > > > > > > > > > need to build source code at this point, I just want to > be > > > able > > > > > to > > > > > > > > > > play with coding on top of the framework. > > > > > > > > > > > > Many thanks. > > > > > > > > > > -- > > > > > > > > Ken Egozi. > > > > >http://www.kenegozi.com/bloghttp://www.musicglue.comhttp://www.castle. > > > > > .. > > > > > > > > -- > > > > > > Ken Egozi. > > > > > > http://www.kenegozi.com/bloghttp://www.musicglue.comhttp://www.castle. > > > .. > > > > > > -- > > > > Ken Egozi. > > >http://www.kenegozi.com/bloghttp://www.musicglue.comhttp://www.castle. > .. > > > > -- > > Ken Egozi. > http://www.kenegozi.com/bloghttp://www.musicglue.comhttp://www.castleproject.orghttp://www.gotfriends.co.il > > > --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "Castle Project Users" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [EMAIL PROTECTED] For more options, visit this group at http://groups.google.com/group/castle-project-users?hl=en -~----------~----~----~----~------~----~------~--~---
